S8012DRP

S8012DRP LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

253©2010 Littelfuse, Inc Revised: July 29, 2010 09:54 AM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx12x Series

12 Amp Standard SCRs

Description

Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1 .5V potential. Features & Benefits t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 1000 V t4VSHFDBQBCJMJUZVQUP 120 A Main Features Symbol Value Unit IT(RMS) 12 A VDRM/VRRM 400 to 1000 V I(5 20 mA Schematic Symbol Absolute Maximum Ratings Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current Sxx12R Sxx12D Sxx12V TC = 105°C 12 A IT(AV) "WFSBHFPOTUBUFDVSSFOU Sxx12R Sxx12D Sxx12V TC =105°C 7 .6 A ITSM 1FBLOPOSFQFUJUJWFTVSHFDVSSFOU TJOHMFIBMGDZDMF G TJ (initial) = 25°C 100 A TJOHMFIBMGDZDMF G TJ (initial) = 25°C 120 I2tI 2t Value for fusing t p = 8.3 ms 60 A 2s di/dt Critical rate of rise of on-state current G 5J = 125°C 100 A/μs I(. Peak gate current TJ = 125°C 2A P( "7 "WFSBHFHBUFQPXFSEJTTJQBUJPO TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 150 TJ Operating junction temperature range -40 to 125 /PUFYY WPMUBHF

Applications

5ZQJDBMBQQMJDBUJPOTBSFDBQBDJUJWFEJTDIBSHFTZTUFNTGPS strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. A K G

Revised: July 29, 2010 09:54 AM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions Value Unit I(5 VD = 12V RL = 60 8 MAX. 20 mA V(5 MIN. 1 MAX. 1 .5 V EWEU VD = VDRM HBUFPQFO 5J = 100°C 400V MIN. 350 V/μs 600V 300 800V 250 1000V 100 VD = VDRM HBUFPQFO 5J = 125°C 400V 250 600V 225 800V 200 V(% VD = VDRM RL = 3.3 k8 TJ = 125°C MIN. 0.2 V I) IT = 200mA (initial) MAX. 40 mA tq IT Up EWEU 7˜T EJEU "˜T MAX. 35 μs tgt I( = 2 x I(5 PW = 15μs IT = 20A TYP . 2 μs Static Characteristics Symbol Test Conditions Value Unit VTM IT Up = 380 μs MAX. 1 .6 V IDRM / IRRM VDRM = VRRM TJ = 25°C MAX. μA o7 20 TJ = 100°C o7 500 1000V 3000 TJ = 125°C o7 1000 Thermal Resistances Symbol Parameter Value Unit RR(J-C) Junction to case (AC) Sxx12R 1 .5 °C/WSxx12V 1 .6 Sxx12D 1 .4 RR(J-A) Junction to ambient Sxx12R 40 °C/W Sxx12V 70 /PUFYY WPMUBHF

255©2010 Littelfuse, Inc Revised: July 29, 2010 09:54 AM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx12x Series Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature Figure 2: Normalized DC Gate T rigger Voltage vs. Junction T emperature 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 100 125 Junction T emperature (TJ ) - (°C) Ratio of IGT / IGT (TJ = 25°C) 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 1 10 125 Junction T emperature (TJ) - (°C) Ratio of VGT / VGT (TJ = 25°C) Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 1 10 125 Junction T emperature (TJ ) - (°C) Ratio of IH / IH (TJ = 25°C) Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: On-State Current vs. On-State Voltage (T ypical) TJ = 25°C Instantaneous On-state Voltage (vT) – Volts Instantaneous On-state Current (i T) – Amps 0 2 4 6 8 10 12 RMS On-State Current [I T(RMS)] - (Amps) Average On-State Power Dissipation [PD(AV)] - (Watts)

Revised: July 29, 2010 09:54 AM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Figure 6: Maximum Allowable Case T emperature vs. RMS On-State Current Figure 7: Maximum Allowable Case T emperature vs. Average On-State Current 100 105 110 115 120 125 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 0 1 2 3 4 5 6 7 8 Average On-State Current [IT(AVE)] - Amps Maximum Allowable Case T emperature (TC) - °C 100 105 110 115 120 125 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° 0 2 4 6 8 10 12 14 RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Case T emperature (TC)- °C Figure 8: Maximum Allowable Ambient T emperature vs. RMS On-State Current 100 120 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Sxx12V Sxx12R RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Ambient T emperature (TA) - °C Figure 9: Maximum Allowable Ambient T emperature vs. Average On-State Current 100 120 5.10.15.00.0 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Sxx12R Sxx12V Average On-State Current [IT(AVE)] - Amps Maximum Allowable Ambient T emperature (TA) - °C /PUFYY WPMUBHF Figure 10: Peak Capacitor Discharge Current 100 1000 0.050.520.55.0 Peak Discharge Current (ITM) - Amps Pulse Current Duration (tw) - ms ITRM tW Figure 11: Peak Capacitor Discharge Current Derating 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 25 50 75 100 125 150 Normalized Peak Current Case T emperature (TC) - °C

