SAB-497AB1DS6-Q5E BANNER | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
WARNING:
- Do not use this device for personnel protection
- Using this device for personnel protection could result in serious injury or death.
- This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A device failure or malfunction can cause either an energized (on) or de- energized (off) output condition. Models Model Beams Supply Current Range (on 90% White Card) Sensing Mode Output Connector SAB-497AB1DS6-Q5E 6 150 mA 200 mm (8 in) Diffuse, Infrared, 940 nm Light Operate, Bipolar 150 mm (6 in) PVC cable with a 4-pin M12/Euro-style quick disconnectSAB-998AB1DXL13-Q5E 13 325 mA 762 mm (30 in) Wiring Diagram 10-30V dc Load Load Key 1. Brown 2. White 3. Blue 4. Black 4-Pin Male Connector 1 4 2 3 Specifications Supply Voltage
10 V dc to 30 V dc (10% maximum ripple)
Supply Protection Circuitry Protected against reverse polarity and transient voltages Output Configuration Solid-state Bipolar: NPN and PNP Rating: 100 mA maximum each output at 25 °C Off-state leakage current: NPN: less than 200 μA at 30 V dc PNP: less than 10 μA at 30 V dc ON-state saturation voltage: NPN: less than 1.6 V at 100 mA PNP: less than 3.0 V at 100mA Protected against output short-circuit, continuous overload, and false pulse on power-up Wavelength Infrared LED, 940 nm Output Response 3 ms on/off Operating Conditions 95% at +50 °C maximum relative humidity (non-condensing) Environmental Rating IEC IP50 Indicators Green on: Power on Amber on: Output on Sensor Amber on: Light sensed Sensor Array Bar (Diffuse) Original Document 205764 Rev. D
29 May 2019
20.0 [0.79] 38.0 [1.50] 36.0 [1.42] Length First Beam Beam to Beam Accessories Brackets SMBSAB-IN
- Mounting bracket facing in
- 12 gauge steel 58 mm 44.5 mm 35 mm SMBSAB-OUT
- Mounting bracket facing out
- 12 gauge steel 36 mm 25.4 mm 35 mm Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. Sensor Array Bar (Diffuse) © Banner Engineering Corp. All rights reserved