SA FORMOSA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

3~4 List Page 1 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Formosa MS Transient Voltage Suppressor SA SERIES Document ID Issued Date Revised Date Revision Page. DS-222807 2008/02/10 2010/03/10 B 7 深圳FMS Kinter 131 6803 0058

Features

Axial lead type devices for through hole design. 500W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle): 0.01%. Excellent clamping capability. Low incremental surge resistance. Fast response time from 0V to V , typically less thanBR 1 ps for uni-directional & 5 ns for bi-directional types. Glass passivated chip junction. Lead-free parts meet environmental standards of MIL-STD-19500 /228

  • Suffix "-H" indicates Halogen free parts, ex. SΑ5.0Α-H Package outline Page 2 Formosa MS Maximum ratings (AT T =25A o C unless otherwise noted) PARAMETER CONDITIONS Peak power dissipation Peak pulse current Steady state power dissipation Peak forward surge current Maximum instantaneours forward voltage with a 10/1000us waveform, Note 1 & Fig. 1 with a 10/1000us waveform Symbol SA SERIES UNIT PPPM IPPM PM(AV) VF W A A V 500 See table 1 3.0at T =75°C lead length 0.375” (9.5 mm)L 8.3ms single half sine-wave superimposed on rated load (JEDEC Method), note 2 70IFSM Storage temperature TSTG O C-65~+175 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 500W Axial Leaded Transient Voltage Suppressors - 5.0V-220V Transient Voltage Suppressor W O Note1. Non-repetitive current pulse, per Fig. 3 and derated above T =25 C per Fig. 2A 2. Measured on 8.3 mS single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum Operating temperature TJ O C-55~+150 SA SERIES Dimensions in inches and (millimeters) DO-15 1.0(25.4) MIN. 1.0(25.4) MIN. .300(7.6) .230(5.8) .034(.9) .028(.7) DIA. .140(3.6) .104(2.6) DIA. Mechanical data
  • Case : Molded plastic, DO-15
  • Lead : Axial leads, solderable per MIL-STD-202, Method 208 guaranteed
  • Polarity: Color band denotes cathode end
  • Mounting Position : Any
  • Weight : Approximated 0.40 gram Epoxy : UL94-V0 rated flame retardant at 25A for uni-directional types only, note 3 3.5/5.0 Document ID Issued Date Revised Date Revision Page. DS-222807 2008/02/10 2010/03/10 B 7 深圳FMS Kinter 131 6803 0058

