SA33C

SMF5.0A_1 SOCAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 56

Technical content

Features

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMF Series 5.0 To 190 V 200W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMAJ Series 5.0 To 440 V 400W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AC (SMA) Inches Millimeters Dimensions Min Max Min Max A 0.049 0.064 1.230 1.630 B 0.162 0.179 4.10 4.550 C 0.099 0.109 2.510 2.760 D 0.077 0.089 1.960 2.260 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.192 0.206 4.87 5.220 H 0.006 0.012 0.152 0.305 I 0.070 - 1.800 - J 0.082 - 2.100 - K - 0.090 - 2.300 L 0.082 - 2.100 - DO-214AC (SMA) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMAJ Series 5.0 To 440 V 400W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMAJ Series 5.0 To 440 V 400W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMBJ Series 5.0 To 440 V 600W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AA (SMB) Inches Millimeters Dimensions Min Max Min Max A 0.077 0.087 1.960 2.200 B 0.171 0.191 4.350 4.850 C 0.130 0.155 3.300 3.940 D 0.084 0.096 2.130 2.440 E 0.030 0.060 0.750 1.520 F - 0.008 - 0.203 G 0.201 0.216 5.100 5.500 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - DO-214AA (SMB) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMBJ Series 5.0 To 440 V 600W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMBJ Series 5.0 To 440 V 600W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMCJ Series 5.0 To 440 V 1500W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 1500W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AB (SMC) Inches Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.860 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - DO-214AB (SMC) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMCJ Series 5.0 To 440 V 1500W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMCJ Series 5.0 To 440 V 1500W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AB (SMC) Inches Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.860 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - DO-214AB (SMC) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SMDJ Series 5.0 To 440 V 3000W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) P4SMAJ Series 6.8 To 600 V 400W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AC (SMA) Inches Millimeters Dimensions Min Max Min Max A 0.049 0.064 1.230 1.630 B 0.162 0.179 4.10 4.550 C 0.099 0.109 2.510 2.760 D 0.077 0.089 1.960 2.260 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.192 0.206 4.87 5.220 H 0.006 0.012 0.152 0.305 I 0.070 - 1.800 - J 0.082 - 2.100 - K - 0.090 - 2.300 L 0.082 - 2.100 - DO-214AC (SMA) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) P4SMAJ Series 6.8 To 600 V 400W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) P6SMBSeries 6.8 To 600 V 600W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AA (SMB) Inches Millimeters Dimensions Min Max Min Max A 0.077 0.087 1.960 2.200 B 0.171 0.191 4.350 4.850 C 0.130 0.155 3.300 3.940 D 0.084 0.096 2.130 2.440 E 0.030 0.060 0.750 1.520 F - 0.008 - 0.203 G 0.201 0.216 5.100 5.500 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - DO-214AA (SMB) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) P6SMBSeries 6.8 To 600 V 600W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) P6SMB43A P6SMB43CA 43A 43C 36.8 40.85 45.15 1 59.3 1012 5 Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) 1.5SMC Series 6.8 To 600 V 1500W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 1500W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AB (SMC) Inches Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.860 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - DO-214AB (SMC) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) 1.5SMC Series 6.8 To 600 V 1500W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) 5.0 SMDJ Series 11 To 440 V 5000W Uni-directional Bi-directional u For surface mounted applications in order to optimize board space u Low leakage u Uni and Bidirectional unit u Glass passivated junction u Low inductance u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 25V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-214AB (SMC) Inches Millimeters Dimensions Min Max Min Max A 0.114 0.126 2.860 3.160 B 0.260 0.280 6.520 7.020 C 0.220 0.245 5.520 6.150 D 0.079 0.103 1.980 2.590 E 0.030 0.060 0.750 1.510 F - 0.008 - 0.203 G 0.305 0.320 7.640 8.020 H 0.006 0.012 0.152 0.305 I 0.129 - 3.300 - J 0.094 - 2.400 - K - 0.165 - 4.200 L 0.094 - 2.400 - DO-214AB (SMC) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) 5.0 SMDJ Series 11 To 440 V 5000W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) 5.0 SMDJ Series 11 To 440 V 5000W Part Number Marking Breakdown Voltage VBR (V) @IT Uni Bi Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SACB Series 5.0 To 190 V 500W Low Capacitance Uni-directional u Glass passivated chip u 500W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant DO-214AA(SMB) Inches Millimeters Dimensions Min Max Min Max A 0.077 0.087 1.960 2.200 B 0.171 0.191 4.350 4.850 C 0.130 0.155 3.300 3.940 D 0.084 0.096 2.130 2.440 E 0.030 0.060 0.750 1.520 F - 0.008 - 0.203 G 0.201 0.216 5.100 5.500 H 0.006 0.012 0.152 0.305 I 0.089 - 2.260 - J 0.085 - 2.160 - K - 0.107 - 2.740 L 0.085 - 2.160 - Breakdown Voltage VBR @IT=1.0mA (V) Part Number Device Marking Code Reverse Stand-Off Voltage VRWM (V) MIN Maximum Reverse Leakage IR @VRWM (μA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Junction Capacitance @0V (pF) Working Inverse Blocking Voltage VWIB (V) Inverse Blocking Leakage Current IIB @VWIB (mA) Peak Inverse Voltage VPIB (V) SACB10 SAK 10.0 11.10 5 16.3 29.0 45 75 1 100 SACB12 SAL 12.0 13.30 5 19.0 25.0 45 75 1 100 SACB15 SAM 15.0 16.67 5 23.6 20.0 45 75 1 100 SACB18 SAN 18.0 20.00 5 28.8 15.0 45 75 1 100 SACB22 SAP 22.0 24.40 5 35.4 14.0 45 75 1 100 SACB26 SAQ 26.0 28.90 5 42.3 11.1 45 75 1 100 SACB30 SAR 30.0 33.30 5 48.6 10.0 45 75 1 100 SACB36 SAS 36.0 40.00 5 60.0 8.6 45 75 1 100 SACB45 SAT 45.0 50.00 5 77.0 6.8 45 150 1 200 SACB50 SAU 50.0 55.50 5 88.0 5.8 45 150 1 200 Electrical Characteristics (TA=25℃ unless otherwise noted) Dimensions DO-214AA (SMB) Cathode Band

