DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

SAC(500W) Series Mechanical Data Maximum Ratings And Characteristics Ratings at 25 ambient temperature unless otherwise specified.℃ Notes 1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25 per Fig. 2 .℃ Peak Pulse Power Dissipation on 10/1000μs waveform (Note 1) Steady State Power Dissipation at T = 75°C with lead lengths or 0.375"L (9.5mm) Peak Pulse Power Surge Current with a 10/1000 μS waveform (Note1.FIG.3) Operating junction and Storage Temperature Range RATING SYMBOL VALUE UNITS PPPM PM(A IPPM TJS T G Minimum 500 -55 to +175 SEE TABLE1 Watts Amps Amps Case: JEDEC DO-15. Molded plastic over a passivated junction Terminals: Solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) AnyMounting Position: 0.015ounce,0.4gramWeight: Plastic package has Underwriters Laboratory Flammability Classification 94V-O Glass passivated junction 500W Peak Pulse Power capability on 10/1000 s waveformμ Excellent clamping capability Repetition rate (duty cycle):0.01% Low incremental surge resistance Fast response time: typically less than 1.0ps from 0 Volts to B min.V Ideal for data line applications High temperature soldering guaranteed: 265°C/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension Pb-free plated REV 2016 08 10

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI .. . www.spsemi.cn Page 2 of 4 SAC5.0 SAC6.0 SAC7.0 SAC8.0 SAC8.5 SAC10 SAC12 SAC15 SAC18 SAC22 SAC26 SAC30 SAC36 SAC45 SAC50

Electrical Characteristics

“ ”Stand for commonly used models* SAC Part Number Stand-Off Voltage V (V) RWM Minimum Breakdown Voltage at I =1.0mA T Maximum Reverse Leakage at V WM Maximum Clamping Voltage at I =5.0A PP Maximum Peak Pulse Current Per FIG.3 Maximum Junction Capacitance at 0 Volts Working Inverse Blocking Voltage Inverse Blocking Leakage Current Peak Inverse Blocking Voltage V (V) BR I( u A ) R V (V) C I (A) PP C( p F ) J V (V) WIB I (mA) IB V( V ) PIB 5.0 6.0 7.0 8.0 8.5 10.0 12.0 15.0 18.0 22.0 26.0 30.0 36.0 45.0 50.0 7.60 7.90 8.33 8.89 9.44 11.10 13.30 16.70 20.00 24.40 28.90 33.30 40.00 50.00 55.50 300 300 300 100 10.0 11.2 12.6 13.4 14.0 16.3 19.0 23.6 28.8 35.4 42.3 48.6 60.0 77.0 88.0 44.0 41.0 38.0 36.0 34.0 29.0 25.0 20.0 15.0 14.0 11.1 10.0 8.6 6.8 5.8 150 150 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 SAC(500W) Series Dimensions (DO-15) DO-204AC(DO-15) Dimensions in inches and(millimeters) 1.0 25.4() MIN. 0.300 7 6(.) 0.230 5 8(.) 1.0 25.4() MIN. 0.034 0.86() 0.028 0.71() 0.140 3 6(.) 0.104 2 6(.) DIA.DIA. REV 2016 08 10

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI . www .spsemi.cn Page 3 of 4 Characteristic Curves (TA=25 unless otherwise noted)℃ Fig.1 Peak Pulse Power Rating Fig.2 Power Derating Curve Fig.3 Pulse Waveform Fig.4 AC Line Protection Application 00 1.0 2.0 4.03.0 sec Waveformμ. as defined by R.E.A Half Value IPPM tr=10uS Peak Value IPPM 2 5J ℃ Pulse width(td) is defined ad the Point where the Peak Current Decays to 50% of I PPM 100 150 I -Peak Pulse Current(%) PPM t-T ime(mS) td 5 5 0 7 5 100 125 150 175 200 100 T -Lead Temperature( )L ℃ Percentage of Rated Power(%) P -Peak Pulse Power (kW) PPM 0.1μs 10μs 10ms 0.1 t d - Pulse Width (sec.) 1.0μs 100μs 1.0ms Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C td td td P P P Square Half SINE Exponentia Peak Power (single pulse) A verage Power Low Capacitance TVS Application Note: Device must be used with two units in parallel,opposite in polarity as shown in circuit for AC signal line protection. Recommended Soldering Conditions Recommended Conditions Reflow Soldering ts tP tL Ti me time to peak temperature (t 25 to peak)℃ T emperature T (min)s T (max)s TL TP Preheat Ramp-down Ramp-up Critical Zone Tt o TLP Re”ow Condition Pb-Free assembly (see Fig.1) Pre Heat -Temperature Min(T ) s(min) emperature Max(T ) s(max) ime(Min to Max)(t ) s A verage ramp up rate (Liquidus Temp(T ) to peak)L T to T -Ramp-up Rates(max) L Re”ow emperature(T )(Liquidus)L emperature(t )L Peak Temp(T )P T ime within 5 of actual Peak Temp(t )℃ P Ramp-down Rate Time 25 to Peak Temp(T )℃ P Do not exceed +150 ℃ +200 ℃ 60-180secs 3 /sec.Max.℃ 3 /sec.Max.℃ +217 ℃ 60-150secs +260(+0/-5) ℃ 30 secs.Max. 6 /sec.Max.℃ 8 min.Max. +260 ℃ SAC(500W) Series REV 2016 08 10

/UNI77ac/UNI96f7/UNI7535/UNI5b50 SPSEMI . www .spsemi.cn Page 4 of 4 SAC(500W) Series Marking Code Cathode Band SAC5.0 **** Marking Code Logo Date Code REV 2016 08 10 Packaging L W H B T E E A Z ± º5 Dimensions in millimeters BA Z ET L1-L2 L W H Quantity