SAK WEIDMULLER | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Creation date July 2, 2018 11:08:17 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 1 SAK Series SAKR/35 2STB Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com General ordering data Type SAKR/35 2STB Order No. 0183360000 Version SAK Series, Test-disconnect terminal, Rated cross- section: 4 mm², Screw connection, Beige, Direct mounting GTIN (EAN) 4008190131708 Qty. 100 pc(s). Klippon® Connect with clamping yoke Technology The high reliability and variety of designs of the terminal blocks with clamping yoke connections make planning easer and optimises operational safety. Klippon® Connect provides a proven response to a range of different requirements.
Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date July 2, 2018 11:08:17 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 2 Dimensions and weights Width 6.5 mm Width (inches) 0.256 inch Height 42 mm Height (inches) 1.654 inch Depth 40.5 mm Depth (inches) 1.594 inch Net weight 9.44 g Temperatures Continuous operating temp., min. -50 °C Continuous operating temp., max. 100 °C Material data Material PA 66 Colour beige / yellow UL 94 flammability rating V-2 System specifications Version Screw connection, Disconnection element, with sockets, One end without connector Tightening torque (clamping screw for copper conductors) 0.5...1 Nm End cover plate required Yes Number of potentials 1 Number of levels 1 No. of clamping points per level 2 Number of potentials per tier 1 Levels cross-connected internally No PE connection No Mounting rail TS 35 N-function No PE function No PEN function No Additional technical data Explosion-tested version No Installation advice Direct mounting Number of similar terminals 1 Open sides right Type of mounting Snap-on Conductors for clamping (rated connection) Blade size 0.6 x 3.5 mm Clamping range, max. 4 mm² Clamping range, min. 0.13 mm² Clamping screw M 3 Connection cross-section, stranded, max. 4 mm² Connection cross-section, stranded, min. 1.5 mm² Connection direction on side Gauge to IEC 60947-1 A3 Number of connections 2 Stripping length 8 mm Tightening torque, max. 1 Nm Tightening torque, min. 0.5 Nm Torque level with DMS electric screwdriver 2 Twin wire-end ferrules, max. 1.5 mm² Twin wire-end ferrules, min. 0.5 mm² Type of connection Screw connection Wire connection cross section AWG, max. AWG 12 Wire connection cross section AWG, min. AWG 26 Wire connection cross section, finely stranded, max. 4 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, max. 2.5 mm² Wire connection cross-section, finely stranded with wire-end ferrules DIN 46228/1, min. 0.5 mm² Wire connection cross-section, finely stranded, min. 0.5 mm² Wire connection cross-section, solid core, max. 4 mm² Wire connection cross-section, solid core, min. 0.5 mm²
Weidmüller Interface GmbH & Co. KG Klingenbergstraße 16 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.comTechnical data Creation date July 2, 2018 11:08:17 AM CEST Catalogue status 29.06.2018 / We reserve the right to make technical changes. 3 Disconnect terminals Cross-disconnect without Integral test socket Yes Slitting Pivoting Rating data Rated cross-section 4 mm² Rated voltage 400 V Rated current 10 A Standards IEC 60947-7-1 Volume resistance according to IEC 60947-7-x 1 mΩ Rated impulse withstand voltage 6 kV Pollution severity 3 Classifications ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 ETIM 6.0 EC000902 UNSPSC 30-21-18-11 eClass 5.1 27-14-11-26 eClass 6.2 27-14-11-26 eClass 7.1 27-14-11-26 eClass 8.1 27-14-11-26 eClass 9.0 27-14-11-26 eClass 9.1 27-14-11-26 Product information Descriptive text technical data Tightening torque via the sockets is 0.5 - 0.7 Nm. Descriptive text accessories QB 25 blank, refer to "Accessories" section. Note that max. conductor connection with QB = 2.5 mm². Twin wire-end ferrules ZH 0.5 - ZH 1.5 can be used. Approvals Approvals ROHS Conform Downloads Approval/Certificate/Document of Conformity DE_PT1302_20160418_572_ISSUE01.pdf Engineering Data EPLAN, WSCAD Safety note Safety notice Safety Information