SAWFD1G96AC2F0A

SAWFD1G96AC2F0A MURATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 10

Technical content

for Band25_Band66 / 1in2out Unbalanced / LH /1511 Murata PN: SAWFD1G96AC2F0A  Feature  For Band25+Band66 CA  High Attenuation  Low Insertion Loss Note : This Murata SAW Component is Consumer grade product and applicable for Cellular phone or similar end devices. Please also read Important Notice at the end of this document. Revision G

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) General Information - Operating temperature - Storage temperature - Input Power - D.C. Volatage between the terminals - Minimum Resistance between the terminals : 10M ohm - RoHS compliance : Yes - ESD (ElectroStatic Discharge) sensitive device : +13 dBm 2000 h : -40 to +85 deg.C : -20 to +85 deg.C : 3V (25+/-2 deg.C)

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Package Dimensions & Recommended Land Pattern unit: mm Dimensions Marking : Laser Printing * : Month code $ : Date code 1 : 7 2 : V Terminal Number (1) : Unbalanced port-Lch/Hch (9) : Unbalanced port-Lch (6) : Unbalanced port-Hch Others : GND Notice) Please refer to Measurement Circuit for Port information in detail. Land Pattern Measurement Circuit (Top Thru View) (Lch) (Hch) R1 : 50 ohm L1 :2.7nH(Ideal inductor) R2 : 50 ohm L2 :10nH(Ideal inductor) R3 : 50 ohm L3 :4.3nH(Ideal inductor)

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Electrical Characteristic < Low Freq. Filter > min. typ.* max. Center Frequency 1962.5 MHz Insertion Loss 1930. to 1995. MHz 2.2 4.0 dB B25 1930.25 to 1994.75 MHz 2.2 3.8 dB B25 1930. to 1990. MHz 2.2 4.0 dB B2 1930.25 to 1989.75 MHz 2.2 3.8 dB B2 Ripple Deviation 1930. to 1995. MHz 0.9 2.9 dB B25 1930. to 1990. MHz 0.9 2.9 dB B2 VSWR 1930. to 1995. MHz 1.6 3.0 B25 1930. to 1990. MHz 1.5 3.0 B2 Absolute Attenuation 1. to 699. MHz 47 54 dB 80. MHz 70 109 dB RX - TX 699. to 716. MHz 47 53 dB B12 TX 814. to 849. MHz 43 49 dB B26 TX 1710. to 1755. MHz 31 37 dB B4 TX 1710. to 1780. MHz 31 37 dB B66 TX 1712.5 to 1777.5 MHz 31 37 dB INT Any 4.5MHz, B66 TX 1770. to 1835. MHz 37 40 dB 2TX - RX 1850. to 1915. MHz 30 41 dB B25 TX 1852.5 to 1912.5 MHz 31 41 dB INT Any 4.5MHz, B25 TX 1850. to 1910. MHz 37 41 dB B2 TX 1852.5 to 1907.5 MHz 37 41 dB INT Any 4.5MHz, B2 TX 2400. to 2500. MHz 33 39 dB ISM2.4 3860. to 3990. MHz 36 41 dB 2f 4900. to 5950. MHz 28 34 dB ISM 5G 5790. to 5985. MHz 28 34 dB 3f 7720. to 7980. MHz 23 31 dB 4f 9650. to 9975. MHz 21 30 dB 5f 11580. to 11970. MHz 18 29 dB 6f * Typical value at 25±2deg.C ( -20 to +85 deg.C ) Low Freq. Filter Characteristics Unit Note

