SAL2

SAL2 SENSATA | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

www.sensata.com Copyright © 2018 Sensata Technologies, Inc. | SAL2 Joystick Main Features Introduction

• Contactless sensing Hall-effect technology
• Redundant Sensors
• Life greater than 10 million cycles (without detent option)
• 2 sensors on axis
• Integrated temperature compensation
• Environmentally sealed
• Potted electronics
• Standard or customized multifunction grips The SAL2 Joystick from Sensata Technologies provides the reliability and long life required in demanding environmental conditions such as heavy duty industrial applications. Building on Sensata’s industry leading Hall-effect joystick technology, the SAL2 joystick combines flexibility with high mechanical strength. This strength and the unique sensing design make the joystick ideal for rigorous use in rugged, harsh environments offering best durability. The SAL2 Joystick is designed to accommodate standard and custom designed multifunction grips. Custom Modifications
• Output characteristics
• Operating force
• Lever deflection angle
• Mounting Method and Bolt pattern
• Tactile and Latching Detents
• Multifunction grips SPECIFICATIONS Supply Ratings - System Voltage - Voltage Range - Maximum Current 12V or 24V dc 9V … 32V dc 75 mA at 24V dc PWM Output PW2 500 Hz ± 80 Hz CAN Bus Output J19 SAE J1939 Other electrical Characteristics EMI 100 V/m Redundant Sensors Electrical Variant

www.sensata.com Page 2 Copyright © 2018 Sensata Technologies, Inc. DIMENSIONS Life Detent Life > 10 million cycles 3 million cycles Operating temperature Storage temperature - 40°C to 85°C - 50°C to 90°C Horizontal maximum load (165mm from pivot point) 1000 N (250lbs) Vertical load maximum 1110 N (250lbs) Max Torque (Z-axis) 25 Nm (18,5 ft lb) Protection Level IP 67 Electronics Protection Fully potted Lever deflection X/Y max ± 30° (A) Center null zone ± 1.5° Weight <860g Housing Plastic Boot EPDM (black) Vehicle Connection Customer Specified Mechanical SAL2 with bottom Mount Top Gate (+Y and -Y can be Swapped)

www.sensata.com Page 3 Copyright © 2018 Sensata Technologies, Inc. Install dimensions for Bottom Mount SAL2 Joysticks SAL2 with Top Mount Top Gate (+Y and -Y can be Swapped) Install dimensions for Top Mount SAL2 Joysticks

www.sensata.com Page 4 Copyright © 2018 Sensata Technologies, Inc. SAL2 (Torque Curves) for details see MFG datasheet MULTIFUNCTION GRIPS MFG Ball MFG S2 MFG S4 MFG S4E MFG S6 MFG S7

www.sensata.com Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. CONTACT US INDUSTRIAL SOLUTIONS DIVISION Americas +1 (800) 350 2727 sensors.deltatech@sensata.com Europe, Middle East & Africa +359 (2) 809 1826 ost-info.eu@sensata.com Asia Pacific sales.isasia@list.sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7117 Korea +82 (31) 601 2004 India +91 (80) 67920890 Rest of Asia +886 (2) 27602006 ext 2808 HEAVY VEHICLE & OFF-ROAD DIVISION Americas +1 508 236 2196 products@sensata.com Europe, Middle East & Africa +49 30 43 999 0 products@sensata.com Asia Pacific products@sensata.com China +86 (21) 2306 1500 Japan +81 (45) 277 7001 Korea +82 (31) 601 2004 Page 5 Copyright © 2018 Sensata Technologies, Inc. Rev: 01/15/18

• CAN, PWM, Analog ORDERING OPTIONS Pivot Point Shaft Type Top Gate Type Detent Output Options In relation to mounting plane: Knowing the height of the grip required by the customer can help with this selection.
• This is different based on the mounting method. Handle dependent. Very customizable Selecting the top gate will require knowing what mounting method that is desired. The options are mounting from the top side and mounting from the underside.
• Current available options are a ±17° mounting from the top and a ±20° mounting from the bottom. Information can be requested for specific activation angles and detent type. Spring Force Two springs are used for SAL2 products. Combining spring forces to get a slightly lower or higher force is an option. Standard spring torques listed. Input Options
• 5V, 12V Grip to Base Communication
• Through shaft and around shaft grip wiring. (A) less is available on request GENERAL NOTES This information is to assist the user in identifying what he is looking for in the joystick base. There are many options available for SAL2 and specific details on these options will need to come from the Sensata EOC “Electronic Operator Control” team directly. While this information does not fully define a joystick base, it will go a long way to helping the EOC team define the best option for the user.