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SM8S Series 10 To 43 V 6600W u Junction passivation optimized design passivated anisotropic rectifier technology u T J=175°C capability suitable for high reliability and automotive requirement u Available in uni-directional polarity only u Low leakage current u Low forward voltage drop u High surge capability u Meets ISO7637-2 surge specification (varied by test condition) u Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C u AEC-Q101 qualified u Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC DO-218AB Dimensions

www.socay.com Surface Mount Transient Voltage Suppressors (TVS) SM8S Series 10 To 43 V 6600W Breakdown Voltage VBR (V) Part Number Stand-Off Voltage VMW (V) MIN. MAX. Test Current I T (mA) Maximum Reverse Leakage at VWM I D(µA) Maximum Reverse at VWM TJ=175°C ID(µA) Maximum Peak Pulse Current at 10/1000µs Waveform (A) Maximum Clamping Voltage at IPPM VC (V) Note: For all types maximum V F = 1.8V at I F = 100A measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) P4KE Series 6.8 To 600 V 400W Uni-directional Bi-directional u Glass passivated chip junction in DO-41 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 400W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-204AL (DO-41) Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.165 0.205 4.19 5.21 C 0.028 0.033 0.71 0.84 D 0.090 0.117 2.29 2.97 DO-204AL (DO-41) Cathode Band

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) P4KE Series 6.8 To 600 V 400W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) P4KE Series 6.8 To 600 V 400W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) SA Series 5.0 To 190 V 500W Uni-directional Bi-directional u Glass passivated chip junction in DO-15 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 500W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-204AC (DO-15) Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.230 0.300 5.85 7.63 C 0.028 0.033 0.71 0.84 D 0.102 0.142 2.60 3.61 DO-204AC (DO-15) Cathode Band

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) SA Series 5.0 To 190 V 500W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) SA Series 5.0 To 190 V 500W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise no ted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) P6KE Series 6.8 To 600 V 600W Uni-directional Bi-directional u Glass passivated chip junction in DO-15 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-204AC (DO-15) Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.165 0.205 4.19 5.21 C 0.028 0.033 0.71 0.84 D 0.090 0.117 2.29 2.97 DO-204AC (DO-15) Cathode Band

