SA50A ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

  • Working Peak Reverse V oltage Range − 5.0 to 170 V
  • Peak Power − 500 Watts @ 1.0 ms
  • ESD Rating of Class 3 (>16 kV) per Human Body Model
  • Maximum Clamp V oltage @ Peak Pulse Current
  • Low Leakage < 1 /C0109A above 8.5 V
  • UL 497B for Isolated Loop Circuit Protection
  • Maximum Temperature Coefficient Specified
  • Response Time is typically < 1.0 ns
  • Pb−Free Packages are Available* Mechanical Characteristics: CASE: V oid-free, Transfer-molded, Thermosetting Plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable MAXIMUM LEAD TEMPERATURE FOR SOLDERING: 230°C, 1/16 in. from the case for 10 seconds POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. MARKING DIAGRAM http://onsemi.com AXIAL LEAD CASE 59AA PLASTIC Cathode Anode A = Assembly Location SAxxxA = Device Number xxx = (See Table Page 3) YY = Year WW = Work Week /C0071= Pb−Free Package (Note: Microdot may be in either location A SAxxxA YYWW/C0071 /C0071 Device Package Shipping †

ORDERING INFORMATION

SAxxxA Axial Lead 1000 Units / Box SAxxxAG Axial Lead (Pb−Free)

1000 Units / Box

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. SAxxxARL* Axial Lead 5000 / Tape & Reel SAxxxARLG* Axial Lead (Pb−Free) 5000 / Tape & Reel SAxxxALF Axial Lead 2000 Units / Box SAxxxALFG Axial Lead (Pb−Free)

2000 Units / Box

*SA8.0A, SA130A, and SA160A Not Available in 5000/ Reel. ** Lead formed device.

SA5.0A Series http://onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Peak Power Dissipation (Note 1) @ TL ≤ 25°C PPK 500 W Steady State Power Dissipation @ TL ≤ 75°C, Lead Length = 3/8 in Derated above TL = 75°C PD 3.0 W mW/°C Thermal Resistance, Junction−to−Lead R/C0113JL 33.3 °C/W Forward Surge Current (Note 2) @ TA = 25°C IFSM 70 A Operating and Storage T emperature Range TJ, Tstg − 55 to +175 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above t he Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. Nonrepetitive current pulse per Figure 4 and derated above T A = 25°C per Figure 2. 2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 35 A) Symbol Parameter IPP Maximum Reverse Peak Pulse Current VC Clamping Voltage @ IPP VRWM Working Peak Reverse Voltage IR Maximum Reverse Leakage Current @ VRWM VBR Breakdown Voltage @ IT IT Test Current /C0081VBR Maximum Temperature Variation of VBR IF Forward Current VF Forward Voltage @ IF Uni−Directional TVS IPP IF V I IRIT VRWMVC VBR VF

SA5.0A Series http://onsemi.com ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 6) = 35 A) Device* Device Marking VRWM (Note 3) IR @ VRWM Breakdown Voltage VC @ IPP (Note 5) /C0081VBRVBR (Note 4) (Volts) @ IT VC IPP Volts /C0109A Min Nom Max mA Volts A mV/°C SA10A, G SA10A 10 1 11.1 11.7 12.3 1 17 29.4 10 SA12A, G SA12A 12 1 13.3 14 14.7 1 19.9 25.1 12 SA16A, G SA16A 16 1 17.8 18.75 19.7 1 26 19.2 17 SA18A, G SA18A 18 1 20 21.05 22.1 1 29.2 17.2 20 SA28A, G SA28A 28 1 31.1 32.75 34.4 1 45.4 11 31 SA36A, G SA36A 36 1 40 42.1 44.2 1 58.1 8.6 41 SA45A, G SA45A 45 1 50 52.65 55.3 1 72.7 6.9 52 SA64A, G SA64A 64 1 71.1 74.85 78.6 1 103 4.9 76 SA64ALF, G SA64A 64 1 71.1 74.85 78.6 1 103 4.9 76 SA70A, G SA70A 70 1 77.8 81.9 86 1 113 4.4 85 SA78A, G SA78A 78 1 86.7 91.25 95.8 1 126 4.0 95 SA90A, G SA90A 90 1 100 105.5 111 1 146 3.4 110 SA100A, G SA100A 100 1 111 117 123 1 162 3.1 123 SA110A, G SA110A 110 1 122 128.5 135 1 177 2.8 133 SA120A, G SA120A 120 1 133 140 147 1 193 2.5 146 SA130A, G† SA130A 130 1 144 151.5 159 1 209 2.4 158 SA150A, G SA150A 150 1 167 176 185 1 243 2.1 184 SA160A, G† SA160A 160 1 178 187.5 197 1 259 1.9 196 SA170A, G SA170A 170 1 189 199 209 1 275 1.8 208 NOTE: Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. 3. MiniMOSORB /C0116 transients suppressor is normally selected according to the maximum working peak reverse voltage (V RWM), which should be equal to or greater than the dc or continuous peak operating voltage level. 4. V BR measured at pulse test current IT at an ambient temperature of 25°C. 5. Surge current waveform per Figure 4 and derate per Figures 1 and 2. 6. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute *The “G’’ suffix indicates Pb−Free package available. †Not Available in the 5000/Tape & Reel.

SA5.0A Series http://onsemi.com UL RECOGNITION* The entire series including the bidirectional CA suffix has Underwriters Laboratory Recognition for the classification of protectors (QVGV2) under the UL standard for safety 497B and File #E 116110. Many competitors only have one or two devices recognized or have recognition in a non-protective category. Some competitors have no recognition at all. With the UL497B recognition, our parts successfully passed several tests including Strike V oltage Breakdown test, Endurance Conditioning, Temperature test, Dielectric V oltage-Withstand test, Discharge test and several more. Whereas, some competitors have only passed a flammability test for the package material, we have been recognized for much more to be included in their protector category. *Applies to SA5.0A, CA − SA170A, CA.

SA5.0A Series http://onsemi.com PACKAGE DIMENSIONS AXIAL LEAD CASE 59AA−01 ISSUE O (Similar to DO−204AC or DO−15) K A DK B DIM MIN MAX MIN MAX MILLIMETERSINCHES A 5.80 7.600.228 0.299 B 2.60 3.600.102 0.142 D 0.71 0.860.028 0.034 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY. 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. 6. REPLACES CASE 59−09. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. SA5.0A/D MiniMOSORB and Surmetic are trademarks of Semiconductor Components Industries, LLC. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative