S8016NRP LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series Sxx15x & Sxx16x Series

Description

Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1 .5V potential. Features & Benefits

  • RoHS compliant
  • Glass – passivated junctions
  • Voltage capability up to 1000 V
  • Surge capability up to 225 A Main Features Symbol Value Unit IT(RMS) 15 & 16 A VDRM/VRRM 400 to 1000 V IGT 30 mA Schematic Symbol Agency Approval Agency Agency File Number ® L Package: E71639 Absolute Maximum Ratings — Standard SCRs Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current Sxx15L TC = 90°C 15 ASxx16R Sxx16N TC = 110°C 16 IT(AV) Average on-state current Sxx15L TC = 90°C 9.5 ASxx16R Sxx16N TC = 110°C 10.0 ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 188 A single half cycle; f = 60Hz; TJ (initial) = 25°C 225 I2t I2t Value for fusing tp = 8.3 ms 210 A2s di/dt Critical rate of rise of on-state current f = 60 Hz ; TJ = 125°C 125 A/μs IGM Peak gate current TJ = 125°C 3 A PG(AV) Average gate power dissipation TJ = 125°C 0.6 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage

Applications

Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.AK G

Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions Value UnitSxx15x Sxx16x IGT VD = 12V; RL = 60 Ω MAX. 30 mA MIN. 1 VGT MAX. 1. 5 V dv/dt VD = VDRM; gate open; TJ = 100°C 400V MIN. 450 V/μs 600V 425 800V 400 1000V 200 VD = VDRM; gate open; TJ = 125°C 400V 350 600V 325 800V 300 VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C MIN. 0.2 V IH IT = 200mA (initial) MAX. 40 mA tq IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 35 μs tgt IG = 2 x IGT PW = 15µs IT = 12A TYP . 2 μs Note: xx = voltage, x = package (1) IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs Static Characteristics Symbol Test Conditions Value Unit VTM 15A Device IT = 30A; tp = 380 µs MAX. 1. 6 V 16A Device IT = 32A; tp = 380 µs IDRM / IRRM VDRM = VRRM TJ = 25°C 400 - 600V MAX. μA 800 - 1000V 20 TJ = 100°C 400 - 600V 500 800V 1000 1000V 3000 TJ = 125°C 400 - 600V 1000 800V 2000 Thermal Resistances Symbol Parameter Value Unit Rθ(J-C) Junction to case (AC) Sxx16R/ Sxx16N 1. 1 °C/W Sxx15L 2.5 Rθ(J-A) Junction to ambient Sxx16R 40 °C/W Sxx15L 50 Note: xx = voltage

Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series 100 1000 11 01 00 1000 Sxx16R Sxx16N Sxx15L Peak Surge (Non-repetitive) On-state Current (I TSM) – Amps Surge Current Duration -- Full Cycles Figure 12: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwell- time at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 K J A H G B F E C D L R TC MEASURING POINT ANODE O P N M .276 7.01 .526 13.36 .320 8.13 AREA (REF.) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB GATECATHODE ANODE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series Dimensions — TO- 263AA (N-package) — D2-Pak Surface Mount G B A W D F V S CATHODE ANODE TC MEASURING POINT C E K H J U .320 8.13 .276 7.01 .331 8.41 GATE .460 11.68 .665 16.89 .260 6.60 .150 3.81 .080 2.03 .085 2.16 .055 1.40 .350 8.89 .276 7.01 .276 7.01 AREA: 0.11 in 2 Dimension Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.64 0.89 E 0.045 0.060 1. 14 1 .52 F 0.060 0.075 1 .52 1 .91 G 0.095 0.105 2.41 2.67 H 0.092 0.102 2.34 2.59 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.88 V 0.035 0.045 0.89 1. 14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1 .02 1 .78 Dimensions — TO-220AB (L-Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 A H G B F E C D L R TC MEASURING POINT AREA (REF.) 0.17 IN2 O P N M .320 8.13 .526 13.36 .276 7.01 K J GATECATHODE ANODE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

Revised: November 1, 2010 05:04 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. 15 and 16 Amp Standard SCRs Sxx15x & Sxx16x Series Product Selector Part Number Voltage Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx15L X X X X 30mA Standard SCR TO-220L Sxx16R X X X X 30mA Standard SCR TO-220R Sxx16N X X X X 30mA Standard SCR TO-263 Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx15L Sxx15L 2.2 g Bulk 500 Sxx15LTP Sxx15L 2.2 g Tube 500 (50 per tube) Sxx16R Sxx16R 2.2 g Bulk 500 Sxx16RTP Sxx16R 2.2 g Tube 500 (50 per tube) Sxx16NTP Sxx16N 1 .6 g Tube 500 (50 per tube) Sxx16NRP Sxx16N 1 .6 g Embossed Carrier 500 Note: xx = Voltage Gate Cathode Anode 0.512 (13.0) Arbor Hole Diameter 0.945 (24.0) 0.63 (16.0) 1.01 (25.7) 12.99 (330.0) 0.827 (21.0) 0.157 (4.0) Direction of Feed Dimensions are in inches (and millimeters). *Cover tape 0.059 DIA (1.5) TO-263 Embossed Carrier Reel Pack (RP) Specs Meets all EIA-481-2 Standards Part Numbering System Part Marking System S 60 16 R 56 DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 15: 15A 16: 16A SENSITIVITY & TYPE (blank): 30mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated N: TO-263 (D2-Pak) LEAD FORM DIMENSIONS xx: Lead Form Option MYMY Sxx16R Sxx16L