O Absolute Maximum Rating(T = 25 C)A mA IT Volts Max. VC@IPPM Volts I (A)PPM 9.83 7.98 10.4 11.1 8.60 9.21 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 44.7 41.7 38.8 36.7 34.7 32.5 29.4 27.4 25.1 23.2 21.5 20.6 19.2 18.1 17.2 15.4 14.4 12.8 11.9 11.0 10.3 9.4 8.6 7.8 7.2 6.9 Part No. SA6.5(C)A SA7.0(C)A 7.00 10 9.2 54.3SA5.0(C)A 7.37 10 10.3 48.5SA6.0(C)A o Electrical characteristics (at T =25 C unless otherwise noted) Table 1A VoltsVolts VBR MaxVBR MinVRWM IFSM 8.89 7.22 9.44 10.0 7.78 8.33 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 6.40 6.67 8.0 6.5 8.5 9.0 7.0 10.0 7.5 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 5.0 6.0 (A)@8.3ms SA8.5(C)A SA9.0(C)A SA7.5(C)A SA8.0(C)A SA11(C)A SA12(C)A SA10(C)A SA15(C)A SA16(C)A SA13(C)A SA14(C)A SA20(C)A SA22(C)A SA17(C)A SA18(C)A SA28(C)A SA30(C)A SA24(C)A SA26(C)A SA40(C)A SA43(C)A SA33(C)A SA36(C)A SA45(C)A O Electricity Characteristics(T = 25 C)A 600 600 400 150 58.9 62.7 66.3 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 6.5 6.1 5.7 5.3 5.2 4.9 4.4 4.1 4.0 71.2 73.7 78.6 92.1 95.8 86.0 53.3 56.7 60.0 64.4 66.7 71.1 83.3 86.7 77.8 48.0 51.0 54.0 58.0 60.0 64.0 75.0 78.0 70.0 SA51(C)A SA54(C)A SA48(C)A SA64(C)A SA70(C)A SA58(C)A SA60(C)A SA75(C)A SA78(C)A Page 3 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Note 1. V measured after I applied for 300us, I =square wave pulse or equivalentBR T T 2. Surge current waveform per Fig. 3 and derated per Fig. 2 3. For bi-directional types having V of 10 volts and less, the I limit is doubledRWM R 4. Suffix ‘C’ denotes bi-directional devices. Suffix ‘A’ denotes 5% tolerance devices, no suffix denotes 10% tolerance devices. 5. All terms and symbols are consistent with ANS/IEEE C62.35 1.0 1.0 1.0 1.0 1.0 137.0 146 162 177 193 3.6 3.4 3.1 2.8 2.0 104.0 111.0 135.0 147.0 123.0 94.4 100.0 122.0 133.0 111.0 85.0 90.0 110.0 120.0 100.0 SA90(C)A SA100(C)A SA85(C)A SA110(C)A SA120(C)A 12.311.1 Document ID Issued Date Revised Date Revision Page. DS-222807 2008/02/10 2010/03/10 B 7 Max. I @VR RWM 深圳FMS Kinter 131 6803 0058

http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 O Absolute Maximum Rating(T = 25 C)A mA IT Volts Max. VC@IPPM Volts I (A)PPM 233 197 247 263 209 222 1.0 1.0 1.0 1.0 1.0 1.0 259 275 292 308 324 340 1.9 1.8 1.7 1.6 1.5 1.5 Part No. SA160(C)A SA170(C)A 159 1.0 209 2.4SA130(C)A 185 1.0 243 2.1SA150(C)A o Electrical characteristics (at T =25 C unless otherwise noted) Table 1A VoltsVolts VBR MaxVBR MinVRWM IFSM 211 178 224 237 189 201 144 167 190 160 200 210 170 180 130 150 (A)@8.3ms SA200(C)A SA210(C)A SA180(C)A SA190(C)A O Electricity Characteristics(T = 25 C)A Note 1. V measured after I applied for 300us, I =square wave pulse or equivalentBR T T 2. Surge current waveform per Fig. 3 and derated per Fig. 2 3. For bi-directional types having V of 10 volts and less, the I limit is doubledRWM R 4. Suffix ‘C’ denotes bi-directional devices. Suffix ‘A’ denotes 5% tolerance devices, no suffix denotes 10% tolerance devices. 5. All terms and symbols are consistent with ANS/IEEE C62.35 Fig. A - Transients of several thousand volts can be clamped to a safe level by the TVS +30V +20V +12V Transient Peak IC Failure Threshold TVS Clamping Voltage (VC) Normal Operating Voltage Fig. B - Transient current is divered to ground thru TVS; the voltage seen by the protected load is limited to the clamping voltage level Transient Voltage Clamping Transient Protected Load TVS Transient Current Formosa MS Transient Voltage Suppressor SA SERIES 272 1.0 356 1.4246220 70SA220(C)A 3 Document ID Issued Date Revised Date Revision Page. DS-222807 2008/02/10 2010/03/10 B 7 Max. I @VR RWM 深圳FMS Kinter 131 6803 0058

