SAFFB1G47AA2F0A MURATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 8
Technical content
■ Feature Revision B Note : This Murata SAW Component is Consumer grade product and applicable for Cellular phone or similar end devices. Please also read Important Notice at the end of this document. Datasheet of SAW Device Support n75+76 SAW Single Filter Murata PN: SAFFB1G47AA2F0A for Band32_n75_n76 / Unbalanced / 5pin /1109
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) General Information - Operating temperature : - Storage temperature : - Input Power - D.C. Voltage between the terminals : - Minimum Resistance between the terminals : - RoHS compliance : - ESD (ElectroStatic Discharge) sensitive device Yes -20 to +85deg.C -40 to +85deg.C 3V (25+/-2 deg.C) 10M ohm +15.0dBm 5000h +50deg.C (1) +13.5dBm 5000h +50deg.C (2) (1) applicable for W-CDMA, LTE, NR(DFT-s-OFDM) (2) applicable for NR(CP-OFDM) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 1/7
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) Dimensions Land Pattern Measurement Circuit (Top Thru View) (1) (4) Others Notice) Please refer to Measurement Circuit for Port information in detail. Terminal Number Marking Package Dimensions & Recommended Land Pattern unit: mm : Laser Printing : Unbalanced port : Unbalanced port : GND : Date code : C : d 2 : Month code : 7.0 nH (Ideal inductor) : 7.0 nH (Ideal inductor) : 50 ohm : 50 ohm All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 2/7
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) Electrical Characteristic min. typ.* max. Center Frequency 1472 MHz Insertion Loss 1427. to 1432. MHz 1.6 2.3 dB n76 1432. to 1517. MHz 1.7 2.3 dB n75 1452. to 1496. MHz 1.5 2.1 dB B32 Ripple Deviation 1427. to 1517. MHz 0.6 1.5 dB VSWR 1427. to 1517. MHz 1.9 2.3 Absolute Attenuation 100. to 800. MHz 43 48 dB 703. to 748. MHz 44 50 dB B28 Tx 814. to 849. MHz 42 47 dB B26 Tx 832. to 862. MHz 41 47 dB B20 Tx 880. to 915. MHz 41 46 dB B8 Tx 1710. to 1785. MHz 36 40 dB B3 Tx 1920. to 1980. MHz 38 42 dB B1 Tx 2400. to 2500. MHz 38 44 dB ISM 2.4G 2500. to 2570. MHz 37 44 dB B7 Tx 2496. to 2690. MHz 36 43 dB B41 Tx 3300. to 4200. MHz 27 33 dB n77 4356. to 4476. MHz 23 32 dB 3f0 4900. to 5950. MHz 23 28 dB ISM 5G 6000. to 12750. MHz 5.0 19.0 dB * Typical value at 25±2deg.C Single Filter Characteristics Unit Note(-20~+85deg.C) All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 3/7
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) Electrical Characteristic All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 4/7
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) Dimensions of Tape & Reel unit: mm Carrier Tape A: 8.0 J: 1.05 B: 1.75 K: 1.25 C: 3.50 L: 0.55 D: 4.0 E: 2.00 F: 2.0 G: φ1.5 H: 0.75 Tape Reel A: φ13.0 A: φ13.0 B: 13.5max B: 15.5max C: 9.0 C: 9.5 D: φ60 D: φ100 E: φ178 E: φ330 SAFFB1G47AA2F0AR1X… 10000pcs (φ178) SAFFB1G47AA2F0AR1S… Sample Order (φ178/330) φ178Reel φ330Reel 160 min. 80~280 400~560 Trailer tape Components Leader Cavity Unit: mm Cover tape All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 5/7
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) Important Notice (1/2) PLEASE READ THIS NOTICE BEFORE USING OUR PRODUCTS. (a) Aircraft equipment. (b) Aerospace equipment (c) Undersea equipment. (d) Power plant control equipment (e) Medical equipment. (f) Transportation equipment (vehicles, automotive, trains, ships, etc.). (g) Traffic signal equipment. (h) Disaster prevention / crime prevention equipment. (i) Burning / explosion control equipment (j) - AEC-Q200 - PPAP - IATF16949,VDA6.3 - Zero Defect program - Long product life cycle - Automotive 8D failure analysis and report Please make sure that your product has been evaluated and confirmed from the aspect of the fitness for the specifications of our product specified in the front page of this product specifications (the "Product" or "Products") when our Product is mounted to your product. All the items and parameters in this product specification/datasheet/catalog have been prescribed on the premise that our Product is used for the purpose, under the condition and in the environment specified in this specification. You are requested not to use our Product deviating from the condition and the environment specified in this specification. WE HEREBY DISCLAIMS ALL OTHER WARRANTIES