SB3318E-G AUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Colorless transparency lens type
  • φ3mm(T-1) all plastic mold type
  • Super luminosity
  • E ; ESD Protected (±2.0KV, 3 Times @100pF, 1.5KΩ) O u t l i n e D i m e n s i o n s u n i t : mm S T R A I G H T T Y P E STOPPER TYPE : (B) PIN Connections 1. Anode 2. Cathode SSeemmiiccoonndduuccttoorr

SB3318E-G / SB3318E-G(B) Absolute Maximum Ratings ( T a = 2 5 oC) Characteristic Symbol Rating Unit Power dissipation P D 75 mW Forward current I F 20 mA *1Peak forward current I FP 50 mA Reverse voltage V R 4 V Operating temperature range T opr -25∼85 ℃ Storage temperature range T stg -30∼100 ℃ Soldering temperature T sol 260℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Recommend document※ -. LED is very sensitive to ESD . Electrical / Optical Characteristics (Ta=25oC) Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward Voltage V F I F= 20mA 2.9 - 3.8 V *2Luminous Intensity IV IF= 20mA 100 - 350 mcd *3Dominant Wavelength λD IF= 20mA 460 - 475 nm Spectrum Bandwidth ∆λ IF= 20mA - 26 - nm Reverse Current IR VR=4V - - 10 uA *4Half angle θ1/2 IF= 20mA - ±45 - deg *2. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% *3. Dominant Wavelength Maximum tolerance for each Grade Classification limit is ±1nm *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity

  • VF / IV / λD Grade Classification (Ta=25℃) Test Condition @IF = 20mA Forward Voltage [V] Luminous Intensity [mcd] Dominant eavelength [nm] 1 : 2.9~3.2 L : 100~155 a : 460~465 2 : 3.2~3.5 M : 155~230 b : 465~470 3 : 3.5~3.8 N : 230~350 c : 470~475 (Do not use to combine grade classification. It must be used separately grade classification)

SB3318E-G / SB3318E-G(B) Characteristic Diagrams Fig. 1 I F - VF Fig. 2 IV - IF Forward Current I F [mA] Relative Intensity [%] Forward Voltage V F [V] Forward Current I F [mA] Forward Current I F [mA] Luminous Intensity Iv [mcd] Fig. 5 Radiation Diagram Relative Luminous Intensity Iv [%] Ambient Temperature Ta [℃] Wavelength λ [nm] Fig. 3 IF – Ta Fig.4 Spectrum Distribution IF=20mA

SB3318E-G / SB3318E-G(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and co mmunication equipment, m easuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equi pments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.