SA24A

SA5.0 DAESAN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

• Plastic package has Underwriters Laboratory flammability classification 94V-0
• Glass passivated junction
• 500W peak pulse power surge capability with a 10/100¥ìS waveform, repetition rate(duty cycle) : 0.01%
• Excellent clamping capability
• Low incremental surge resistance
• Very fast response time
• High temperature soldering guaranteed : 265¡É/10 seconds, 0.375"(9.5mm) lead length, 5lbs. (2.3Kg) tension Devices For Bidirectional Applications Maximum Ratings And Electrical Characteristics
• For bi-directional use C or CA suffix. (e.g. SA5.0C, SA170CA) Electrical characteristics apply in both directions.
• Case : JEDEC DO-15 molded plastic body over passivated junction
• Terminals : Solder plated axial leads, solderable per MIL-STD-750, method 2026
• Polarity : For uni-directional types the color band denotes cathode, which is positive with respect to the anode under normal TVS operation
• Mounting Position : Any
• Weight : 0.014 ounce, 0.40 gram Peak power dissipation with a 10/1000¥ìS waveform (Note 1. Fig. 1) Peak pulse current with a 10/1000¥ìS waveform (Note 1) Steady state power dissipation at TA=75¡É lead length 0.375"(9.5mm) (Note2) VoltsMaximum instantaneous forward voltage at 35A for unidirectional only PM(AV) Peak forward surge current, 10mm single half sine-wave unidirectional only Operating junction and storage temperature range PPPM 500 (MIN.) Watts Symbols Values Units 3.5VF IPPM See next table Amps 3.0 IFSM TJ,TSTG -55 to +175 ¡É Watts Amps (Ratings at 25¡É ambient temperature unless otherwise specified) Notes: (1) Non repetitive current pulse, per Fig.3 and derated above TA=25¡É per Fig.2 (2) Mounted on copper pads area of 1.6¡¿1.6"(40¡¿40mm) per Fig.5 (3) 8.3ms single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum. POWER 500Watts VOLTAGE 5.0 to 170 Volts Dimensions in inches and (millimeters) DO-15 1.0(25.4) MIN. 1.0(25.4) MIN. 0.300(7.6) 0.230(5.8) 0.034(0.9) 0.028(0.7) DIA. 0.140(3.6) 0.104(2.6) DIA.

ELECTRICAL CHARACTERISTIC at (TA=25¡É unless other specified) B reakdown Voltage Maximum Maximum Maximum Maximum V (B R ) at I T (1) Tes t S tand-off R evers e Peak P uls e C lamping Temperature (V ) C urrent Voltage L eakage C urrent Voltage at C oeffic ientIT V WM at V WM IP P M(2) IP P M of V (B R ) Devic e Type MIN MA X (mA ) (V ) ID (3) (µA ) (A ) V C (V ) (mV / o C )

ELECTRICAL CHARACTERISTIC at (TA=25¡É unless other specified) B reakdown Voltage Maximum Maximum Maximum Maximum V (B R ) at IT (1) Tes t S tand-off R evers e Peak P uls e C lamping Temperature (V ) C urrent Voltage L eakage C urrent Voltage at C oeffic ientIT V WM at V WM IP P M(2) IP P M of V (B R ) Devic e Type MIN MA X (mA ) (V ) ID (3) (µA ) (A ) V C (V ) (mV / o C ) S A90 (C ) 100 122 1.0 90.0 1.0 3.1 160 121 S A90 (C )A 100 111 1.0 90.0 1.0 3.4 146 110 S A100 (C ) 111 136 1.0 100 1.0 2.8 179 135 S A100 (C )A 111 123 1.0 100 1.0 3.1 162 123 S A110 (C ) 122 149 1.0 110 1.0 2.6 196 148 S A110 (C )A 122 135 1.0 110 1.0 2.8 177 133 S A120 (C ) 133 163 1.0 120 1.0 2.3 214 162 S A120 (C )A 133 147 1.0 120 1.0 2.6 193 146 S A130 (C ) 144 176 1.0 130 1.0 2.2 230 175 S A130 (C )A 144 159 1.0 130 1.0 2.4 209 158 S A150 (C ) 167 204 1.0 150 1.0 1.9 268 203 S A150 (C )A 167 185 1.0 150 1.0 2.1 243 184 S A160 (C ) 178 218 1.0 160 1.0 1.7 257 217 S A160 (C )A 178 197 1.0 160 1.0 1.9 259 196 S A170 (C ) 189 231 1.0 170 1.0 1.6 304 230 S A170 (C )A 189 209 1.0 170 1.0 1.8 275 208 Notes : (1) P ulse test: tp = 50ms (2) S urge current waveform per F ig. 3 and derate per F ig. 2 (3) For bidirectional types with V WM of 10 Volts and less, the ID limit is doubled (4) For the bidirectional S A5.0C A, the maximum V B R is 7.25V (5) All terms and symbols are consistent with ANS I/IE E E C 62.35

