SA2321-G AUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • 2.8mm(L)×1.2mm(W) small size surface mount type
  • Thin package of 0.8mm(H) thickness
  • Transparency SMD side view type
  • Wide viewing angle : 110O O u t l i n e D i m e n s i o n s u n i t : mm 0.70~0.90 1.10~1.30 2.33~2.53 0.4 Typ. 0.50~0.60 2.40~2.60 1.40 Typ. 2.33~2.53 <A-A' > A'A <B-B' > B PIN Connections 1. Anode 2. Cathode SSeemmiiccoonndduuccttoorr

( T a = 2 5 ℃) Characteristic Symbol Rating Unit Power dissipation P D 60 mW Forward current I F 25 mA *1Peak forward current I FP 50 mA Reverse voltage V R 4 V Operating temperature range T opr -30 85 ∼ ℃ Storage temperature range T stg -40 100 ∼ ℃ *2Soldering temperature T sol 240 for 10 seconds ℃ *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended reflow soldering temperature profile - Preheating 150℃ to 185℃ within 120 seconds soldering 240℃ within 10 seconds Gradual cooling (Avoid quenching) Electrical / Optical Characteristics ( T a = 2 5 ℃) Characteristic Symbol Test Condition Min Typ Max Unit Forward voltage V F I F= 20mA - 2.15 2.5 V *3Luminous intensity IV IF= 20mA 230 - 520 mcd Dominant wavelength λD IF= 20mA 617 621 627 nm Spectrum bandwidth ∆λ IF= 20mA - 35 - nm *4Half angle θ1/2 IF= 20mA ±55 deg max. 10sec Temp (℃) Time (sec) 185 150 240 Peak Temp max. 240℃ Preheating area 150~185℃, 90±30sec max. 3℃/sec 25 Time from 25℃ to Peak Temperature max. 6min Solder area 220℃, max. 60sec max. 4℃/sec max. -6℃/sec 240 180 150 60 0

*3. Luminous intensity maximum tolerance for each grade classification limit is ±18% (The test result of I F=20mA is only for reference) *4. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity

  • IV / λD Grade Classification (Ta=25℃) Test Condition @ IF = 20mA Luminous Intensity [mcd] Dominant Wavelength [nm] N : 230~350 a : 617~621 O : 350~520 b : 621~627

Fig.4 Spectrum Distribution Fig. 3 IF – Ta Fig. 2 IV - IF Fig. 1 IF - VF Electrical Characteristic Curves Forward Current I F [mA] Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Forward Voltage VF [V] Forward Current I F [mA] Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 5-1 Radiation Diagram(X) Relative Luminous Intensity Iv [%]

The AUK Corp. products are intended for the use as components in general electronic equipment (Office and co mmunication equipment, m easuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to th e welfare of human life(atomi c energy control, airplane, spaceship, transportation, co mbustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equi pments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.