SAB5370 AUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Colorless transparency lens type
  • φ5mm(T-13/4) all plastic mold type
  • Radiation color (Amber, Blue)
  • Low power consumption O u t l i n e D i m e n s i o n s u n i t : mm PIN Connections 1.Blue 2.Common Cathode 3.Amber SSeemmiiccoonndduuccttoorr

Characteristic Symbol Ratings Unit Power Dissipation P D 85 mW Forward Current I F 30 mA *1Peak Forward Current I FP 50 mA Reverse Voltage V R 4 V Operating Temperature T opr -25∼85 ℃ Storage Temperature T stg -30∼100 ℃ *2Soldering Temperature T sol 260℃ for 5 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package

Electrical Characteristics

Characteristic Symbol Test Condition Min. Typ. Max. Unit Blue - 3.3 3.7 Forward Voltage V F Amber IF= 20mA - 1.8 2.3 V Blue - 200 - *3Luminous Intensity IV Amber IF= 20mA - 200 - mcd Blue - 470 - Peak Wavelength λP Amber IF= 20mA - 630 - nm Blue - 30 - Spectrum Bandwidth Δ λ Amber IF= 20mA - 35 - nm Reverse Current IR VR=4V - - 10 uA Half angle θ1/2 IF= 20mA - ±20 - deg *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity

Fig.4 Spectrum Distribution Fig. 3 IF – Ta Fig. 2 I V - IF Fig. 1 I F - VF Fig. 5 Radiation Diagram Forward Current I F [mA] Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Forward Voltage V F [V] Forward Current I F [mA] Forward Current I F [mA] Luminous Intensity Iv [mcd] Relative Luminous Intensity Iv [%]

These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipm- ents which require high quality and/or reliabi lity, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK.