SA16CA-E3 VISHAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor Revision: 18-Sep-12 1 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TRANSZORB® Transient Voltage Suppressors DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional types, use CA suffix (e.g. SA5.0CA, SA170CA). Electrical characteristics apply in both directions.

FEATURES

  • Glass passivated chip junction
  • Available in uni-directional and bi-directional
  • 500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
  • Excellent clamping capability
  • Very fast response time
  • Low incremental surge resistance
  • Solder dip 275 °C max. 10 s, per JESD 22-B106
  • AEC-Q101 qualified
  • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. MECHANICAL DATA Case: DO-204AC, molded epoxy over passivated chip Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, AEC-Q101 qualified Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum PRIMARY CHARACTERISTICS VWM 5.0 V to 170 V VBR (uni-directional) 6.4 V to 209 V VBR (bi-directional) 6.4 V to 209 V PPPM 500 W PD 3.0 W IFSM (uni-directional only) 70 A TJ max. 175 °C Polarity Uni-directional, bi-directional Package DO-204AC (DO-15) DO-204AC (DO-15) MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) P PPM 500 W Peak pulse current with a 10/1000 μs waveform (1) I PPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) P D 3.0 W Peak forward surge current 10 ms single half sine-wave uni-directional only I FSM 70 A Maximum instantaneous forward voltage at 100 A for uni-directional only (3) VF 3.5 V Operating junction and storage temperature range T J, TSTG - 55 to + 175 °C

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor Revision: 18-Sep-12 2 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Pulse test: t p  50 ms (2) Surge current waveform per fi g. 3 and derate per fig. 2 (3) For bi-direction al types with VWM of 10 V and less the ID limit is doubled (4) For the bi-directional SA5.0CA, the maximum V BR is 7.25 V (5) All terms and symbols are consistent with ANSI/EEE CA62.35 ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE TYPE BREAKDOWN VOLTAGE VBR AT IT (1) (V) TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT V WM (3) ID (μA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICENT AT VBR (%/°C)MIN. MAX. SA78A 86.7 95.8 1.0 78 1.0 4 126 95 SA85A 94.4 104 1.0 85 1.0 3.6 137 103 SA90A 100 111 1.0 90 1.0 3.4 146 110 SA100A 111 123 1.0 100 1.0 3.1 162 123 SA110A 122 135 1.0 110 1.0 2.8 177 133 SA120A 133 147 1.0 120 1.0 2.6 193 146 SA130A 144 159 1.0 130 1.0 2.4 209 158 SA150A 167 185 1.0 150 1.0 2.1 243 184 SA160A 178 197 1.0 160 1.0 1.9 259 196 SA170A 189 209 1.0 170 1.0 1.8 275 208

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor Revision: 18-Sep-12 3 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Fig. 1 - Peak Pulse Power Rating Curve Fig. 2 - Pulse Derating Curve Fig. 3 - Pulse Waveform Fig. 4 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only ORDERING INFORMATION (Example) PREFERRED PIN UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SA5.0A-E3/54 0.432 54 4000 13" di ameter paper tape and reel SA5.0AHE3/54 (1) 0.432 54 4000 13" diameter paper tape and reel 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0.1 1.0 PPPM - Peak Pulse Power (kW) td - Pulse Width td td td Current Waveforms Impulse Exponential Decay Half Sine Square PPK ”0.5” PPK PPK td = 7 tp Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 100 0 25 50 75 100 125 150 175 200 Peak P ulse P ower (P PP ) or C urrent (I PP Derating in Percentage, % TJ - Initial Temperature (°C) 100 IPPM - Peak P ulse C urrent, % I RSM t - Time (ms) 0 1.0 2.0 3.0 4.0 150 td tr = 10 µs Peak Value IPPM 10/1000 µs Waveform as defined by R.E.A. Half Value - IPPM IPP TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of I PPM 200 100 1 10 100 IFSM Peak For ward S urge C urrent (A) Number of Cycles at 60 Hz 8.3 ms Single Half Sine-Wave

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor Revision: 18-Sep-12 4 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 5 - Steady State Power Derating Curve Fig. 6 - Capacitance Fig. 7 - Incremental Clamping Voltage Curve Uni-Directional Fig. 8 - Incremental Clamping Voltage Curve Uni-Directional Fig. 9 - Incremental Clamping Voltage Curve Bi-Directional Fig. 10 - Incremental Clamping Voltage Curve Bi-Directional P D - Po wer Dissipation (W) TL - Lead Temperature (°C) 4.0 3.0 2.0 1.0 0 25 50 75 100 125 150 175 200 Lead Lengths 60 Hz Resistive or Inductive Load 10 000 1000 100 5 100 500 C J - Capaciatnce (pF) VWM - Reverse Stand-Off Voltage (V) Uni-Directional Bi-Directional VR = 0 VR = Rated Stand-Off voltage TJ = 25 °C f = 1.0 MHz V sig = 50 mVp-p IPP - Peak Pulse Current (A) 0.5 1 10 50 0.1 1.0 100 VC - Incremental Clamping Voltage SA170 SA110 SA70 SA54 SA40 SA30 SA24 SA18 SA15 SA12 SA5.0 SA9.0 Waveform: 8 x 20 Impulse DVC = VC - VBR IPP - Peak Pulse Current (A) 0.5 1 10 50 0.1 1.0 100 VC - Incremental Clamping Voltage SA170 SA110 SA70 SA40 SA24 SA15 SA5.0 SA9.0 Waveform: 10 x 1000 Impulse DVC = VC - VBR IPP - Peak Pulse Current (A) 0.5 1 10 50 0.1 1.0 100 VC - Incremental Clamping Voltage SA170 SA110 SA70 SA30 SA40 SA60 SA24 SA15 SA9.0 SA6.5 Waveform: 8 x 20 Impulse DVC = VC - VBR IPP - Peak Pulse Current (A) 0.5 1 10 50 0.1 1.0 100 VC - Incremental Clamping Voltage SA170 SA110 SA70 SA40 SA24 SA15 SA9.0 SA6.5 Waveform: 10 x 1000 Impulse DVC = VC - VBR

SA5.0A thru SA170CA www.vishay.com Vishay General Semiconductor Revision: 18-Sep-12 5 Document Number: 88378 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Fig. 11 - Typical Instantaneous Forward Voltage Fig. 12 - Breakdown Voltage Temperature Coefficient Curve PACKAGE OUTLINE DIMENSIONS in inches (millimeters) VF - Forward Voltage (V) 0.5 1 1.5 2.5 0.1 100 IF - Forward Current (A) Uni-Directional Only 0.2 0 2 TJ = 25 °C Pulse Width = 300 µs 1 % Duty Cycle VWM - Rated Stand-Off Voltage (V) V - Temperature Coefficient (mV/°C) 5.0 10 100 500 1.0 100 200 Uni-Directional Bi-Directional DO-204AC (DO-15) 0.034 (0.86) 0.028 (0.71) DIA. 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 1.0 (25.4) MIN.

www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.