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Electrical Characteristic < High Freq. Filter > min. typ.* max. Center Frequency 2155 MHz Insertion Loss 2110. to 2200. MHz 2.8 3.6 dB B66 2110.25 to 2199.75 MHz 2.7 3.6 dB B66 2110. to 2170. MHz 2.5 2.9 dB B1 2110.25 to 2169.75 MHz 2.5 2.9 dB B1 Ripple Deviation 2110. to 2200. MHz 1.2 2.3 dB B66 2110. to 2170. MHz 0.9 1.6 dB B1 VSWR 2110. to 2200. MHz 1.7 2.2 B66 2110. to 2170. MHz 1.7 2.2 B1 Absolute Attenuation 10. to 699. MHz 54 65 dB 190. MHz 54 97 dB RX -TX (B1) 420. MHz 54 78 dB RX -TX (B66) 699. to 716. MHz 54 64 dB B12 TX 777. to 787. MHz 54 61 dB B13 TX 814. to 849. MHz 54 59 dB B26 TX 880. to 915. MHz 52 57 dB B8 TX 1710. to 1780. MHz 40 43 dB B66 TX 1712.5 to 1777.5 MHz 40 43 dB INT Any 4.5MHz, B66 TX 1310. to 1360. MHz 41 47 dB 2TX- RX (B66) 1730. to 1790. MHz 37 43 dB 2TX- RX (B1) 1850. to 1915. MHz 42 48 dB B25 TX 1852.5 to 1912.5 MHz 42 48 dB INT Any 4.5MHz, B25 TX 1850. to 1910. MHz 42 48 dB B2 TX 1852.5 to 1907.5 MHz 42 48 dB INT Any 4.5MHz, B2 TX 1920. to 1980. MHz 38 41 dB B1 TX 1922.5 to 1977.5 MHz 38 41 dB INT Any 4.5MHz, B1 TX 1910. to 1990. MHz 38 41 dB (RX + TX)/2 (B66) 2015. to 2090. MHz 5.0 16.0 dB (RX + TX)/2 (B1) 2400. to 2500. MHz 40 46 dB ISM2.4 3820. to 3980. MHz 35 40 dB RX + TX (B66) 4030. to 4150. MHz 34 39 dB RX + TX (B1) 4220. to 4400. MHz 33 38 dB 2f 4900. to 5950. MHz 29 34 dB ISM 5G 5530. to 5760. MHz 29 35 dB RX +2TX (B66) 5950. to 6130. MHz 25 34 dB RX +2TX (B1) 6330. to 6600. MHz 24 34 dB 3f 8440. to 8800. MHz 22 32 dB 4f 10550. to 11000. MHz 18 28 dB 5f 12660. to 13200. MHz 7.0 18.0 dB 6f * Typical value at 25±2deg.C ( -20 to +85 deg.C ) High Freq. Filter Characteristics Unit Note

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Electrical Characteristic < Low Freq. Filter > 1760 1800 1840 1880 1920 1960 2000 2040 2080 2120 2160 I.L.[dB] Frequency[MHz] 0 1000 2000 3000 4000 5000 6000 7000 8000 I.L.[dB] Frequency[MHz]

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Electrical Characteristic < High Freq. Filter > 1910 1950 1990 2030 2070 2110 2150 2190 2230 2270 2310 2350 239 0 I.L.[dB] Frequency[MHz] 0 1000 2000 3000 4000 5000 6000 7000 8000 I.L.[dB] Frequency[MHz]

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.3 B: 1.75 K: 1.7 C: 3.50 L: 0.60 D: 4.0 E: 2.00 F: 4.0 G: φ1.5 H: 0.90 Tape Reel SAWFD1G96AC2F0AR00… 10000pcs (φ330) SAWFD1G96AC2F0AR1S… Sample O rder (φ178/330) φ178Reel φ330Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 8/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product specified in the front page of this product specifications (the "Product" or "Products") when our Product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our Product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our Product deviating from the condition and the environment specified in this specification. Please note that the only warranty that we provide regarding the Product is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such Products, which are caused under the conditions other than those specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The Product shall not be used for any application which requires especially high reliability or accuracy in order to prevent defect which incurs high possibility of damage to the third party's life, body or property such as the applications listed below as item (a) to (j) (the “Prohibited Application”). You acknowledge and agree that, if you use our Products in the Prohibited Applications, we will not be responsible for any damage caused by such use. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN THE PROHIBITED APPLICATIONS. (a) Aircraft equipment. (b) Aerospace equipment (c) Undersea equipment. (d) Power plant control equipment (e) Medical equipment. (f) Transportation equipment (vehicles, automotive, trains, ships, etc.). (g)Traffic signal equipment. (h)Disaster prevention / crime prevention equipment. (i) Burning / explosion control equipment (j) Application of similar complexity and/ or reliability requirements to the applications listed in the above. For the avoidance of doubt, the Product is not automotive grade, and will not support such requests for automotive as below, also not support other specific requests for automotive. - AEC-Q200 - PPAP - IATF16949,VDA6.3 - Zero Defect program - Long product life cycle - Automotive 8D failure analysis and report

All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 9/9 SAWFD1G96AC2F0A ( Band25_Band66 / 1in2out Unbalanced / LH / 1511 ) Important Notice (2/2) We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our product. Our product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. Please do not use the Product in molding condition. This product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our Products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our Products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). The Product shall not be used in any other application/model than that of claimed to Murata. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. In particular we disclaim liability for damages caused by ・ the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the Product to be sold by you, ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you can’t agree the above contents, you should inquire our sales.