RATINGS AND CHARACTERISTIC CURVES SA5.0 THRU SA170CA 0 50 100 150 200 100 25 75 125 175 0 50 100 150 200 1.0 2.0 3.0 4.0 7525 125 175 1 10 100 100 200 5 100 500 100 1,000 10,000 0.1¥ìs 1.0¥ìs 10¥ìs 100¥ìs 1.0ms 10ms 0.1 1.0 F ig. 1 Ð P eak P uls e P ower R ating C urve P P P M , P eak P ulse P ower (kW) Non-repetitive P ulse Waveform shown in F ig. 3 T A = 25oC td , P ulse Width P eak P ulse P ower (P P P ) or C urrent (IP P ) Derating in P ercentage, % T A , Ambient Temperature (oC ) Fig. 2 Ð P uls e Derating C urve F ig. 4 - Maximum Non-R epetitive F orwar d S urge C urrent Uni-Direc tional Onl y IF S M , P eak F orward S urge C urrent (A) Number of C ycles at 60 Hz 8.3ms S ingle Half S ine-Wave (J E DE C Method) P M(AV), S teady S tate P ower Dissipation (W) F ig. 5 Ð S teady S tate P ower Derating C ur ve T L , Lead Temperature (oC ) L = 0.375" (9.5mm) Lead Lengths 1.6 x 1.6 x .040" (40 x 40 x 1mm) C opper Heat S inks C J , C apacitance (pF ) VWM , R everse S tand-off Voltage (V ) Fig. 6 Ð C apacitance V R = 0 V R = R ated S tand-off voltage Unidirectional B idirectional td td td C urrent Waveforms Impulse E xponential Decay Half S ine S quare P P K ".5" P P K P P K td = 7 tp 100 150 IP P M , P eak P ulse C urrent, % IR S M Fig. 3 Ð P uls e Waveform T J = 25 o C P ulse Width (td) is defined as the point where the peak current decays to 50% of IP P M tr = 10¥ìs P eak Value IP P M Half Value IP P IP P M 2 td 10/1000¥ìs W aveform as defined by R .E .A. 0 1.0 2.0 3.0 4.0 t , Time (ms) T J = 25 o C f = 1MHZ V sig = 50mV p-p

RATINGS AND CHARACTERISTIC CURVES SA5.0 THRU SA170CA 0.5 1 10 50 0.1 1.0 100 0.5 1 10 50 0.1 1.0 100 0.5 1 10 50 0.1 1.0 100 0.5 1 10 50 0.1 1.0 100 F ig. 7 Ð Incremental C lamping Voltage C urve Unidirectional F ig. 8 Ð Incremental C lamping Voltage C urve Unidirectional F ig. 9 Ð Incremental C lamping Voltage C urve B idirectional F ig. 10 Ð Incremental C lamping Voltage C urve B idirectional Waveform: 8 x 20 Impulse V C = V C - V (B R ) Waveform: 8 x 20 Impulse V C = V C - V (B R ) Waveform: 10 x 1000 Impulse V C = V C - V (B R ) Waveform: 10 x 1000 Impulse V C = V C - V (B R ) VC , Incremental C lamping Voltage VC , Incremental C lamping Voltage IP P, Peak P ulse C urrent (A) IP P, Peak P ulse C urrent (A) VC , Incremental C lamping Voltage IP P, Peak P ulse C urrent (A) VC , Incremental C lamping Voltage IP P, Peak P ulse C urrent (A) S A170 S A110 S A170 S A110 S A70 S A40 S A24 S A15 S A70 S A54 S A40 S A30 S A24 S A18 S A15 S A12 S A5.0 S A5.0 S A9.0 S A170 S A110 S A70 S A30 S A40 S A60 S A24 S A15 S A9.0 S A6.5 S A170 S A110 S A70 S A40 S A24 S A15 S A9.0 S A6.5 S A9.0

RATINGS AND CHARACTERISTIC CURVES SA5.0 THRU SA170CA 5.0 10 100 500 1.0 100 200 0 0.5 1 1.5 2 2.5 0.1 0.2 100 IF Forward C urrent (A) V, Temperature C oefficient (mV/oC ) F ig. 11 Ð T ypical Ins tantaneous F orward V oltage F ig. 12 Ð B reakdown Voltage Temperature C oefficient C ur ve V F , Forward Voltage (V ) V WM, R ated S tand-Off Voltage (V ) TJ = 25oC P ulse Width = 300¥ìs 1% Duty C ycle Unidirectional (only) Unidirectional B idirectional