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) P6KE Series 6.8 To 600 V 600W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) P6KE Series 6.8 To 600 V 600W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) P6KE120 P6KE120C 97.2 108.00 132.00 1 173.0 3,47 5 P6KE220 P6KE220C 175.0 198.00 242.00 1 344.0 174 5 Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Axial Lead Transient Voltage Suppressors (TVS) 1.5KE Series 6.8 To 600 V 1500W Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Uni-directional Bi-directional u Glass passivated chip junction in DO-15 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 600W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) DO-201 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.285 0.375 7.24 9.53 C 0.038 0.042 0.97 1.07 D 0.189 0.209 4.79 5.30

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 1.5KE Series 6.8 To 600 V 1500W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 1.5KE Series 6.8 To 600 V 1500W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 3KP Series 5.0 To 190 V 3000W Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 3000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) R6/P600 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.64 9.14 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.64 9.14

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 3KP Series 5.0 To 190 V 3000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 3KP Series 5.0 To 190 V 3000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 5KP Series 5.0 To 190 V 5000W Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 5000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) R6/P600 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.64 9.14 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.64 9.14

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 5KP Series 5.0 To 190 V 5000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 5KP Series 5.0 To 190 V 5000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) Note: 1. Suffix 'A ' denotes 5% tolerance device. Without 'A' denotes 10% tolerance device 2. Add suffix 'C 'or ' CA ' after part number to specify Bi-directional devices 3. For Bi-Directional devices having VR of 10 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 8KP Series 24 To 43 V 8000W Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 8000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time u RoHS compliant R6/P600 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.64 9.14 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.64 9.14 Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) 8KP24A 8KP24CA 24 26.7 29.5 1 38.9 206 5 8KP33A 8KP33CA 33 36.7 40.6 1 53.3 150 5 8KP36A 8KP36CA 36 40.0 44.2 1 58.1 148 5 8KP40A 8KP40CA 40 44.4 49.1 1 64.5 124 5 8KP43A 8KP43CA 43 47.8 52.8 1 69.4 115 5 Electrical Characteristics (TA=25℃ unless otherwise noted) Dimensions R6/P600 Cathode Band

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 15KPA Series 17 To 280 V 15000W Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 15000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) R6/P600 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.64 9.14 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.64 9.14

