S63B-DHS1-5KCB2A Standex-Electronics,-Inc

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

standexelectronics.comDatasheet Rev BCB Page 1 +1 970.879.9900 | sensorsales@standexelectronics.com S63B-DHS1-5KCB2A Dual Output Hall Switch Sensor  Dual output hall switch  55 gauss operate  NPN w/5k pull up resistor  Stainless 5/8-18 x 2.5” MS opt housing  Integral 4 pin male 12mm micro connector Part Description: S 63 B - DHS 1 - 5 KCB 2 A Housing Sensor Type & Function Electrical Option Connection Type Stainless Steel MS Opt 5/8-18 x 2.5“ Long Dual Output Hall Switch Sensor NPN, 5k Pull Up Resistor CB2A = Integral 4 Pin Male 12mm Micro Connector ‘Dual Output’ Hall Switch Sensor CUSTOMER FOCUSED ENGINEERING + MODULAR DESIGN HOUSING - Aluminum, stainless steel, plastic, threaded, flange mount, customer specific ELECTRICAL - Every sensor function available in various electrical options (NPN, PNP, TTL, etc.) CONNECTION - Deutsch, Amphenol, many other brands, free end wires, pigtails, any length Need a Custom Sensor Solution?... Send us your application specific requirements at sensorso.com Modify, update, or enhance any sensor with our modular features and functionality.

DESCRIPTION

  • Sensor produces dual pulsing outputs, 1 South Pole and 1 North Pole.
  • Functions as directional limit switch when magnets are mounted at each end of range of motion.
  • No orientation required. Use lock nuts to set air gap within range of target magnets.
  • South Pole element is located closer to sensor face and will detect at a slightly greater operate gap.
  • Note: Operate and release gaps are dependent on the size, material, grade, and temperature of the target magnet.

FEATURES

  • True Zero Speed
  • Greater Detection Gap Than Standard DHS Sensor
  • Rugged, Sealed Housing
  • Solid State (Nothing to wear out!)

standexelectronics.comDatasheet Rev BCB Page 2 +1 970.879.9900 | sensorsales@standexelectronics.com Note: Check our website or contact us to see all of our Options, including more and less sensitive choices. Environmental Specifications Corrosion Resistance 500 hours salt spray ASTM B-117 Installation Torque 80 Foot-Pounds Maximum Enclosure Nema 1,3,4,6,13 & IEC IP67 Vibration 10 G’s 2 to 2000 Hz Sinusodal Mechanical Shock 100 G’s, 11 mS Half-Sine S63B-DHS1-5KCB2A Dual Output Hall Switch Sensor Absolute Max Limits Min Max Unit Supply Voltage, Vcc -32 +32 Volts DC Voltage Applied to Output -0.3 +28 Volts Current Into Output - 25 mA Current Out of Output - Vcc/5k mA Load Dump, 40 mS Rs = 20 - 60 Volts OTHER MATING CONNECTORS AND CABLES AVAILABLE Connections Chart Pin 1 Vcc Pin 3 Ground Pin 2 N Pole Vout Pin 4 S Pole Vout CB2A-DHS Electrical Specifications Conditions Min Max Unit Temperature Range* Operating -40 +110* Deg C Supply Voltage, Vcc Over temperature +4.5 +28 Volts DC Supply Current, Output Off Into Vcc +4 +14 mA Frequency Range 0 20 kHz Internal Pull Up Resistor Vcc to Vout 4.9 5.1 kOhms Saturation Voltage Low 100% tested at 20°C before shipping Vcc=12V, Rload >100k 0 .4 Volts Saturation Voltage High 100% tested at 20°C before shipping Vcc=12V, Rload >100k 11.5 12 Volts Output Rise Time 10-90% C < 100pF - 8.0 µS Output Fall Time 90-10% C < 100pF - 2.0 µS ESD Nondestructive - 8000 Volts EMI 20k to 1 G Hz - 100 V / M * T max = 150°C is available, contact factory. ** Specifications not available at release. Rev B Magnetic Characteristics Min Typ Max Operate Point Over Temp 100% tested at 20°C before shipping 15 G 55 G 76 G Release Point Over Temp 5 G 35 G 57 G Hysteresis Over Temp 5 G 20 G 28 G Inside Depth to N pole Element - .060” - Inside Depth to S pole Element - .090” -

standexelectronics.comDatasheet Rev BCB Page 3 +1 970.879.9900 | sensorsales@standexelectronics.com Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information, please consult the product datasheet, available upon request. This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be incorporated in future revisions. For deviating values, most current specifications and products please contact your nearest sales office. S63B-DHS1-5KCB2A Dual Output Hall Switch Sensor 5K, 5k Pull-up Resistor Marking Handling Instructions DO NOT CONTACT FACE TO FACE CONTACT WITH OTHER MAGNETS MAY REDUCE THE MAXIMUM OPERATING GAP Date Code ‘YYM’ YY = YEAR, M = MONTH A JAN D APR H JUL L OCT B FEB E MAY J AUG M NOV C MAR G JUN K SEP N DEC SENSOR NPN Vcc Vout (Ea ch Cha nne l) GND Sensor Funcon S63B-DHS CHARACTERISTIC-OPTION MARKED ON THIS SURFACE DATE CODE, THIS SURFACE DHS1-5K 22J