Rating and characteristic curves (SA SERIES) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 0.1u 1.0u 10u 100u 1.0m 10m 100 1.0 0.1 0 25 50 75 100 125 150 175 200 100 FIG.1 - PEALK PULSE POWER RATING CURVE PEAK PULSE POWER, P (KW)PPM FIG.2 - PULSE DERATING CURVE PULSE WIDTH, td ( sec) AMBIENT TEMPERATURE, T (°C)A PEAK PULSE POWER OR CURRENT DERATING IN PERCENTAGE, % td tr=10us half value I /2PPM 10/1000 us waveform peak value IPPM pulse width (td) is defined as the point where the peak current decays to 50% 0 1.0 2.0 3.0 4.0 150 100 FIG.3 - PULSE WAVEFORM PEAK PULSE CURRENT, I (%)PPM TIME, t (ms) FIG.4 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, C (pF)J FIG.5 - STEADY STATE POWER DERATING CURVE LEAD TEMPERATURE, T (°C)L STEADY STATE POWER DISSIPATION (W) FIG.6 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT NUMBER OF CYCLES AT 60HZ PEAK FORWARD SURGE CURRENT, I (A)FSM BREAKDOWN VOLTAGE, V (V)BR pulse width (td) is defined as the point where the peak current decays to 50% Document ID Issued Date Revised Date Revision Page. 1 10 100 0.5 1.5 2.5 3.5 0 25 50 75 100 125 150 175 200 L = 0.375” (9.5mm) Lead Lengths 100 1000 10000 1.0 10.0 100.0 1000.0 Tj=25°C f=1.0MHz Vsig=50mVp-p Uni-directional VR=0V Bi-directional VR=0V Uni-directional @ VRWM Bi-directional @ VRWM DS-222807 2008/02/10 2010/03/10 B 7 深圳FMS Kinter 131 6803 0058

http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 1 2 Uni-Directional Pin1 cathode Pin2 anode Pin Simplified outline Symbol Bi-Directional Formosa MS Transient Voltage Suppressor SA SERIES Document ID Issued Date Revised Date Revision Page. DS-222807 2008/02/10 2010/03/10 B 7 Suggested thermal profiles for soldering processes Temperature(°C) 1.Lead free temperature profile wave-soldering 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) 100 120 140 160 180 200 220 240 260 280 Preheat Max gradient 2ºC/s Peak Max well time 5 Max Cool Down Max gradient-4ºC/s Suggested gradient 2ºC/s or less Peak soldering temperature not to exceed 260ºC 深圳FMS Kinter 131 6803 0058

http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Issued Date Revised Date Revision Page. Formosa MS Transient Voltage Suppressor SA SERIES High reliability test capabilities 1. Solder Resistance 2. Solderability 3. Pull Test 4. Bend Lead 5. High Temperature Reverse Bias 8. Pressure Cooker 7. Temperature Cycling 8. Thermal Shock 9. Humidity 10. High Temperature Storage Life at 260±5 for 10±2sec. immerse body into solder 1/16"±1/32" o at 245±5 C for 5 sec. 1.0kg in axial lead direction for 10 sec. 1.0kg weight applied to each lead bending o o arc 90 ±5 for 3 times. o V =80% rate at T =150 C for 168 hrs.RWM J o 15P at T =121 C for 4 hrs.SIG A o o -55 C to +125 C dwelled for 30 min. and transferred for 5min. total 10 cycles. o o 0 C for 5 min. rise to 100 C for 5 min. total 10 cycles. o at T =85 C, RH=85% for 1000hrs.A o at 175 C for 1000 hrs. o C MIL-STD-750D METHOD-2031 MIL-STD-202F METHOD-208 MIL-STD-750D METHOD-2036 MIL-STD-750D METHOD-2036 MIL-STD-750D METHOD-1038 JESD22-A102 MIL-STD-750D METHOD-1051 MIL-STD-750D METHOD-1056 MIL-STD-750D METHOD-1021 MIL-STD-750D METHOD-1031 Item Test Conditions Reference DS-222807 2008/02/10 2010/03/10 B 7 深圳FMS Kinter 131 6803 0058