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 15KPA Series 17 To 280 V 15000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) 15KPA17A 15KPA17CA 17 18.99 20.79 50 29.3 515.4 5000 15KPA18A 15KPA18CA 18 20.11 22.01 50 30.9 488.7 5000 15KPA20A 15KPA20CA 20 22.34 24.46 20 34.3 440.2 1500 15KPA22A 15KPA22CA 22 24.57 26.91 10 37.1 407.0 500 15KPA24A 15KPA24CA 24 26.81 29.35 5 40.7 371.0 150 15KPA26A 15KPA26CA 26 29.04 31.80 5 44.0 343.2 50 15KPA28A 15KPA28CA 28 31.28 34.24 5 47.5 317.9 25 15KPA30A 15KPA30CA 30 33.51 36.70 5 50.7 297.8 15 15KPA33A 15KPA33CA 33 36.90 40.40 5 54.7 276.1 2 15KPA36A 15KPA36CA 36 40.20 44.00 5 59.8 252.5 2 15KPA40A 15KPA40CA 40 44.70 48.90 5 65.8 229.5 2 15KPA43A 15KPA43CA 43 48.00 52.60 5 69.8 216.3 2 15KPA45A 15KPA45CA 45 50.30 55.00 5 72.8 207.4 2 15KPA48A 15KPA48CA 48 53.60 58.70 5 77.7 194.3 2 15KPA51A 15KPA51CA 51 57.00 62.40 5 82.9 182.1 2 15KPA54A 15KPA54CA 54 60.30 66.00 5 87.7 172.2 2 15KPA58A 15KPA58CA 58 64.80 70.90 5 93.8 161.0 2 15KPA60A 15KPA60CA 60 67.00 73.40 5 97.4 155.0 2 15KPA64A 15KPA64CA 64 71.50 78.30 5 104.2 144.9 2 15KPA70A 15KPA70CA 70 78.20 85.60 5 113.6 132.9 2 15KPA75A 15KPA75CA 75 83.80 91.70 5 122.0 123.8 2 15KPA78A 15KPA78CA 78 87.10 95.40 5 126.1 119.7 2 15KPA85A 15KPA85CA 85 94.90 104.00 5 137.6 109.7 2 15KPA90A 15KPA90CA 90 100.50 110.10 5 145.6 103.7 2 15KPA100A 15KPA100CA 100 111.70 122.30 5 161.3 93.6 2 15KPA110A 15KPA110CA 110 122.90 134.50 5 178.6 84.5 2 15KPA120A 15KPA120CA 120 134.00 146.80 5 192.3 78.5 2 15KPA130A 15KPA130CA 130 145.20 159.00 5 208.3 72.5 2 15KPA150A 15KPA150CA 150 167.60 183.50 5 241.9 62.4 2 15KPA160A 15KPA160CA 160 178.70 195.70 5 258.6 58.4 2 15KPA170A 15KPA170CA 170 189.90 207.90 5 272.7 55.4 2 15KPA180A 15KPA180CA 180 201.10 220.10 5 288.5 52.3 2 15KPA200A 15KPA200CA 200 223.40 244.60 5 319.1 47.3 2 15KPA220A 15KPA220CA 220 245.70 269.10 5 428.6 42.2 2 15KPA240A 15KPA240CA 240 268.10 293.50 5 384.6 39.3 2 15KPA260A 15KPA260CA 260 290.40 318.00 5 416.7 36.2 2 15KPA280A 15KPA280CA 280 312.80 342.40 5 454.5 33.2 2 Note: 1. For Bi-Directional devices having V R of 30 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 20KPA Series 20 To 300 V 20000W Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 20000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) R6/P600 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.64 9.14 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.64 9.14

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 20KPA Series 20 To 300 V 20000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN MAX Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA) 20KPA20A 20KPA20CA 20 22.34 50 36.8 548.9 5000 5000 20KPA24A 20KPA24CA 24 26.81 50 41.2 490.3 5000 5000 20KPA26A 20KPA26CA 26 29.04 50 22.7 451.9 2000 1500 20KPA28A 20KPA28CA 28 31.28 50 48.0 420.8 1000 500 20KPA30A 20KPA30CA 30 33.51 5 51.5 392.2 250 150 20KPA32A 20KPA32CA 32 35.74 5 54.3 372.0 150 50 20KPA34A 20KPA34CA 34 38.00 5 57.5 351.3 50 25 20KPA36A 20KPA36CA 36 40.20 5 61.5 328.5 20 15 20KPA40A 20KPA40CA 40 44.70 5 67.8 297.9 15 2 20KPA44A 20KPA44CA 44 49.10 5 72.7 277.9 2 2 20KPA48A 20KPA48CA 48 53.60 5 79.4 254.4 2 2 20KPA52A 20KPA52CA 52 58.10 5 85.8 235.4 2 2 20KPA56A 20KPA56CA 56 62.60 5 92.6 218.1 2 2 20KPA60A 20KPA60CA 60 67.00 5 97.6 207.0 2 2 20KPA64A 20KPA64CA 64 71.50 5 104.0 194.2 2 2 20KPA68A 20KPA68CA 68 76.00 5 110.0 183.6 2 2 20KPA72A 20KPA72CA 72 80.40 5 116.0 174.1 2 2 20KPA80A 20KPA80A 80 89.40 5 130.0 155.4 2 2 20KPA88A 20KPA88CA 88 98.30 5 142.0 142.3 2 2 20KPA96A 20KPA96CA 96 107.20 5 155.0 130.3 2 2 20KPA104A 20KPA104CA 104 116.20 5 168.0 120.2 2 2 20KPA112A 20KPA112CA 112 125.10 5 182.0 111.0 2 2 20KPA120A 20KPA120CA 120 134.00 5 194.0 104.1 2 2 20KPA132A 20KPA132CA 132 147.40 5 213.0 94.8 2 2 20KPA144A 20KPA144CA 144 160.80 5 232.0 87.1 2 2 20KPA160A 20KPA160CA 160 178.70 5 258.0 78.3 2 2 20KPA172A 20KPA172CA 172 192.10 5 277.0 72.9 2 2 20KPA180A 20KPA180CA 180 201.10 5 291.0 69.4 2 2 20KPA192A 20KPA192CA 192 214.50 5 309.0 65.4 2 2 20KPA204A 20KPA204CA 204 227.90 5 329.0 61.4 2 2 20KPA216A 20KPA216CA 216 241.30 5 348.0 58.0 2 2 20KPA232A 20KPA232CA 232 159.10 5 374.0 54.0 2 2 20KPA240A 20KPA240CA 240 268.10 5 387.0 52.2 2 2 20KPA256A 20KPA256CA 256 286.00 5 412.0 49.0 2 2 20KPA280A 20KPA280CA 280 312.80 5 451.0 44.8 2 2 20KPA300A 20KPA300CA 300 335.10 5 483.0 41.8 2 2 Note: 1. For Bi-Directional devices having V R of 40 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 30KPA Series 28 To 288 V 30000W Uni-directional Bi-directional u Glass passivated chip junction in P600 Package u Low leakage u Uni and Bidirectional unit u Excellent clamping capability u 30000W Peak power capability at 10 × 1000µs waveform Repetition rate (duty cycle):0.01% u Fast response time: typically less than 1.0ps from 0 Volts to VBR min u Typical I R less than 5μA above 12V. u High Temperature soldering: 260 °C/40 seconds at terminals u Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C× ΔT u Plastic package has Underwriters Laboratory Flammability 94V-0 u Matte tin lead –free Plated u Halogen free and RoHS compliant u Typical failure mode is short from over-specified voltage or current u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) u ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2) u EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4) R6/P600 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.340 0.360 8.64 9.14 C 0.048 0.052 1.22 1.32 D 0.340 0.360 8.64 9.14 Dimensions R6/P600 Cathode Band

