DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
for Band38_Band40 / 2in2out Balanced / HL /1511 Murata PN: SAWFD2G35BJ0F0A Feature Output Diplex Type Dual SAW Note : Murata SAW Component is applicable for Cellul ar /Cordless phone (Terminal) relevant market only. Please also read caution at the end of this document.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Date Feb-27-2013 Aug-22-2013 Aug-05-2016 Mar-27-2017 Feb-14-2020 SAWFD2G35BJ0F0A_rev. C ■ Updated General Informatio n / MP SAWFD2G35BJ0F0A_rev. D ■ Updated General Informatio n SAWFD2G35BJ0F0A_rev. E ■ Updated General Informatio n Revision No. Description SAWFD2G35BJ0F0A_rev. A ■ Initial Release SAWFD2G35BJ0F0A_rev. B ■ Updated SPEC - Operating temperature - Storage temperature - Input Power - D.C. Volatage between the terminals - Minimum Resistance between the terminals - RoHS compliance - ESD (ElectroStatic Discharge) sensitive device : -30 to +85 deg.C : 10M ohm : 3V (25+/-2 deg.C) : Yes : +13 dBm 2000 h : -40 to +85 deg.C
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Package Dimensions & Recommended Land Pattern unit: mm Dimensions Marking : Laser Printing * : Month code(Refer to the table A) $ : Date code(Refer to the table B) 1 : Z 2 : 5 Terminal Number (4) : Unbalanced port-Lch (6)(9) : Balanced port-Lch (1) : Unbalanced port-Hch (6)(9) : Balanced port-Hch Others : GND Notice) Please refer to Measurement Circuit for Port information in detail. Land Pattern Measurement Circuit (Top Thru View) (Hch) (Lch) R1 : 50 ohm L1 :7.5nH(Ideal inductor) R2 : 100 ohm L3 :5nH(Ideal inductor) R3 : 50 ohm R4 : 50 ohm L2 :7.5nH(Ideal inductor) R5 : 100 ohm L3 :5nH(Ideal inductor) R6 : 50 ohm
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Electrical Characteristic < Low Freq. Filter > min. typ. max. Center Frequency 2350 MHz Insertion Loss 2300. to 2400. MHz 3.2 4.7 dB Ripple Deviation 2300. to 2400. MHz 1.1 3.0 dB VSWR 2300. to 2400. MHz 2.0 2.9 Phase Balance 2300. to 2400. MHz 158 197 202 deg. Absolute Attenuation 10. to 2215. MHz 18 28 dB 880. to 915. MHz 50 60 dB 1710. to 1785. MHz 37 52 dB 1880. to 1920. MHz 38 48 dB 2010. to 2025. MHz 37 47 dB 2215. to 2240. MHz 10 23 dB 2420. to 2430. MHz 3.5 9 dB 2430. to 2472. MHz 6.0 30.0 dB 2430. to 2472. MHz 12 30 dB +23 to +27deg.C 2472. to 2483. MHz 20 30 dB 2483. to 2500. MHz 20 30 dB 2500. to 3000. MHz 22 32 dB 3000. to 6000. MHz 24 34 dB * Typical value at 25±2deg.C ( -30 to +85 deg.C ) Low Freq. Filter Characteristics Unit Note
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Electrical Characteristic < High Freq. Filter > min. typ. max. Center Frequency 2595 MHz Insertion Loss 2570. to 2620. MHz 3.2 3.8 dB Ripple Deviation 2570. to 2620. MHz 0.8 2.0 dB VSWR 2570. to 2620. MHz 1.4 2.2 Phase Balance 2570. to 2620. MHz 164 193 196 deg. Absolute Attenuation 0.1 to 2400. MHz 21 38 dB 880. to 915. MHz 50 66 dB 1710. to 1785. MHz 37 47 dB 1880. to 1920. MHz 33 44 dB 2010. to 2025. MHz 21 42 dB 2400. to 2500. MHz 22 32 dB 2500. to 2562. MHz 3.0 3.9 dB 2700. to 3000. MHz 17 27 dB 3000. to 6000. MHz 25 35 dB * Typical value at 25±2deg.C ( -30 to +85 deg.C ) High Freq. Filter Characteristics Unit Note
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Electrical Characteristic < Low Freq. Filter >
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Electrical Characteristic < High Freq. Filter >
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.3 B: 1.75 K: 1.7 C: 3.50 L: 0.60 D: 4.0 E: 2.00 F: 4.0 G: φ1.5 H: 0.90 Tape Reel SAWFD2G35BJ0F0AR00… 10000pcs (φ330) SAWFD2G35BJ0F0AR1S… Sample Order (φ178/330) φ178Reel φ330Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 8/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Marking Code Table A: Month Code Table B: Date Code date 1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th code A B C D E F G H J K date 11th 12th 13th 14th 15th 16th 17th 18th 19th 20th code L M N P Q R S T U V date 21st 22nd 23rd 24th 25th 26th 27th 28th 29th 30th 31st code W X Y Z a b c d e f g Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product when our product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the products is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The product shall not be used in any application listed below which requires especially high reliability for the prevention of such defect as may directly cause damage to the third party's life, body or property. You acknowledge and agree that, if you use our products in such applications, we will not be responsible for any failure to meet such requirements. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN SUCH APPLICATIONS.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 9/9 SAWFD2G35BJ0F0A ( Band38_Band40 / 2in2out Balanced / HL / 1511 ) Important Notice (2/2) - Aircraft equipment. - Aerospace equipment - Undersea equipment. - Power plant control equipment - Medical equipment. - Transportation equipment (vehicles, trains, ships, elevator, etc.). - Traffic signal equipment. - Disaster prevention / crime prevention equipment. - Burning / explosion control equipment - Application of similar complexity and/ or reliability requirements to the applications listed in the above. We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. Please do not use the product in molding condition. This product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). The product shall not be used in any other application/model than that of claimed to Murata. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by ・ the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the product to be sold by you, ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales.