SBB3089Z STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 9

Technical content

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 1 of 9 www.qorvo.com 3-pin SOT−89 Package Product Overview The SBB3089Z is a high performance InGaP HBT MMIC amplifier utilizing a Darlington configuration with an active bias network. The active bias network provides stable current over temperature and process Beta variations. The SBB3089Z product is designed for high linearity 5V gain block applications that require excellent gain flatness, small size, and minimal external components. It is internally matched to 50Ω. Functional Block Diagram Top View Key Features

  • 50MHz – 6000MHz Operational Frequency
  • Patented Thermal Design and Self Bias Circuit
  • Gain = 16.4dB at 1950MHz
  • P1dB = +15.2dBm at 1950MHz
  • OIP3 = +29.5dBm at 1950MHz
  • Single Fixed 5V Supply
  • Robust 1000V ESD, Class 1C HBM

Ordering Information

Part No. Description SBB3089Z 7” Reel with 1000 pieces SBB3089ZPCK1 500MHz to 3500MHz PCBA with 5-piece sample bag

Applications

  • PA Driver Amplifier
  • Cellular, PCS, GSM, UMTS
  • IF Amplifier
  • Wireless Data, Satellite
  • Wideband Instrumentation

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 2 of 9 www.qorvo.com Absolute Maximum Ratings Parameter Rating Storage Temperature −55 to 150 °C RF Input Power, CW, 50 Ω, T=+25 °C +20 dBm Device Voltage (VCC) +6 V Device Current (ICC) 100 mA Junction Temperature (TJ) +150 °C Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Recommended Operating Conditions Parameter Min Typ Max Units TCASE −40 +85 °C Electrical specifications are measured at specified test conditions. Specifications are not guaranteed over all recommended operating conditions. Application of conditions to the device outside the Recommended Operating Conditions may reduce device reliability and performance. Electrical Specifications Parameter Conditions (1) Min Typ Max Units Operational Frequency Range 50 6000 MHz Gain 850MHz 15.1 16.6 18.1 dB 1950MHz 14.9 16.4 17.9 dB 2400MHz 16.3 dB Input Return Loss 1950MHz 16 21 dB Output Return Loss 1950MHz 19 25.5 dB Output P1dB 850MHz +15.6 dBm 1950MHz +14.2 +15.2 dBm 2400MHz +15.4 dBm Output IP3 Pout= -5 dBm/tone, ∆f = 1 MHz, Center Freq.= 850MHz +30 dBm Pout= -5 dBm/tone, ∆f = 1 MHz, Center Freq.= 1950MHz +27.5 +29.5 dBm Pout= -5 dBm/tone, ∆f = 1 MHz, Center Freq.= 2400MHz +29.5 dBm Noise Figure 1950MHz 3.9 4.9 dB Device Operating Voltage (VCC) RDC=20Ω, VS=+5.0V 4.2 4.3 V Device Operating Current (ICC) RDC=20Ω, VS=+5.0V 38 42 46 mA Thermal Resistance, θjc Junction to case 80 °C/W Notes: 1. Test conditions unless otherwise noted: VS= +5.0V, VCC = +4.2 V, ICC = 42mA, RDC=20Ω, Temp= +25 °C , 50 Ω system. 2. Supply voltage (VS) and bias resistor (RDC) values are related by: RDC=(VS-VCC)/ICC

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 3 of 9 www.qorvo.com Evaluation Board Bill of Material Reference Des. Value Description Manuf. Part Number n/a n/a Printed Circuit Board Qorvo Q1 n/a HBT Gain Block Amplifier Qorvo SBB3089Z C1, C4 1000 pF CAP, 0603, 10%, 50V, X7R various C2 68 pF CAP, 0603, 5%, 50V, C0G various C3 0.1 uF CAP, 0805, 10%, 50V, X7R various L1 48 nH IND, 0805, 5%, W/W Coilcraft 0805HQ-48NXJRC RDC 20 Ω RES, 0805, 5%, 1/10W various Recommended RDC Resistor Values for ICC=42mA Supply Voltage (VS) 5V 6V 8V 10V 12V RDC 20Ω 43Ω 91Ω 139Ω 187Ω Notes: 1. Supply voltage (VS) and bias resistor (RDC) values are related by: RDC=(VS-VCC)/ICC

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 4 of 9 www.qorvo.com Typical Performance – with Bias Tee Test conditions unless otherwise noted: VS= +5.0V, VCC = +4.2 V, ICC = 42mA, RDC=20Ω, Temp= +25 °C , 50 Ω system. Parameter Typical Value Units Frequency 100 500 850 1950 2140 2400 3500 MHz Input Return Loss 24 26.5 24.5 21 20.5 20 15.5 dB Output Return Loss 21.5 26 26 25.5 25.5 27.5 21 dB Notes: 1. Pout = -5 dBm/tone, ∆f = 1 MHz Performance Plots – with Bias Tee Test conditions unless otherwise noted: VS= +5.0V, VCC = +4.2 V, ICC = 42mA, RDC=20Ω, Temp= +25 °C , 50 Ω system.