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) 30KPA Series 28 To 288 V 30000W Part Number Breakdown Voltage VBR (V) @IT Uni Bi Reverse Stand-Off Voltage VRWM(V) MIN Test Current IT (mA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Reverse Leakage IR @VRWM (μA)30KPA28A 30KPA28CA 28 31.28 50 50.0 606.0 5000 30KPA30A 30KPA30CA 30 33.51 50 55.2 548.9 5000 30KPA33A 30KPA33CA 33 36.90 50 58.5 517.9 5000 30KPA36A 30KPA36CA 36 40.20 50 61.8 490.3 5000 30KPA39A 30KPA39CA 39 43.60 20 67.2 450.9 2000 30KPA42A 30KPA42CA 42 46.90 10 72.0 420.8 1000 30KPA43A 30KPA43CA 43 48.00 10 73.0 415.1 1000 30KPA45A 30KPA45CA 45 50.30 5 77.4 391.5 250 30KPA48A 30KPA48CA 48 53.60 5 81.6 371.3 150 30KPA51A 30KPA51CA 51 57.00 5 86.4 350.7 50 30KPA54A 30KPA54CA 54 60.30 5 91.4 331.5 20 30KPA58A 30KPA58CA 58 64.80 5 92.4 327.9 20 30KPA60A 30KPA60CA 60 67.00 5 102.0 297.1 15 30KPA64A 30KPA64CA 64 71.50 5 104.0 291.3 10 30KPA66A 30KPA66CA 66 73.70 5 107.0 283.2 2 30KPA70A 30KPA70CA 70 78.20 5 109.0 278.0 2 30KPA71A 30KPA71CA 71 79.30 5 111.5 271.7 2 30KPA72A 30KPA72CA 72 80.40 5 114.0 265.8 2 30KPA75A 30KPA75CA 75 83.80 5 119.4 253.8 2 30KPA78A 30KPA78CA 78 87.10 5 129.0 234.9 2 30KPA84A 30KPA84CA 84 93.80 5 139.2 217.7 2 30KPA90A 30KPA90CA 90 100.50 5 146.4 207.0 2 30KPA96A 30KPA96CA 96 107.20 5 156.0 194.2 2 30KPA102A 30KPA102CA 102 113.90 5 165.6 183.0 2 30KPA108A 30KPA108CA 108 120.60 5 175.2 172.9 2 30KPA120A 30KPA120CA 120 134.00 5 194.4 155.9 2 30KPA132A 30KPA132CA 132 147.40 5 213.0 142.3 2 30KPA144A 30KPA144CA 144 160.80 5 223.2 135.8 2 30KPA150A 30KPA150CA 150 167.60 5 233.4 129.8 2 30KPA156A 30KPA156CA 156 174.30 5 245.0 123.7 2 30KPA160A 30KPA160CA 160 178.70 5 252.6 120.0 2 30KPA168A 30KPA168CA 168 187.70 5 272.4 111.2 2 30KPA170A 30KPA170CA 170 189.90 5 275.0 110.2 2 30KPA180A 30KPA180CA 180 201.10 5 290.4 104.3 2 30KPA198A 30KPA198CA 198 221.20 5 319.8 94.7 2 30KPA216A 30KPA216CA 216 241.30 5 348.6 86.9 2 30KPA240A 30KPA240CA 240 268.10 5 387.0 78.3 2 30KPA258A 30KPA258CA 258 188.20 5 416.4 72.8 2 30KPA260A 30KPA260CA 260 290.40 5 416.0 72.8 2 30KPA270A 30KPA270CA 270 301.60 5 436.2 69.5 2 30KPA280A 30KPA280CA 280 312.80 5 464.0 65.3 2 30KPA288A 30KPA288CA 288 321.70 5 469.9 64.5 2 Note: 1. For Bi-Directional devices having V R of 40 volts and under, the IR limit is double Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Radial Lead Transient Voltage Suppressors (TVS) K Series 1KA To 10KA u Axial lead terminals u High current transient suppressor u Excellent Clamping Capability u Glass Passivated Junction u Bi-directional u Low Slope Resistance u Repetition Rate (duty cycle):0.01% u Hazardous Substances Free u RoHS Compliant u High Temperature soldering: 260 °C/10 seconds at terminals u Epoxy Encapsulated u Silver plated leads u Solderable per MIL-STD-202 Method 208 Dimensions Inches Millimeters A max 0.571 max 14.5 B Max0.500 max 12.7 C Φ0.051±0.004 Φ1.30±0.1 F max 0.10 max 2.5 Dimensions

www.socay.com Radial Lead Transient Voltage Suppressors (TVS) K Series 1KA To 15KA Reverse Stand-Off Voltage Breakdown Voltage Test Current Current Rating Maximum Energy Maximum Clamping Voltage Reverse Leakage Part Number VAC(V) VDC(V) VBR(V) MIN.@IT IT (mA) IPP 8/20μs (KA) 10/1000μs (A) VC(V) @IPP IR (μA) @VDC KA-012 8.5 12.8 14 1 3 500 28 20 KA-015 11 15 17 1 3 650 30 20 KA-020 14 20 22 1 3 800 40 20 KA-025 17 25 28 1 3 950 50 20 KA-030 21 30 33 1 3 1200 60 20 KA-042 30 42 47 1 3 1700 77 20 KA-058 40 58 64 1 3 2450 110 20 KA-066 45 66 70 1 3 2600 125 20 KA-076 54 76 85 1 3 2800 140 20 KA-100 72 100 110 1 3 4250 165 20 KA-133 100 133 147 1 3 5300 220 20 KA-170 130 170 180 1 3 7000 260 20 KA-190 145 190 200 1 3 8400 290 20 KA-200 150 200 222 1 3 8600 330 20 KA-240 180 240 250 1 3 9100 340 20 KB-012 8.5 12.8 14 1 6 1000 28 20 KB-015 11 15 17 1 6 1300 30 20 KB-020 14 20 22 1 6 1600 40 20 KB-025 17 25 28 1 6 1900 50 20 KB-030 21 30 33 1 6 2400 60 20 KB-042 30 42 47 1 6 3400 77 20 KB-058 40 58 64 1 6 4900 110 20 KB-066 45 66 70 1 6 5200 125 20 KB-076 54 76 83 1 6 5600 135 20 KB-100 72 100 110 1 6 8500 165 20 KB-133 100 133 147 1 6 10600 220 20 KB-170 130 170 180 1 6 14000 260 20 KB-190 145 190 200 1 6 16800 290 20 KB-200 150 200 222 1 6 17200 330 20 KB-240 180 240 250 1 6 18000 340 20 KB-275 210 275 300 1 6 19000 435 20 KB-300 230 300 330 1 6 25500 470 20 KB-380 275 380 401 1 6 30000 520 20 KC-012 8.5 12.8 14 1 10 1665 28 20 KC-015 11 15 17 1 10 2164 30 20 KC-020 14 20 22 1 10 2664 40 20 KC-025 17 25 28 1 10 3163 50 20 KC-030 21 30 33 1 10 3996 60 20 KC-042 30 42 47 1 10 5661 77 20 KC-058 40 58 64 1 10 8158 110 20 KC-066 45 66 70 1 10 8658 125 20 KC-076 54 76 83 1 10 9324 135 20 KC-100 72 100 110 1 10 14152 165 20 KC-133 100 133 147 1 10 17649 220 20 KC-170 130 170 180 1 10 23310 260 20 KC-190 145 190 200 1 10 27972 290 20 KC-200 150 200 222 1 10 28638 330 20 KD-012 8.5 12.8 14 1 15 2665 28 20 KD-015 11 15 17 1 15 3464 30 20 KD-020 14 20 22 1 15 4264 40 20 KD-025 17 25 28 1 15 5063 50 20 KD-030 21 30 33 1 15 6396 60 20 KD-042 30 42 47 1 15 9061 77 20 KD-058 40 58 64 1 15 13058 110 20 KD-066 45 66 70 1 15 13858 125 20 KD-076 54 76 85 1 15 14924 145 20 Electrical Characteristics (TA=25℃ unless otherwise noted)

