SBL2030CT_2 DIODES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Schottky Barrier Chip
  • Guard Ring Die Constructi on for Transient Protection
  • Low Power Loss, High Efficiency
  • High Surge Capability
  • High Current Capability and Low Forward Voltage Drop
  • For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications
  • Lead Free Finish, RoHS Compliant (Note 3) Mechanical Data
  • Case: TO-220AB
  • Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020D
  • Polarity: As Marked on Body
  • Terminals: Finish – Tin. Solderable per MIL-STD-202, Method 208
  • Marking: Type Number
  • Weight: 2.24 grams (approximate) L M A N P D E K C B G 12 3 J HH Pin 1 + Pin 3 + Pin 2 - Case TO-220AB Dim Min Max A 14.48 15.75 B 10.00 10.40 C 2.54 3.43 D 5.90 6.40 E 2.80 3.93 G 12.70 14.27 H 2.40 2.70 J 0.69 0.93 K 3.54 3.78 L 4.07 4.82 M 1.15 1.39 N 0.30 0.50 P 2.04 2.79 All Dimensions in mm Maximum Ratings and Electrical Characteristics @TA = 25°C unless otherwise specified Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol SBL 2030CT SBL 2035CT SBL 2040CT SBL 2045CT SBL 2050CT SBL 2060CT Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 30 35 40 45 50 60 V RMS Reverse Voltage VR(RMS) 21 24.5 28 31.5 35 42 V Average Rectified Output Current (Note 1) @ TC = 95°C IO 20 A Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load IFSM 250 A Forward Voltage Drop @ IF = 10A, TC = 25°C VFM 0.55 0.75 V Peak Reverse Current @ TC = 25°C at Rated DC Blocking Voltage @ TC = 100°C IRM 1.0 50 mA Typical Junction Capacitance (Note 2) Cj 650 pF Typical Thermal Resistance Junction to Case (Note 1) RθJC 2.8 °C/W Operating and Storage Temperature Range TJ, TSTG -65 to +150 °C Notes: 1. Thermal resistance junction to case mounted on heatsink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 3. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied, see EU Directive 2002/95/EC Annex Notes.

DS23015 Rev. 9 - 2 2 of 3 www.diodes.com SBL2030CT - SBL2060CT © Diodes Incorporated 05 0 1 00 1 50 I, A V E RAGE FORWARD CURRENT (A)(A V) T , CASE TEMPERATURE ( C) Fig. 1 Forward Current Derating Curve C ° 0.1 1.0 I, I N STANTANEOUS FORWARD CURRENT (A)F V , INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Voltage F 100 150 200 250 300 11 0 1 00 I, PEAK FORWARD CURRENT (A)FSM NUMBER OF CYCLES AT 60Hz Fig. 3 Maximum Non-Repetitive Surge Current 100 1,000 4,000 0.1 1.0 10 100 C , CAPACITANCE (pF)j V , REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance R T = 2 5 C f = 1.0MHz j ° 0.01 0.1 1.0 100 0 40 80 120 I, I N STANTANEOUS REVERSE CURRENT (mA)R PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics T = 100°Cj T = 75°Cj T = 25°Cj

DS23015 Rev. 9 - 2 3 of 3 www.diodes.com SBL2030CT - SBL2060CT © Diodes Incorporated Ordering Information (Note 4) Device Packaging Shipping SBL20xxCT* TO-220AB 50/Tube * xx = Device type, e.g. SBL2045CT IMPORTANT NOTICE Diodes Incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to any product herein. Diodes Incorporat ed does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its paten t rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Inco rporated and all the companies whose products ar e represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.