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 5 of 9 www.qorvo.com Pin Configuration and Description Pin No. Label Description 1 RF IN RF input. External DC Block capacitor required. 2, 4 GND RF/DC ground. Use recommended via hole pattern to minimize inductance and thermal resistance. See PCB Mounting Pattern for suggested footprint. 3 RF OUT / BIAS RF output and DC Supply input. External DC Block capacitor and bias voltage required.

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 6 of 9 www.qorvo.com Package Marking and Dimensions Marking: Part Identifier – SBB3089Z Trace Code – Assigned by sub-contractor Notes: 1. All dimensions are in millimeters. Angles are in degrees. 2. The terminal #1 identifier and terminal numbering conform to JESD 95-1 SPP-012. PCB Mounting Pattern NOTES: 1. All dimensions are in millimeters [inches]. Angles are in degrees. 2. Use 1 oz. copper minimum for top and bottom layer metal. 3. Vias are required under the backside paddle of this device for proper RF/DC grounding and thermal dissipation. We 4. Ensure good package backside paddle solder attach for reliable operation and best electrical performance. SBB3089Z Trace Code

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 7 of 9 www.qorvo.com Tape and Reel Information – Carrier and Cover Tape Dimensions Feature Measure Symbol Size (in) Size (mm) Cavity Length A0 0.181 4.60 Width B0 0.193 4.90 Depth K0 0.075 1.90 Pitch P1 0.315 8.00 Centerline Distance Cavity to Perforation - Length Direction P2 0.079 2.00 Cavity to Perforation - Width Direction F 0.217 5.50 Cover Tape Width C 0.362 9.20 Carrier Tape Width W 0.472 12.0

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 8 of 9 www.qorvo.com Tape and Reel Information – Reel Dimensions Standard T/R size = 1,000 pieces on a 7” reel. Feature Measure Symbol Size (in) Size (mm) Flange Diameter A 6.969 177.0 Thickness W2 0.717 18.2 Space Between Flange W1 0.504 12.8 Hub Outer Diameter N 2.283 58.0 Arbor Hole Diameter C 0.512 13.0 Key Slit Width B 0.079 2.0 Key Slit Diameter D 0.787 20.0 Tape and Reel Information – Tape Length and Label Placement Notes: 1. Empty part cavities at the trailing and leading ends are sealed with cover tape. See EIA 481-1-A. 2. Labels are placed on the flange opposite the sprockets in the carrier tape.

50MHz to 6000MHz Gain Block Data Sheet, June 8, 2021 | Subject to change without notice 9 of 9 www.qorvo.com Solderability Solder profiles available upon request. Contact plating: NiPdAu RoHS Compliance This part is compliant with 2011/65/EU RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electr ical and Electronic Equipment) as amended by Directive 2015/863/EU. This product also has the following attributes:

  • Lead Free
  • Halogen Free (Chlorine, Bromine)
  • Antimony Free
  • TBBP-A (C15H12Br402) Free
  • PFOS Free
  • SVHC Free Handling Precautions Parameter Rating Standard Caution! ESD-Sensitive Device ESD – Human Body Model (HBM) Class 1C ESDA / JEDEC JESDC22-A114 MSL – Moisture Sensitivity Level Level 3 IPC/JEDEC J-STD-020 Contact Information For the latest specifications, additional product information, worldwide sales and distribution locations: Web: www.qorvo.com Tel: 1-844-890-8163 Email: customer.support@qorvo.com Important Notice The information contained herein is believed to be reliable; however, Qorvo makes no warranties regarding the information con tained herein and assumes no responsibility or liability whatsoever for the use of the information contained herein. All informatio n contained herein is subject to change without notice. Customers should obtain and verify the latest relevant information before placing orders for Qorvo products. The information contained herein or any use of such information does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other intellectual property rights, whether with regard to such information itself or anythin g described by such information. THIS INFORMATION DOES NOT CONSTITUTE A WARRANTY WITH RESPECT TO THE PRODUCTS DESCRIBED HEREIN, AND QORVO HEREBY DISCLAIMS ANY AND ALL WARRANTIES WITH RESPECT TO SUCH PRODUCTS WHETHER EXPRESS OR IMPLIED BY LAW, COURSE OF DEALING, COURSE OF PERFORMANCE, USAGE OF TRADE OR OTHERWISE, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Without limiting the generality of the foregoing, Qorvo products are not warranted or authorized for use as critical components in medical, life-saving, or life-sustaining applications, or other applications where a failure would reasonably be expected to cause severe personal injury or death. Copyright 2021 © Qorvo, Inc. | Qorvo is a registered trademark of Qorvo, Inc. Pb