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) SAC Series 5.0 To 50 V 500W Low Capacitance Uni-directional u Glass passivated chip u 500W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant DO204AC (DO-15) Inches Millimeters Dimensions Min Max Min Max A 0.077 0.087 1.960 2.200 B 0.171 0.191 4.350 4.850 C 0.130 0.155 3.300 3.940 D 0.084 0.096 2.130 2.440 Breakdown Voltage VBR @IT=1.0mA (V) Part Number Reverse Stand-Off Voltage VRWM (V) MIN Maximum Reverse Leakage IR @VRWM (μA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Junction Capacita nce @0V (pF) Working Inverse Blocking Voltage VWIB (V) Inverse Blocking Leakage Current IIB @VWIB (mA) Peak Inverse Voltage VPIB (V) SAC10 10.0 11.10 5 16.3 29.0 50 75 1 100 SAC12 12.0 13.30 5 19.0 25.0 50 75 1 100 SAC15 15.0 16.67 5 23.6 20.0 50 75 1 100 SAC18 18.0 20.00 5 28.8 15.0 50 75 1 100 SAC22 22.0 24.40 5 35.4 14.0 50 75 1 100 SAC26 26.0 28.90 5 42.3 11.1 50 75 1 100 SAC30 30.0 33.30 5 48.6 10.0 50 75 1 100 SAC36 36.0 40.00 5 60.0 8.6 50 75 1 100 SAC45 45.0 50.00 5 77.0 6.8 50 150 1 200 SAC50 50.0 55.50 5 88.0 5.8 50 150 1 200 Electrical Characteristics (TA=25℃ unless otherwise noted) Dimensions DO-204AC (DO-15) Cathode Band

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) LCE Series 6.5 To 90 V 1500W Low Capacitance Uni-directional Bi-directional u Glass passivated chip u 1500W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant DO-201 Inches Millimeters Dimensions Min Max Min Max A 1.000 - 25.40 - B 0.285 0.375 7.24 9.53 C 0.038 0.042 0.97 1.07 D 0.189 0.209 4.79 5.30 Dimensions

