SBC326 ELMA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Features
- Single slot 3U VPX Single Board Computer
- 4th Generation Intel Core i7 quad core processor (6 MB shared cache)
- Two channels of soldered DDR3 SDRAM with ECC up to 16 GB
- Up to 32 GB NAND Flash
- XMC Site (x8 PCIe Gen 3 capable)
- Rear IO: - Up to 3 Gigabit Ethernet Ports (either one 1000BaseT plus two 1000BaseBX or two 1000BaseT) - 1x DVI / HDMI as standard (plus an additional DVI/HDMI port on some variants) - 1x SATA 6 Gb/s port as standard (plus additional two SATA 6 Gb/s ports on some variants) - 2x COM ports - 2x USB 2.0 ports (plus an additional USB 3.0 port on some variants) - Audio (available on some variants) - Up to 6x GPIO
- Five Levels of Ruggedization (Convection and conduction cooling variants)
- AXIS and Deployed Test Software
- Windows®, Linux® and VxWorks OS support The SBC326 Rugged Single Board Computer (SBC) from GE Intelligent Platforms features the high performance, highly integrated 4th Generation Core i7 processor platform from Intel. 4th Generation Core i7 offers integrated graphics and memory controller plus quad core processing up to 2.4 GHz all in one device. Coupled with the Mobile Intel QM87 Express Chipset, this provides an unmatched level of I/O bandwidth for both on-board and off-board functions. Features of the 4th Generation Core i7
- Graphics support for DX11.1, OpenCL 1.2, OpenGL 3.2
- 5 to 15% CPU performance boost over 3rd generation
- Intel TurboBoost Technology
- Intel AVX 2.0 extensions and AES-NI instructions
- Hardware assisted security features
- Hyper-Thread Technology – 2 threads per core SBC326 4th Generation Intel® Core™ i7 Based Rugged 3U VPX Single Board Computer In addition to a comprehensive range of onboard I/O features, the SBC326 also offers an on-board mezzanine expansion site for enhanced system flexibility. Memory resources include up to 16 GB DDR3 SDRAM, up to 32 GB NAND Flash (SSD), 32 MB BIOS Flash and 16 MB BIOS backup Flash. The SBC326 is designed to meet the requirements of a wide range of applications from industrial through to fully rugged Defense and Aerospace programs. It offers extended temperature capability and a range of air and conduction cooled build levels. A rich software choice is planned for the SBC326, including comprehensive Deployed Test Software (BIT and BCS) and AXIS, plus OS support for Windows 7, Open Linux, Wind River Linux, VxWorks®.
06.13 GFA-1954
GE Intelligent Platforms Contact Information Americas: 1 800 433 2682 or 1 434 978 5100 Global regional phone numbers are listed by location on our web site at defense.ge-ip.com/contact defense.ge-ip.com ©2013 GE Intelligent Platforms, Inc. All rights reserved. All other brands or names are property of their respective holders. Specifications are subject to change without notice. About GE Intelligent Platforms GE Intelligent Platforms is a division of GE that offers software, control systems, services, and expertise in automation and embedded computing. We offer a unique foundation of agile and reliable technology providing customers a sustainable competitive advantage in the industries they serve, including energy, water, consumer packaged goods, oil and gas, government and defense, and telecommunications. GE Intelligent Platforms is headquartered in Charlottesville, VA. For more information, visit www.ge-ip.com. 4th Generation Intel® Core™ i7 Based Rugged 3U VPX Single Board Computer Specifications Processor
- Intel 4th Generation Core i7 Processor
- i7-4700EQ (Quad Core) @ 2.4 GHz (47W) base frequency, up to 3.4 GHz TurboBoost (Note: CPU speed is dependent on environment, consult manual for details)
- 22 nm monolithic die processing technology
- 6 MB Last Level Cache SDRAM
- Up to 16 GB DDR3 SDRAM soldered with ECC Non-Volatile RAM
- 512 kB FRAM On Board Solid State Disk Drive (SSD)
- Up to 32 GB BIOS
- 2x 16 MB SPI Flash for BIT and BIOS plus 1x 16 MB SPI Flash for Recovery Data Plane / Expansion plane
- 8 lanes of Gen-3 capable PCI-Express to P1, can be configured as one x8 or two x4 ports
- PCIe REFCLK can be driven or received Control Plane (Gig Ethernet)
- ETH0 is driven from QM87 (VPRO compliant) to P1 and is always configured as 1000BaseT
- ETH1 and ETH2 are routed to P1 and are configured as 1000BaseBX by default. Optionally ETH1 can be configured as 1000BaseT and ETH2 is then unused. Management Plane
- Baseboard Management Controller (BMM) in accordance with VITA 46.11 USB Ports
- Two USB 2.0 ports (USB0, USB1) are routed to P1 connector and are available on all variants.
