SB0540L_V01 CHENDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Patented Super Barrier Rectifier Technology High Forward Surge Capability Ultra Fow Power Loss,High Efficiency Excellent High temperature Stability P lastic material-UL flammability 94V-0 Case : JEDEC TO-277 Molded plastic body Terminals :Plated Leads Solderable per MIL-STD-202,Method 208 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.003 ounce, 0.092 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS SB 0540L SB 0545L SB 0550L SB 0560L SB 0580L SB 05100L SB 05150L SB 05200L UNIT Marking Code MDD SB 0540L MDD SB 0545L MDD SB 0550L MDD SB 0560L MDD SB 0580L MDD SB 05100L MDD SB 05150L MDD SB 05200L Maximum repetitive peak reverse voltage V RRM 40 45 50 60 80 100 150 200 VMaximum working peak reverse voltage VRWM Maximum DC blocking voltage VDC RMS Reverse voltage VRMS 28 32 35 42 56 70 105 140 V Average Rectified Output Current I(O) 5.0 Non-Repetitive Peak Forward Surge8.3ms Single Half Sine-Wave Superimposed on rated load(JEDEC Method) IFSM 120 A TA=25℃Peak reverse curent at rated DC blocking voltage TA=125℃ IR 0.3 0.05 5 mA Typical thermal resistance RθJA 80.0 ℃/W Operating junction and storage temperature range TJ,TSTG -55 to +150 ℃ 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.The typical data above is for referenceonly. Dimensions in inches and (millimeters) TO-277

Rev:2019A0 Page :2 Ratings And Characteristic Curves https://www.microdiode.com Reverse Voltage - 40 to 200 Volts Forward Current -5.0 Ampere SB0540L THRU SB05200L The curve above is for reference only. AT =25 AT =100 Fig3: Surge Forward Current Capadility Fig2 : Instantaneous Forward Voltage 240 200 160 120 Fig.1 - Forward Current Derating CurveAverage Forward Current,I (A)F(AV) 0 0 25 50 75 5 100 125 150 0 175 Ambient Temperature,T ( O C)A single phase half wave 60Hz resistive or inductive load Fig4: Typical Reverse Characteristics IFSM(A) 2 10 20 100 Number of Cycles 0 20 40 60 80 100 0.01 0.1 1.0 100 VRM(%) IRRM(mA) 0.4 0.6 0.8 1.0 VF(V) IF(A) 0.1 0 0.2 5.0 SB0540L-SB0545L SB0550L-SB0560L SB0580L-SB05100L AT =25℃ SB05150L SB05200L

https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing Reverse Voltage - 40 to 200 Volts Forward Current -5.0 Ampere SB0540L THRU SB05200L 0.073 0.169 Symbol Unit (mm) A C1 .50 D 0.211 4.30 1.85 E B Unit (inch) 0.059 5.35 0.1423.60 Item Tolerance TO-277 Carrier width Carrier length Carrier depth Sprocket hole 11" Reel outside diameter 11" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Reel width W1 Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1.55 280.00 50.0 13.00 1.75 7.50 8.00 4.00 2.00 0.25 12.00 12.30 4.45 7.0 1.60 TO-277 11" 3,000 5.0 6,000 280 48,000 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) 340*340*43 380*380*380 9.0