www.socay.com Axial Lead Transient Voltage Suppressors (TVS) LCE Series 6.5 To 90 V 1500W Low Capacitance Breakdown Voltage VBR @IT (V) Part Number Reverse Stand-Off Voltage VRWM (V) Min Max Test Current IT (mA) Maximum Reverse Leakage IR @VRWM (μA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Junction Capacitance @0V (pF) Working Inverse Blocking Voltage VWIB (V) Inverse Blocking Leakage Current IIB @VWIB (mA) Peak Inverse Voltage VPIB (V) LCE10 10.0 11.10 13.60 1 5 18.8 80 100 75 1 100 LCE10A 10.0 11.10 12.30 1 5 17.0 88 100 75 1 100 LCE11A 11.0 12.20 13.50 1 5 18.2 82 100 75 1 100 LCE12 12.0 13.30 16.30 1 5 22.0 68 100 75 1 100 LCE12A 12.0 13.30 14.70 1 5 19.9 75 100 75 1 100 LCE13 13.0 14.40 17.60 1 5 23.8 63 100 75 1 100 LCE13A 13.0 14.40 15.90 1 5 21.5 70 100 75 1 100 LCE14 14.0 15.60 19.10 1 5 25.8 58 100 75 1 100 LCE14A 14.0 15.60 17.20 1 5 23.2 65 100 75 1 100 LCE15 15.0 16.70 20.40 1 5 26.9 56 100 75 1 100 LCE15A 15.0 16.70 18.50 1 5 24.4 61 100 75 1 200 LCE16 16.0 17.80 21.80 1 5 28.8 52 100 75 1 200 LCE16A 16.0 17.80 19.70 1 5 26.0 57 100 75 1 200 LCE17 17.0 18.90 23.10 1 5 30.5 49 100 75 1 200 LCE17A 17.0 18.90 20.90 1 5 27.6 54 100 75 1 200 LCE18 18.0 20.00 24.40 1 5 32.2 46 100 75 1 200 LCE18A 18.0 20.00 22.10 1 5 29.2 51 100 75 1 200 LCE20 20.0 22.20 27.10 1 5 35.8 42 100 75 1 200 LCE20A 20.0 22.20 24.50 1 5 32.4 46 100 75 1 200 LCE22 22.0 24.40 29.80 1 5 39.4 38 100 75 1 200 LCE22A 22.0 24.40 26.90 1 5 35.5 42 100 75 1 200 LCE24 24.0 26.70 32.60 1 5 43.0 35 100 75 1 200 LCE24A 24.0 26.70 29.50 1 5 38.9 39 100 75 1 200 LCE26 26.0 28.90 35.30 1 5 46.6 32 100 75 1 200 LCE26A 26.0 28.90 31.90 1 5 42.1 36 100 75 1 200 LCE28 28.0 31.10 38.00 1 5 50.1 30 100 75 1 200 LCE28A 28.0 31.10 34.40 1 5 45.5 33 100 75 1 200 LCE30A 30.0 33.30 36.80 1 5 48.4 31 100 75 1 100 LCE33A 33.0 36.70 40.60 1 5 53.3 28 100 75 1 100 LCE36A 36.0 40.00 44.20 1 5 58.1 26 100 75 1 100 LCE40A 40.0 44.40 49.10 1 5 64.5 23 100 75 1 100 LCE43A 43.0 47.80 52.80 1 5 69.4 22 100 75 1 100 LCE45A 45.0 50.00 55.30 1 5 72.7 21 100 75 1 100 LCE48A 48.0 53.30 58.90 1 5 77.4 19 100 75 1 100 LCE51A 51.0 56.70 62.70 1 5 82.4 18 100 75 1 100 LCE54A 54.0 60.00 66.30 1 5 87.1 17 100 100 1 125 LCE58A 58.0 64.40 71.20 1 5 93.6 16 100 100 1 125 LCE60A 60.0 66.70 73.70 1 5 96.8 16 100 100 1 125 LCE64A 64.0 71.10 78.60 1 5 103.0 15 100 100 1 125 LCE70A 70.0 77.80 86.00 1 5 113.0 13 100 125 1 150 LCE75A 75.0 83.30 92.10 1 5 121.0 12 100 125 1 150 LCE85A 85.0 94.40 104.00 1 5 129.0 12 100 125 1 150 LCE90A 90.0 100.00 111.00 1 5 146.0 10 100 125 1 150 Electrical Characteristics (TA=25℃ unless otherwise noted)