SBC347A ELMA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Single slot 3U VPX single board computer
- 5th Generation Intel® Core™ i7 quad core processor (6 MB shared cache)
- Two channels of soldered DDR3L SDRAM with ECC up to 16 GB
- Up to 32 GB NAND Flash
- Rear I/O – 2x 10GBASE-T ports (also configurable as 2x 1000BASE-T) – 1x VGA port – 1x DVI port – 3x SATA 6 Gb/s ports – 2x COM ports – 4x USB 2.0 ports – Up to 8x GPIO
- Five levels of ruggedization (convection and conduction cooling variants)
- AXIS and Deployed Test Software
- Microsoft ® Windows®, Open Linux® and VxWorks® support The SBC347A Rugged Single Board Computer (SBC) from GE Intelligent Platforms features the high performance, highly integrated 5th Generation Core i7 processor platform from Intel. The 5th Generation Core i7 offers integrated graphics and memory controller plus quad core processing up to 2.7 GHz all in one device. Coupled with the Mobile Intel QM87 Express Chipset, this provides an unmatched level of I/O bandwidth for both on-board and off-board functions. Features of the 5th Generation Core i7
- Graphics support for DX11.1, OpenCL 1.2, OpenGL 3.2
- 5 to 15% CPU performance boost over 4th generation
- Intel TurboBoost Technology
- Intel AVX 2.0 extensions and AES-NI instructions
- Hardware-assisted security features
- Hyper-Threading Technology – two threads per core The SBC347A is designed to offer maximum PCIe ® bandwidth to the backplane with a total of 14 (x8, x4, x2) PCIe lanes across the P1 and P2 connectors. Memory resources include 16 GB DDR3L SDRAM, up to 32 GB NAND Flash (SSD),
32 MB BIOS Flash and 16 MB BIOS backup
Flash. The SBC347A is designed to meet the requirements of a wide range of applications from industrial through to fully rugged defense and aerospace programs. It offers extended temperature capability and a range of air- and conduction-cooled build levels. A rich software choice is planned for the SBC347A, including comprehensive Deployed Test Software (FSP-enabled BIT, and BCS) plus operating system support for Microsoft Windows 7, Open Linux (Fedora), Red Hat ® Enterprise Linux, Wind River Linux, and VxWorks. Examples and assistance are also available for integrating ‘chain of trust’ operation (from power-up to application start), plus Wind River’s FSP-enabled VxWorks Boot Loader, into system scenarios. SBC347A 5th Generation Intel® Core™ i7 Based Rugged VPX Single Board Computer
GE Intelligent Platforms, Inc. is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company. © 2015 GE Intelligent Platforms, Inc. All other trademarks are the property of their respective owners.
06.15 GFA2078
12090 Memorial Parkway SW
Huntsville, AL, 35803 1-800-433-2682 or 1-434-978-5100 www.geembedded.com Specifications Processor
- Intel 5th Generation Core i7 Processor
- i7-5850EQ (Quad Core) @ 2.7 GHz (47W) base frequency, up to 3.4 GHz TurboBoost (Note: CPU speed is dependent on environment, consult manual for details)
- 14 nm monolithic die processing technology
- 6 MB Last Level Cache SDRAM
- 16 GB DDR3L SDRAM soldered with ECC Non-Volatile RAM
- 512 kB FRAM On Board Solid State Disk Drive (SSD)
- Up to 32 GB BIOS
- 2x 16 Mb SPI Flash for BIT and BIOS plus 1x 16 MB SPI Flash for Recovery Fabric Interface
- x4 PCIe Gen 3 to P1
- x4 PCIe Gen 3 to P2
- x2 PCIe Gen 2 to P1
- x4 PCIe Gen 2 to P2 Control Plane (Gig Ethernet)
- Dual 10Gigabit Ethernet interface via Intel’s X540
- 10Gigabit Ethernet controllers – routed to VPX P1
- ETH0 and ETH1 are configured as 10GBASE-T by default. They can also be configured as 1000BASE-T. Management Plane
- Baseboard Management Controller (BMC) in accordance with VITA 46.11 Tier 1 USB Ports
- Four USB 2.0 ports are routed to P1 connector Serial Ports
- Two 16550 compatible async serial ports are available on P1
- COM1 and COM2 can be configured as a 4-wire RS-232 port or an RS-422 port with TxD/RxD
- COM2 shares pins with various ancillary signals and can be configured as a 2-wire RS-232 port or a 4-wire RS-232/422 port Video
- One VGA port routed to P2
- One DVI port routed to P2 SATA
- Three SATA ports (SATA0, SATA1, SATA2) are available on P1 and P2. All ports are 6 Gb/s capable
- One SATA port is routed to P1
- Two SATA ports are routed to P2. SATA2 port shares pins with other functions GPIO
- Up to 8 GPIO pins (5V Tolerant) all of which share pins with other functions – so number is dependent on variant selected LED
- 3x status LEDs and four BIT status Power Requirements
- +5V (Vs3) for main power
- +3.3V for P3V3_AUX is required OpenVPX Profile Compatibility
- MOD3-PAY-2F2T-16.2.5-3 (1000BASE-T control plane is capable of 10GBASE-T operation) NVRAM / Watchdog / Timers / TPM / ETI / IPMI
- 512kB non-volatile RAM (MRAM)
- 2x 32-bit timers and a watch dog timer
- Timers in FPGA (SW programmable)
- TPM (Trusted Platform Monitor)
- ETI (Elapsed Time Indicator) Temperature Sensor
- Board, CPU and PCIe switch temperature sensors Other Hardware Features
- Hardware Write Protection
- IPMI Transition Module
- SBC340RTM (6U high for use in SCVPX3U starter cage) Environmental Level 1 Level 2 Level 3 Level 4 Level 5 Cooling Method Convection Convection Convection Conduction Conduction Conformal Coating Optional Standard Standard Standard Standard High/Low Temp 0 to +55°C -20 to +65°C -40 to +75°C -40 to +85°C -40 to +85°C Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz From 10 to 1000 Hz ***Peak sawtooth 11 ms duration Note: Processor performance and temperature are inter-dependent. For a given temperature, a maximum speed is achievable, and conversely for a given processor speed a maximum temperature is achievable. Consult the product manual for details. Block Diagram P0P2 P1 PCH QM87 CPU 5th Gen Core i7 DDR3 up to 8GB 72bit DDR3 up to 8GB 72bit X540 (10GBT MAC/PHY) Magnetics Sensors TPM SSD Up to 32GB SF2 FPGA DVI DVI SATA SATA x1 COM 1 & 2 USB x4 SATA x1 SATA x1 SATA x2 VGA LPC IPMI - to P0 IPMI IPMI PCIe REFCLK VPX REFCLK 8x GPIO Lanes 4-7 Lanes 0-3 10GBT x4 (GEN2) x2 (GEN2) (GEN3) (GEN2) FDI DMI COM 1 & 2