257©2010 Littelfuse, Inc Revised: July 29, 2010 09:54 AM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx12x Series Peak Surge (Non-repetitive) On-state Current (ITSM ) – Amps Surge Current Duration - Full Cycles Figure 12: Surge Peak On-State Current vs. Number of Cycles 4611-:'3&26&/$:)[4JOVTPJEBM -0"%3FTJTUJWF RMS On-State Current: [I T(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: (BUFDPOUSPMNBZCFMPTUEVSJOHBOEJNNFEJBUFMZ GPMMPXJOHTVSHFDVSSFOUJOUFSWBM 0WFSMPBENBZOPUCFSFQFBUFEVOUJMKVODUJPO UFNQFSBUVSFIBTSFUVSOFEUPTUFBEZTUBUF SBUFEWBMVF Soldering Parameters Reflow Condition 1Co'SFFBTTFNCMZ Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) oTFDT Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) oTFDPOET Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) oTFDPOET Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

Revised: July 29, 2010 09:54 AM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied T emperature Cycling MIL-STD-750, M-1051, DZDMFT ¡$UP NJO dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 IPVST 7%$¡$ SFMIVNJEJUZ High T emp Storage MIL-STD-750, M-1031, IPVST Low-T emp Storage IPVST Thermal Shock MIL-STD-750, M-1056 DZDMFT ¡$UP¡$ NJOEXFMM UJNFBUFBDIUFNQFSBUVSF TFD NBY transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability "/4*+45% DBUFHPSZ 5FTU" Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish .BUUF5JOQMBUFE Body Material 6-SFDPHOJ[FEFQPYZNFFUJOHnBNNBCJMJUZ classification 94V-0 Lead Material $PQQFS"MMPZ Design Considerations $BSFGVMTFMFDUJPOPGUIFDPSSFDUEFWJDFGPSUIFBQQMJDBUJPOT PQFSBUJOHQBSBNFUFSTBOEFOWJSPONFOUXJMMHPBMPOHXBZ UPXBSEFYUFOEJOHUIFPQFSBUJOHMJGFPGUIF5IZSJTUPS(PPE design practice should limit the maximum continuous DVSSFOUUISPVHIUIFNBJOUFSNJOBMTUPPGUIFEFWJDF SBUJOH0UIFSXBZTUPFOTVSFMPOHMJGFGPSBQPXFSEJTDSFUF semiconductor are proper heat sinking and selection of WPMUBHFSBUJOHTGPSXPSTUDBTFDPOEJUJPOT0WFSIFBUJOH PWFSWPMUBHF JODMVEJOHEWEU BOETVSHFDVSSFOUTBSF the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 ( 0.540 0.575 13.72 14.61 ) 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1 .14 1 .52 R 0.038 0.048 0.97 1 .22 K J A H G B F E C D L R TC MEASURING POINT ANODE O P N M .276 7. 0 1 .526 13.36 .320 8.13 AREA (REF .) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB GATECATHODE ANODE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

259©2010 Littelfuse, Inc Revised: July 29, 2010 09:54 AM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx12x Series Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole Dimension Inches Millimeters Min Typ Max Min Typ Max AREA: 0.040 IN2TC MEASURING POINT GATE G I E D A B C F J H K L 5.28 .208 5.34 .210 Anode Cathode Anode P Q R S Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Dimension Inches Millimeters Min 5ZQ Max Min 5ZQ Max M O N HJ L K .1 18 .063 1.60 .071 1.80 .264 6.71 .264 6.71 .181 4.60 GATE Anode Cathode Anode TC MEASURING POINT G I D E A B C F 5.28 .208 5.34 .210 : 0.040 IN2AREA P Q

Revised: July 29, 2010 09:54 AM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx12R XXXX 20mA 4FOTJUJWF4$3 TO-220R Sxx12V XXXX 20mA Standard SCR TO-251 Sxx12D XXXX 20mA Standard SCR TO-252 /PUFYY WPMUBHF Part Number Marking Weight Packing Mode Base Quantity Sxx12R Sxx12R 2.2 g Bulk 500 Sxx12RTP Sxx12R 2.2 g Tube 500 (50 per tube) Sxx12DTP Sxx12D 0.3 g Tube 750 (75 per tube) Sxx12DRP Sxx12D 0.3 g Embossed Carrier 2500 Sxx12VTP Sxx12V 0.4 g Tube 750 (75 per tube) Note: xx = Voltage 0.512 (13.0) Arbor Hole Diameter DC XXXXXX XXXXXX DC XXXXXX DC XXXXXX XX Gate Cathode Anode 0.63 (16.0) 0.157 (4.0) 0.64 (16.3) 12.99 (330.0) 0.524 (13.3) 0.315 (8.0) 0.059 DIA(1.5) * Cover tape XX XX Direction of Feed Dimensions are in inches (and millimeters). TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards Part Numbering System Part Marking System S 60 12 R 56 DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 12: 12A SENSITIVITY & TYPE (blank): 20mA PACKAGE TYPE R: TO-220 Non-Isolated V: TO-251 (V/I-Pak) D: TO-252 (D-Pak) LEAD FORM DIMENSIONS xx: Lead Form Option S6012DRP yxxxx TO-252AA – (D Package) TO-251AA – (V Package) yxxxx S6012RTP TO-220AB (R Package)