SAM5270R KODENSHI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Milky Diffusion lens type
  • φ5mm(T-13/4) all plastic mold type
  • Radiation color (Amber, Y-Green)
  • Low power consumption O u t l i n e D i m e n s i o n s u n i t : mm 13 2 PIN Connections 1. Anode (Y-Green) 2. Common Cathode 3. Anode (Amber)

( T a = 2 5 oC) Characteristic Symbol Rating Unit Amber Y-Green Power dissipation P D 75 75 mW Forward current I F 30 30 mA *1Peak forward current I FP 50 50 mA Reverse voltage V R 4 4 V Operating temperature range T opr -25 85 ∼ ℃ Storage temperature range T stg -30 100 ∼ ℃ *2Soldering temperature T sol 260℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics ( T a = 2 5 oC) Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward voltage V F Amber IF= 20mA - 2.0 2.5 V Y-Green - 2.1 2.5 *3Luminous intensity IV Amber IF= 20mA 4.4 9 - mcd Y-Green 6.6 11 - Peak wavelength λP Amber IF= 20mA - 630 - nm Y-Green 570 Spectrum bandwidth ∆λ Amber IF= 20mA - 40 - nm Y-Green 30 Reverse current IR VR=4V - - 10 uA *4Half angle θ1/2 Amber IF= 20mA ±86 deg Y-Green ±90 *3.Luminous intensity maximum tolerance for each grade classification limit is ±18% *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity

Fig. 5 Radiation Diagram +20 +60 +100 100 +80 +40 -6050 -100 100 -80 -40 -200 +20 +60 +100 100 +80 +40 -6050 -100 100 -80 -40 -200 AMBER Y-GREEN Relative Luminous Intensity Iv [%] Fig.4 Spectru m Distribution Fig. 3 IF – Ta Fig. 2 I V - IF Forward Current I F [mA] Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Forward Voltage V F [V] Forward Current I F [mA] Forward Current I F [mA] Luminous Intensity Iv [mcd] Fig. 3 IF – Ta Forward Current I F [mA] Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Fig. 1 I F - VF Fig.4 Spectru m Distribution IF=20mA Relative Luminous Intensity Iv [%]

The AUK Corp. products are intended for the use as components in general electronic equipment (Office and co mmunication equipment, m easuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipm ents without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.