REGARDING THE PRODUCTS, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, THAT THEY ARE DEFECT-FREE, OR AGAINST INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. The Product shall not be used for any application which requires especially high reliability or accuracy in order to prevent defect which incurs high possibility of damage to the third party's life, body or property such as the applications listed below as item (a) to (j) (the “Prohibited Application”). You acknowledge and agree that, if you use our Products in the Prohibited Applications, we will not be responsible for any damage caused by such use. Furthermore, YOU AGREE TO INDEMNIFY AND DEFEND US AND OUR AFFILIATES AGAINST ALL CLAIMS, DAMAGES, COSTS, AND EXPENSES THAT MAY BE INCURRED, INCLUDING WITHOUT LIMITATION, ATTORNEY FEES AND COSTS, DUE TO THE USE OF OUR PRODUCTS IN THE PROHIBITED APPLICATIONS. Application of similar complexity and/ or reliability requirements to the applications listed in the above. For the avoidance of doubt, the Product is not automotive grade, and will not support such requests for automotive as below, also not support other specific requests for automotive. Please note that the only warranty that we provide regarding the Product is its conformance to the specifications provided herein. Accordingly, we shall not be responsible for any defects in products or equipment incorporating such Products, which are caused under the conditions other than those specified in this specification. All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 6/7
SAFFB1G47AA2F0A ( Band32_n75_n76 / Unbalanced / 5pin / 1109 ) Important Notice (2/2) Please do not use the Product in molding condition. The Product shall not be used in any other application/model than that of claimed to Murata. In particular we disclaim liability for damages caused by ・ deviation or lapse in function of engineering sample, ・ improper use of engineering samples. We disclaim any liability for consequential and incidental damages. If you cannot agree the above contents, you should inquire our sales. Customer acknowledges that engineering samples may deviate from specifications and may contain defects due to their development status. We reject any liability or product warranty for engineering samples. the use of the engineering sample other than for evaluation purposes, particularly the installation or integration in the Product to be sold by you, We expressly prohibit you from analyzing, breaking, Reverse-Engineering, remodeling altering, and reproducing our Product. Our Product cannot be used for the product which is prohibited from being manufactured, used, and sold by the regulations and laws in the world. The Product is ESD (ElectroStatic Discharge) sensitive device. When you install or measure this, you should be careful not to add antistatic electricity or high voltage. Please be advised that you had better check anti serge voltage. We do not warrant or represent that any license, either express or implied, is granted under any our patent right, copyright, mask work right, or our other intellectual property right relating to any combination, machine, or process in which our Products or services are used. Information provided by us regarding third-party products or services does not constitute a license from us to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from us under our patents or other intellectual property. Please do not use our Products, our technical information and other data provided by us for the purpose of developing of mass-destruction weapons and the purpose of military use. Moreover, you must comply with "foreign exchange and foreign trade law", the "U.S. export administration regulations", etc. Please note that we may discontinue the manufacture of our products, due to reasons such as end of supply of materials and/or components from our suppliers. Customer acknowledges that Murata will, if requested by you, conduct a failure analysis for defect or alleged defect of Products only at the level required for consumer grade Products, and thus such analysis may not always be available or be in accordance with your request (for example, in cases where the defect was caused by components in Products supplied to Murata from a third party). All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd 7/7