SAPAE1G74BA0C0A | DigiCamel IC Datasheet

Online Datasheet

Read SAPAE1G74BA0C0A online.

SAPAE1G74BA0C0A MURATA | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 18

Technical content

■ Feature Revision D Note : This Murata SAW Component is Consumer grade product and applicable for Cellular phone or similar end devices. Please also read Important Notice at the end of this document. Datasheet of SAW Device Easy to Swap from 2016 Size B1+3 QPX Non-CA, B1, B3 SAW Dual Duplexer Murata PN : SAPAE1G74BA0C0A for Band1_Band3 / Unbalanced / 7pin /2016

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) General Information - Operating temperature : - Storage temperature : - Input Power - D.C. Voltage between the terminals : - Minimum Resistance between the terminals : - RoHS compliance : - ESD (ElectroStatic Discharge) sensitive device The input power shall be applied to Tx-port within own Tx passband frequency range. Yes -20 to +85deg.C -40 to +85deg.C 3V (25+/-2 deg.C) 1M ohm +31.0dBm 5000h +50deg.C (1) +29.5dBm 5000h +50deg.C (2) (1) applicable for W-CDMA, LTE, NR(DFT-s-OFDM) (2) applicable for NR(CP-OFDM) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Dimensions Land Pattern Measurement Circuit (Top Thru View) : 3.0 nH (Ideal inductor) : 50 ohm : 50 ohm : 50 ohm : 50 ohm : 50 ohm : 50 ohm L6 : 6.5 nH (Ideal inductor) : 7.2 nH (Ideal inductor) : 1.6 pF (Ideal capacitor) : 10 nH (Ideal inductor) : 3.9 nH (Ideal inductor) : 2.4 nH (Ideal inductor) Package Dimensions & Recommended Land Pattern unit: mm : Laser Printing : ANT. Port (B1) : TX Port (B1) : RX Port (B1) : ANT. Port (B3) : Date code : 1 : C : A : Month code : TX Port (B3) Notice) Please refer to Measurement Circuit for Port information in detail. Terminal Number Marking (6) : RX Port (B3) Others : GND (3) (1) (5) (4) (2) 1 2 2,0 ±0,1 1,6 ±0,1 (1) (2) (3) (4) TOP VIEW FRONT VIEW BOTTOM VIEW UNIT : mm (1) (2) (4) (3) $ 3 (5) (6) (7) Pin(1,2,5,6) 0,27 Pin(1,2,5,6) 0,29 0.65max 0,555 0,565 0,80 Pin(3,4) 0,20 Pin(3,4) 0,765 0,27 0,82 C 0,10 0,20 0,40 0,48 0,35 0,60 0,13 0,765 0,20 0,17 pad and pitch tolerance ±0.03 (5) (6) (7) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Electrical Characteristic min. typ.* max. Center Frequency 1950 MHz Insertion Loss 1920.25 to 1979.75 MHz 1.4 2.1 dB Ripple Deviation 1920.25 to 1979.75 MHz 0.5 1.2 dB Any 20MHz 1920.25 to 1979.75 MHz 1.2 2.0 TX Absolute Attenuation 699. to 960. MHz 33 47 dB LB 1427. to 1511. MHz 35 43 dB MLB 1559. to 1605.89 MHz 40 45 dB GNSS 1710. to 1880. MHz 11 19 dB B3 2010. to 2025. MHz 15 21 dB +15 to +85deg.C 2110.25 to 2169.75 MHz 45 53 dB Rx 2400. to 2483. MHz 25 30 dB WiFi 2.4G 2500. to 2690. MHz 24 29 dB B7/B41 3300. to 3800. MHz 30 33 dB n78 3840. to 3960. MHz 30 37 dB 2f 5760. to 5940. MHz 20 31 dB 3f 5150. to 5950. MHz 20 31 dB WiFi 5G * Typical value at 25±2deg.C TX → ANT. Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Electrical Characteristic min. typ.* max. Center Frequency 2140 MHz Insertion Loss 2110.25 to 2169.75 MHz 1.5 2.2 dB Ripple Deviation 2110.25 to 2169.75 MHz 0.4 1.0 dB Any 20MHz 2110.25 to 2169.75 MHz 1.5 2.0 RX Absolute Attenuation 190. MHz 45 94 dB Rx-Tx 699. to 960. MHz 35 55 dB LB 1427. to 1511. MHz 35 49 dB MLB 1559. to 1605.89 MHz 40 46 dB GNSS 1710. to 1910. MHz 35 43 dB B2/B3 1920.25 to 1979.75 MHz 45 54 dB Tx 2400. to 2483. MHz 31 38 dB WiFi 2.4G 2500. to 2690. MHz 34 40 dB B7/B41 3300. to 3800. MHz 35 46 dB n78 5150. to 5950. MHz 20 37 dB WiFI 5G * Typical value at 25±2deg.C ANT. → RX Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Electrical Characteristic min. typ.* max. Isolation 1805.15 to 1879.85 MHz 55 74 dB 1920.25 to 1979.75 MHz 55 66 dB Tx 1922.5 to 1977.5 MHz 55 67 dBINT Any 4.5MHz, Tx 2110.25 to 2169.75 MHz 54 59 dB Rx 2112.5 to 2167.5 MHz 54 60 dBINT Any 4.5MHz, Rx * Typical value at 25±2deg.C TX → RX Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Electrical Characteristic min. typ.* max. Center Frequency 1745 MHz Insertion Loss 1710.15 to 1784.85 MHz 1.7 2.4 dB Ripple Deviation 1710.15 to 1784.85 MHz 0.8 1.6 dB Any 20MHz 1710.15 to 1784.85 MHz 1.6 2.1 TX Absolute Attenuation 699. to 960. MHz 30 35 dB LB 1427. to 1511. MHz 28 34 dB MLB 1559. to 1605.89 MHz 36 41 dB GNSS 1805.15 to 1879.85 MHz 45 51 dB +15 to +85deg.C,Rx 1805.15 to 1879.85 MHz 44 51 dB Rx 1920. to 2170. MHz 6.0 17.6 dB B1 2300. to 2400. MHz 33 39 dB B40 2400. to 2483. MHz 33 40 dB WiFi 2.4G 2496. to 2690. MHz 30 41 dB n41 2515. to 2675. MHz 30 41 dB n41 for China 2500. to 2690. MHz 30 41 dB B7/B41 3300. to 3800. MHz 25 30 dB n78 3420. to 3570. MHz 27 32 dB 2f 4400. to 5000. MHz 22 26 dB n79 5130. to 5355. MHz 17 25 dB 3f 5150. to 5950. MHz 13 22 dB WiFi 5G * Typical value at 25±2deg.C TX → ANT. Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Electrical Characteristic min. typ.* max. Center Frequency 1842.5 MHz Insertion Loss 1805.15 to 1879.85 MHz 2.7 3.7 dB Ripple Deviation 1805.15 to 1879.85 MHz 1.5 2.6 dB Any 20MHz 1805.15 to 1879.85 MHz 1.5 2.2 RX Absolute Attenuation 95. MHz 45 98 dB Rx-Tx 699. to 960. MHz 32 37 dB LB 1427. to 1511. MHz 28 33 dB MLB 1559. to 1605.89 MHz 29 34 dB GNSS 1710.15 to 1784.85 MHz 45 54 dB Tx 1920. to 2170. MHz 29 35 dB B1 2300. to 2400. MHz 7.0 19.2 dB B40/30 2400. to 2483. MHz 35 41 dB WiFi 2.4G 2496. to 2690. MHz 30 41 dB n41 2500. to 2690. MHz 35 41 dB B7/B41 3300. to 3800. MHz 35 43 dB n78 4400. to 5000. MHz 29 36 dB n79 5150. to 5950. MHz 20 33 dB WiFi 5G * Typical value at 25±2deg.C ANT. → RX Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Electrical Characteristic min. typ.* max. Isolation 1710.15 to 1784.85 MHz 50 58 dB 1712.5 to 1782.5 MHz 50 58 dBINT Any 4.5MHz 1805.15 to 1879.85 MHz 52 59 dB 1807.5 to 1877.5 MHz 52 60 dBINT Any 4.5MHz 2110.25 to 2169.75 MHz 49 60 dB * Typical value at 25±2deg.C TX → RX Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 8/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.8 B: 1.75 K: 2.2 C: 3.50 L: 0.90 D: 4.0 E: 2.0 F: 4.0 G: φ1.5 H: 1.15 Tape Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 SAPAE1G74BA0C0AR00… 10000pcs (φ330) SAPAE1G74BA0C0AR1S… Sample Order (φ178/330) φ178Reel φ330Reel 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 15/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. (a) Aircraft equipment. (b) Aerospace equipment (c) Undersea equipment. (d) Power plant control equipment (e) Medical equipment. (f) Transportation equipment (vehicles, automotive, trains, ships, etc.). (g) Traffic signal equipment. (h) Disaster prevention / crime prevention equipment. (i) Burning / explosion control equipment (j) - AEC-Q200 - PPAP - IATF16949,VDA6.3 - Zero Defect program - Long product life cycle - Automotive 8D failure analysis and report Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product specified in the front page of this product specifications (the "Product" or "Products") when our Product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our Product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our Product deviating from the condition and the environment specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The Product shall not be used for any application which requires especially high reliability or accuracy in order to prevent defect which incurs high possibility of damage to the third party's life, body or property such as the applications listed below as item (a) to (j) (the “Prohibited Application”). You acknowledge and agree that, if you use our Products in the Prohibited Applications, we will not be responsible for any damage caused by such use. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN THE PROHIBITED APPLICATIONS. Application of similar complexity and/ or reliability requirements to the applications listed in the above. For the avoidance of doubt, the Product is not automotive grade, and will not support such requests for automotive as below, also not support other specific requests for automotive. Please note that the only warranty that we provide regarding the Product is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such Products, which are caused under the conditions other than those specified in this specification. All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 16/17

SAPAE1G74BA0C0A ( Band1_Band3 / Unbalanced / 7pin / 2016 ) Important Notice (2/2) Please do not use the Product in molding condition. The Product shall not be used in any other application/model than that of claimed to Murata. In particular we disclaim liability for damages caused by ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you cannot agree the above contents, you should inquire our sales. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the Product to be sold by you, We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our Product. Our Product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. The Product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our Products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our Products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 17/17

Product Information

SAPAE1G74BA0C0A specifications and overview.

Summary

SAW Dual Duplexer for Band1_Band3 / Unbalanced / 7pin /2016

Description

SAW Dual Duplexer for Band1_Band3 / Unbalanced / 7pin /2016

Source title SAPAE1G74BA0C0A Datasheet(PDF) - Murata Manufacturing Co., Ltd

Related Parts

More parts from the same family.

Browse manufacturer