S6AC CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 °C/10 seconds at terminals Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Ampere DO-214AB/SMC Mechanical Data Case: JEDEC DO-214AB/SMC molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Polarity symbol marking on body Mounting Position: Any Weight : 0.0007 ounce, 0.25 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Dimensions in inches and (millimeters) 0.060(1.52) 0.030(0.76) 0.320(8.13) 0.305(7.75) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX. 0.103(2.62) 0.079(2.06) 0.126 (3.20) 0.114 (2.90) 0.280(7.11) 0.260(6.60) 0.245(6.22) 0.220(5.59) Parameter SYMBOLS S6AC S6BC S6DC S6GC S6JC S6KC S6MC UNITS Marking Code MDD S6AC MDD S6BC MDD S6DC MDD S6GC MDD S6JC MDD S6KC MDD S6MC Maximum repetitive peak reverse voltage VRMM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TL=75¥ I(AV) 6.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 200 A Maximum instantaneous forward voltage at 6.0A VF 1.2 V Maximum DC reverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 100.0 μA Typical junction capacitance (NOTE 1) CJ 60.0 pF Typical thermal resistance (NOTE 2) RJA 10.0 ℃/W Operating junction and storage temperature rangeTJ,TSTG -55 to +150 ℃ Note:1.Measured at 1 MHz and applied reverse voltage of 4 V D.C 3.The typical data above is for reference only.
https://www.microdiode.com Rev:2019A0 Page :4 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout 0.150 0.472 Symbol Unit (mm) A C D 0.160 3.8 E B Unit (inch) 0.311 4.1 0.1704.3 E B d F W PA D D1D2 C T Item Tolerance SMC Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.1 0.1 0.1 0.1 2.0 unit:mm 1.50 1.75 7.50 8.00 4.00 2.00 0.25 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 6.15 8.41 2.42 Reel packing SMC 13" 3,000 4.0 6000 190*190*41 330 365*365* 340 42000 14.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(mm)(mm)(mm)(pcs)(mm)(pcs) 7.9 W1Reel width 330.00 50.00 13.00 16.00 16.50 0.05 S6AC THRU S6MC Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Ampere