SA40-1313 ASTEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
40 Watts
CSA CSA22.2-234 LR53982C VDE VDE0805, IEC 950 11774-3336-1164 EN 60950 CB certificate and report UL330-132002 / USA
- L o w c o s t
- Universal input
- 3” x 5” footprint
- Built-in EMI filter
- Low output ripple
- 100% computerized final testing
- Overvoltage protection
- O v e r l o a d p r o t e c t i o n Operating temperature: 0°to 50°C ambient Storage temperature: -40°to 85°C Thermal regulation: ±.04% per °C MTBF: >100,000 hours at full load and 25°C ambient conditions per MIL-HDBK-217E Input Input range 85-264 VAC Frequency 47-63 Hz Inrush current <25 A peak @ 115 VAC; <50 A peak @ 230 VAC, cold start at 25°C Input current 1 A max. (RMS) @ 115 VAC;
0.5 A max (RMS) @ 230 VAC
Efficiency 70% typical at full load, nominal line Power factor >0.65 EMI filter Meets FCC 20780 Class B and VDE 0871 Level B Output Maximum power 40 W convection Cross regulation ±2% on output 1; ±5% on outputs 2, 3 Overshoot None Hold-up time 20 ms @ full load, 115 VAC nominal line Overvoltage protection +5 V trip voltage less than 6.8 V; recycle AC safety ground to reset Safety ground Leakage current < 0.5 mA @ 250 VAC, 50 Hz Overload protection Short circuit protected on all outputs Total Power: 40 Watts Input Voltage: 85-264 VAC # of Outputs: Triple Environmental Safety America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-966288 W9959_03_LP_final_074-098_25 2/8/02 4:03 PM Page 88
Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698
Ordering Information
Model Output Minimum Maximum Peak Regulation 2 Ripple Number Voltage Load Load Load 1 P/P (PARD)3 SA40-1313 5 V 0.45 A 5 A — +5%, -4% 50 mV 12 V 0.3 A 3 A 4.5 A ±5% 120 mV -12 V 0 A 0.35 A — ±10% 120 mV 1. Peak current lasting <20 seconds. (Maximum Po = 60 W) 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF capacitor in parallel with 0.1 µF capacitor at rated line voltage and load ranges. Connector SA40-1313 SK1-1 Live SK1-2 Pin removed SK1-3 Neutral SK2-1 +12 V SK2-2 +5 V SK2-3 +5 V SK2-4 Common SK2-5Common SK2-6 -12 V Mating Connectors AC Input: Molex 09-91-0300 DC Outputs: Molex 09-91-0600 Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm). 3. Mounting holes M1, M2 and M3 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 6. For safety purposes, on mounting hole M4 use plastic standoff. 7. Warranty: 1 year 8. Weight: 0.54 lb / 0.25 kg 0.14 (3.5) 2.57 (65.2) 0.156 (4) .022 (5.5) 0.22 (5.5) 1.34 (34.0) 4.57 (116.0) 5.0 (127.0) SK 1 N SK 2 DIA (3 places) 0.12 (3) M1 M2 M3M4 3.0 (76.2) Pin Assignments SA40-1313 Series 89www.astec.com W9959_03_LP_final_074-098_25 2/8/02 4:03 PM Page 89