SAPPHIRE-LP

SAPPHIRE-LP COHERENT | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 6

Technical content

• W avelength versatility - 458 nm t o 594 nm
• Br oad spectrum of output power - 10 mW up t o 300 mW
• Outstanding power stability and low noise
• Superior beam quality
• F lexible interface concept - A nalog, RS-232 & USB
• P ermAlign technology - P ermanent optimal alignment - Unsurpassed r obust and stable
• Pr oven reliability - Mor e than 50,000 installations
• OEM and end-user v ersions

Applications

• F low Cytometry
• Confocal Micr oscopy
• Genomics & Pr oteomics
• H igh Throughput Drug Screening
• Medical Diagnostics
• Micr o Array Scanning
• Semiconduct or Inspection
• Metrology Sapphire LP is a series of compact CW visible lasers based on Coherent’s unique OPSL (Optically Pumped Semiconductor Laser) technology. OPSL technology not only provides estab- lished legacy wavelengths of ion and diode-pumped solid-state lasers, but their scalability also allows for customized wave- lengths to be developed and tailored to a specific application. Sapphire LP lasers are manufactured in cleanrooms using Coherent’s patented PermAlign™ technology for optimal align- ing and solderbonding the optics. This patented technology results in the best beam quality and power stability as well as the lowest noise over the complete lifetime of the laser. Sapphire LP lasers come with a flexible interface concept: Analog, RS-232 or USB – it is up the user to select the appro- priate communication channel. Sapphire LP lasers feature superior performance, proven reliability and low cost of ownership making them the ideal laser solution for a variety of applications e.g. in life sciences, environmental protection, semiconductor inspection, and metrology. Sapphire LP CW Visible Lasers from Deep Blue to Orange

Sapphire LP CW Visible Lasers from Deep Blue to Orange Sapphire 458 LP Sapphire 488 LP Wavelength1 (nm) 458 ±2 488 ±2 Output Power2 (mW) 20, 50, 75 10, 20, 30, 50, 75, 100, 150, 200, 300 Spatial Mode TEM00, M² <1.1 Beam Asymmetry 0.9 to 1.1 Beam Diameter at 1/e2 0.70 ±0.05 mm Beam Divergence (mrad) <1.2 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 Noise (%)

20 Hz to 2 MHz, rms

20 Hz to 20 kHz, peak-to-peak

<0.25 Long-Term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances3 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±200 UTILITY AND ENVIRONMENTAL REQUIREMENTS Operating Voltage5 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) 25 (baseplate at 55°C/50°C) 7 Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2 m (6.56 ft.), optional 5 m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-t o-laser tolerance. With residual IR emission less than 0.1 mW. 2 Output power is adjustable via analog or digital inter face from 10% to 110%. Specifications are valid for 100% power. Recommend ed power range is 70 to 110% power. 3 Static alignment t olerances are relative to the right bottom edge (in beam direction). 4 200 mm is ~ 30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm. 5 If user-supplied, the DC power supply has t o meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With fact ory-provided or other adequate heat sink. 7 Sapphir e 488-10/20/25/30 has a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW models are limited to a maximum baseplate temperature of +50°C ( +122°F).

Sapphire LP CW Visible Lasers from Deep Blue to Orange Sapphire 514 LP Sapphire 532 LP Sapphire 552 LP Wavelength1 (nm) 514 ±2 532 ±2 552 ±2 Output Power2 (mW) 20, 50, 100, 150 20, 50, 100, 150, 200, 300 50, 100, 200 Spatial Mode TEM00, M² <1.1 Beam Asymmetry 0.9 to 1.1 Beam Diameter at 1/e2 0.70 ±0.05 mm Beam Divergence (mrad) <1.3 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 Noise (%) <0.25 Long-Term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances3 Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±200 UTILITY AND ENVIRONMENTAL REQUIREMENTS Operating Voltage5 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2 m (6.56 ft.), optional 5 m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-t o-laser tolerance. With residual IR emission less than 0.1 mW. 2 Output power is adjustable via analog or digital inter face from 10% to 110%. Specifications are valid for 100% power. Recommend ed power range is 70 to 110% power. 3 Static alignment t olerances are relative to the right bottom edge (in beam direction). 4 200 mm is ~ 30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm. 5 If user-supplied, the DC power supply has t o meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With fact ory-provided or other adequate heat sink.

Sapphire LP CW Visible Lasers from Deep Blue to Orange Sapphire 561 LP Sapphire 568 LP Sapphire 588 LP Sapphire 594 LP Wavelength1 (nm) 561 ±2 568 ±2 588 ±2 594 ±2 Output Power2 (mW) 20, 50, 75, 100, 150, 200, 300 50, 100, 150, 200 20, 100 75 Spatial Mode TEM00, M² <1.1 Beam Asymmetry 0.9 to 1.1 Beam Diameter at 1/e2 0.70 ±0.05 mm Beam Divergence (mrad) <1.3 Pointing Stability (µrad) (over 2 hours after warm-up and ±3°C) <30 Noise (%) <0.25 Long-Term Power Stability (%) (2 hours, ±3°C) <2 Warm-up Time (minutes) <5 Polarization Ratio >100:1, vertical Static Alignment Tolerances Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25 ±2.5 ±200 UTILITY AND ENVIRONMENTAL REQUIREMENTS Operating Voltage5 (VDC) Maximum Rated Nominal +10.8 to 15.0 +12.0 to 13.2 Power Consumption (W) <60 Max. Laser Head Baseplate Temperature 6 +50°C (122°F) Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C) Ambient Temperature Operating Condition Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing -30 to 60°C (-22 to 140°F) Shock Tolerance (6 ms) 7 g laterally, 15 g vertically Dimensions (L x W x H) Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.) 200 x 80 x 50 mm (7.9 x 3.2 x 2 in.) 171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.) 2 m (6.56 ft.), optional 5 m (16.4 ft.) Weights Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.) 0.25 kg (0.55 lbs.) 0.75 kg (1.65 lbs.) 0.95 kg (incl. line cable) (2.1 lbs.) 1.7 kg (3.7 lbs.) 0.3 kg (0.66 lbs.) 1 Laser-t o-laser tolerance. With residual IR emission less than 0.1 mW. 2 Output power is adjustable via analog or digital inter face from 10% to 110%. Specifications are valid for 100% power. Recommend ed power range is 70 to 110% power. 3 Static alignment t olerances are relative to the right bottom edge (in beam direction). 4 200 mm is ~ 30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm. 5 If user-supplied, the DC power supply has t o meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%. 6 With fact ory-provided or other adequate heat sink.

Sapphire LP CW Visible Lasers from Deep Blue to Orange MEASUREMENT TOOLS Part Number Meter FieldMax™II-TO 1098579 Sensor PS10Q 1098400 MECHANICAL SPECIFICATIONS Controller 6.1 mm (0.24 in.) 20.4 mm (0.8 in.) 11 mm (0.43 in.) 16.7 mm (0.66 in.) 0 mm (0.0 in.) 5.1 mm (0.2 in.) 21.1 mm (0.8 in.) 35.3 mm (1.4 in.) 62.6 mm (2.5 in.) 102.9 mm (4.0 in.) 112.4 mm (4.4 in.) 117.8 mm (4.6 in.) 8.3 mm (0.327 in.) 66 mm (2.6 in.) 76.2 mm (3.0 in.) 8.8 mm (0.345 in.) 6.35 mm (0.25 in.) app. 35 mm (1.38 in.) max. 6.1 mm (0.24 in.) 6 spacers with tapped thread M4, UNC #8 or 5/32 BSW are attached USB-Interface Mini USB-Type B 5 pol Serial Interface DSub-9 (female) Analog Interface 26 pin-headertype AMP latch Tyco 281275-1 Laser Head DSub-25 (female) Fuse TE5 5A 127V Littlefuse 3961500000 DC Power Connector Molex Micro Fit 3.0 10 positions Top View Side View

Coherent, Inc.,

5100 Patrick Henry Drive Santa Clara, CA 95054

p. (800) 527-3786 | (408) 764-4983 f. (408) 764-4646 tech.sales@coherent.com www.coherent.com MECHANICAL SPECIFICATIONS Sapphire LP Sapphire LP CW Visible Lasers from Deep Blue to Orange 15 mm (0.6 in.) 17.9 mm (0.7 in.) 17.5 mm (0.69 in.) 5 mm (0.2 in.) 10 mm (0.4 in.) 110 mm (4.3 in.) 115.6 mm (4.5 in.) 120 mm (4.7 in.) 125 mm (4.9 in.) 7.5 mm (0.3 in.) 19 mm (0.75 in.) 34 mm (1.3 in.) Beam Exit 6 mm (0.24 in.) 70 mm (2.75 in.) 55 mm (2.2 in.) 45 mm (1.8 in.) Position of Dowel Pins (Beam Registering) LED (Emission Indicator) Connection to Controller (25pin SUB-D male) DC Supply for Fan (AMP-MODU-2pin-male) Interfacing Part (Heatsink) should have flatness <0.05 mm (0.002 in.) Beam Waist at Exit Window [3 mm (0.12 in.) inside from here] 4 Holes Ø4.0 mm (0.16 in.) for Screws M3, UNC/UNF No.5&6, 1/8-40 BSW/BSF or BA No.4&5 Rear View Side View Front View Top View Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976. Coherent offers a limited warranty for all Sapphire Lasers. For full details of this warranty coverage, please refer to the Service section at www.coherent.com or contact your local Sales or Service Representative. MC-027-10-0M0722Rev.M Copyright ©2022 Coherent, Inc. VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.58 to 0.60 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.55 to 0.58 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.54 to 0.57 µm 0.79 to 0.82 µm 1.10 to 1.20 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.50 to 0.55 µm 0.79 to 0.82 µm 1.00 to 1.10 µm Max. Power 480 mW 20 mW 50 mW VISIBLE A ND INVISIBLE LASER RADIATION. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION. CLASS IIIb LASER PRODUCT . λ 0.45 to 0.50 µm 0.79 to 0.82 µm 0.90 to 1.00 µm Max. Power 480 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADI AT I ON. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADI AT I ON. CLASS IIIb LASER PRODUCT . λ 0.45 to 0.50 µm 0.79 to 0.82 µm 0.90 to 1.00 µm Max. Power 350 mW 20 mW 50 mW VISIBLE AND INVISIBLE LASER RADI AT I ON. AV OID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADI AT I ON. CLASS IIIb LASER PRODUCT . λ 0.45 to 0.50 µm 0.79 to 0.82 µm 0.90 to 1.00 µm Max. Power 150 mW 20 mW 50 mW