- One additional USB 3.0 port (USB2) is routed to P2 but shares pins with XMCIO – so is only available on selected variants Serial Ports
- Two 165C50 compatible async serial ports are available on P1 and P2
- COM1 is 2-wire RS-232 port
- COM2 shares pins with GPIO lines and can be configured as a 2-wire RS-232 port, a 4-wire RS- 232/422 port or as not present XMC Site
- x8 PCIe Gen 3 capable
- Tracked as P2w1-X24s+X8d+X12d in accordance with VITA 46.9
- X12d is always available
- X8d shares pins with DVI2
- X24s shares pins with SATA1, SATA2 and USB2 Audio
- High Definition Audio Controller and Codec
- Stereo line in and stereo line out
- Available as an option in place of ETH0 Video
- One DVI / HDMI port (DVI0) routed to P2
- One additional DVI / HDMI port (DVI1) is routed to P2 but shares pins with XMCIO – so is only available on selected variants SATA
- One SATA ports (SATA0) always available on P1
- Two additional SATA ports (SATA1, SATA2) are routed to P2 but shares pins with XMCIO – so is only available on selected variants
- All three ports are SATA6 Gb/s capable Block Diagram Environmental Lev el 1 Lev el 2 Lev el 3 Lev el 4 Lev el 5 Cooling Method Convection Convection Convection Conduction Conduction Conformal Coating Optional Standard Standard Standard Standard High/Low Temp 0 to 55°C -20 to +65°C -40 to +75°C -40 to +75°C -40 to +85°C Operational (300 ft/m) (300 ft/m) (600 ft/m) At cold wall At cold wall With a flat response to 1000 Hz, 6 dB/Oct roll-off from 1000 to 2000 Hz From 10 to 1000 Hz ***Peak sawtooth 11 ms duration Note: Processor performance and temperature are inter-dependent. For a given temperature, a maximum speed is achievable, and conversely for a given processor speed a maximum temperature is achievable. Consult the product manual for details. GPIO
- Up to 6 GPIO pins (5V Tolerant) all of which share pins with other functions – so number is dependent of vari- ant selected LED
- 3x status LEDs and four BIT status Power Requirements
- +5V (Vs3) and +3.3V (Vs2) for main power
- +3.3V for P3V3_AUX is required
- +/-12V AUX only required for mezzanines OpenVPX Profile Compatibility
- MOD3-PAY-2F2T-16.2.5-3 (Board configured for 2x 1000BaseT ports)
- MOD3-PAY-2F2U-16.2.3-3 (Board configured for 2x 1000BaseBX ports) Watchdog/ Timers/ TPM / ETI
- Software programmable watchdog
- Timers in PCH (SW programmable)
- TPM (Trusted Platform Monitor)
- ETI (Elapsed Time Indicator) Temperature Sensor
- PCB, CPU and PCIe Switch temperature sensors Other HW Feature
- Hardware Write Protection Transition Modules
- VPX3UX301 (3U high RTM for use with OpenVPX backplanes)
- VPX3UX601 (6U high for use in SCVPX3U starter cage) GPIO COM 1 SM - BUS COM 2 x4 PCIe 1x 1000BaseT 1x USB2x SATA1x DVI x8 PCle SATA SPI DMI FDI x8 PCle Or Audio 1x 1000BaseT or 2x 1000BaseBX 1x COM 2 Up to 6 GPlO 1x USB 2x SATA 1x DVI XMC IO 2x USB SATA COM 1 DVI x4 PCIe QM87 XMC Site UEFI FLASH DDR3 DDR3 MRAM TPM BMM Audio Codec Gig E PHY 2x Gig E MAC / PHY Build Option ETI x24 PCle Switch CPLD / FPGA NAND FLASH Build Options 4th Generation Core i7