SB101 TSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

/cuspopen UL Recognized File # E-96005 /cuspopen Surge overload rating 200 amperes peak /cuspopen Low forward voltage drop /cuspopen High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension /cuspopen Small size, simple installation /cuspopen Leads solderable per MIL-STD-202 Method 208 SB-10 Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol SB 101 SB 102 SB 103 SB 104 SB 105 SB 106 SB 107 Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TA = 50℃ I(AV) 10 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 300 A Maximum Instantaneous Forward Voltage @ 5.0A VF 1.1 V Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=100℃ IR 10 500 uA uA Typical Thermal Resistance (Note) RθJC 5 ℃/W Operating Temperature Range TJ -55 to +125 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Note: Thermal Resistance from Junction to Case per Leg.

FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT PEAK FOR WARD SURGE CURRENT . (A) 102 51 5020 100 150 100 200 250 300 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method TJ=25 C0 - 687 - RATINGS AND CHARACTERISTIC CURVES (SB101 THRU SB107) FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 0 20 40 60 80 100 120 140 0.01 0.1 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=100 C0 TJ=25 C0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 50 100 150 AMBIENT TEMPERATURE. ( C) o FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 0.01 100 INSTANTANEOUS FORWARD VOLTAGE. (V) Tj=25 C PULSE WIDTH-300 S 1% DUTY CYCLE

0 INSTANTANEOUS REVERSE CURRENT

.( A )