S61089 SOCAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Dual Programmable Transient Voltage Suppressor(TVS) Revision March 12, 2014 1 / 3 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. S61089, S61089A & S61089B SOCAY Electronics Co., Ltd. www.socay.com SOP-8 This device has been especially designed to protect subscriber line card interfaces (SLIC) against transient over-voltages. Positive overloads are clipped with 2 diodes. Negative surges are suppressed by 2 thyristors, their breakdown voltage being referenced to-V BAT through the gate. This component presents a very low gate triggering current (IGT) in order to reduce the current consumption on printed circuit board during the firing phase. A particular attention has been given to the internal wire bonding. The configuration ensures reliable protection, eliminating the overvoltage introduced by the parasitic inductances of the wiring (Ldi/dt), especially for very fast transients. u Dual line programmable transient voltage suppressor u Wide negative firing voltage rage : VMGL= -75V (S61089) VMGL= -100V (S61089A) VMGL= -155V (S61089B) u Low dynamic switching voltages V FP and VDGL u Low gate triggering current: I GT = 5mA max u Peak pulse current: I PP = 30A (10/1000μs) u Holding current: I H > 150mA The devices are not subject to ageing and provide a fail safe mode in short circuit for a better protection. They are used to help equipment to meet various standards such as UL1950, IEC / CSA C22.2, UL1459 and FCC part68. Type Marking S61089 SE69 S61089A SE69A S61089B SE69B Parameter Symbol Value Units Repetitive Peak Off-state Voltage, VGK=0 S61089 VDRM -90 V S61089A -120 S61089B -170 Repetitive Peak Gate-cathode Voltage, VKA=0 S61089 VGKRM -85 V S61089A -120 S61089B -170 Non-repetitive Peak On-state Current IPPSM A 10/1000μs (Telcordia (Bellcore) GR-1089-CORE, Issue 2, February 1999, Section 4) 30 5/320μs (ITU-T K.20,K.218 & K.45,K.44 open-circuit voltage wave shape 10/7000 μ) 40 1.2/50μs (Telcordia (Bellcore) GR-1089-CORE, Issue 2, February 1999, Section 4) 100 2/10μs (Telcordia (Bellcore) GR-1089-CORE, Issue 2, February 1999, Section 4) 120 Non-repetitive Peak On-state Current. VGG=-75V 50Hz to 60Hz 0.1s ITSM A 1s 4.8 5s 2.7 300s 0.95 900s 0.93 Operating Free-air Temperature Range TA -40 ~ +85 °C Operating Junction Temperature Range TJ -40 ~ +150 °C Storage Temperature Range TSTG -40 ~ +150 °C
Description
Dual Programmable Transient Voltage Suppressor(TVS) Revision March 12, 2014 2 / 3 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. S61089, S61089A & S61089B SOCAY Electronics Co., Ltd. www.socay.com Symbol Parameter ID Off-state current IH Holding current V(BO) Breakover voltage VF Forward voltage VFRM Peak forward recovery voltage VGK(BO) Gate-cathode impulse breakover voltage IGKS Gate reverse current IGT Gate trigger current VGT Gate-cathode trigger voltage CKA Cathode-anode off-state capacitance Parameter Test Conditions Min. Typ. Max. Unit ID Off-State Current VD=VDRM, VGK=0 TJ=25°C -5 μA TJ=85°C -50 μA V(BO) Breakover Voltage 2/10μs, IPP= -56A, RS=45Ω, VGG= -48V, CG=220nF -57 V 2/10μs, IPP= -100A, RS=50Ω, GG= -48V, CG=220nF -60 1.2/50μs, IPP= -53A, RS=47Ω, VGG=- 48V, CG=220nF -60 1.2/50μs, IPP= -96A, RS=52Ω, VGG= -48V, CG=220nF -64 VGK(BO) Gate-cathode Impulse Breakover Voltage 2/10μs, IPP= -56A, RS=45Ω, VGG= -48V, CG=220nF V 2/10μs, IPP= -100A, RS=50Ω, GG= -48V, CG=220nF 12 1.2/50μs, IPP= -53A, RS=47Ω, VGG= -48V, CG=220nF 12 1.2/50μs, IPP= -96A, RS=52Ω, VGG= -48V, CG=220nF 16 VF Forward Voltage IF=5A,TW=200μs 3 V VFRM Peak Forward Recovery Voltage 2/10μs, IPP= -56A, RS=45Ω, VGG= -48V, CG=220nF V 2/10μs, IPP= -100A, RS=50Ω, GG= -48V, CG=220nF 8 1.2/50μs, IPP= -53A, RS=47Ω, VGG=- 48V, CG=220nF 8 1.2/50μs, IPP= -96A, RS=52Ω, VGG= -48V, CG=220nF 12 IH Holding Current IT=-1A, di/dt=1A/ms, VGG= -48V -150 mA IGKS Gate Reverse Current VGG=VGK=VGKRM, VKA=0 TJ=25°C -5 μA TJ=85°C -50 μA IGT Gate Trigger Current IT= -3A, tp(g)≥20μs, VGG= -48V 5 mA VGT Gate-cathode Trigger Voltage IT= -3A, tp(g)≥20μs, VGG= -48V 2.5 V QGS Gate Switching Charge 1.2/50μs, IPP= -53A, RS=47Ω, VGG=- 48V, CG=220nF 0.1 μC CKA Cathode-anode Off-State Capacitance F=1MHz, Vd=1V, IG=0 VD= -3V 100 pF VD= -48V 50 pF Electrical Characteristics (TA=25℃) Parameters Related to The Diode (TA=25℃)
Dual Programmable Transient Voltage Suppressor(TVS) Revision March 12, 2014 3 / 3 @ SOCAY Electronics Co., Ltd. 2014 Specifications are subject to change without notice. Please refer to www.socay.com for current information. S61089, S61089A & S61089B SOCAY Electronics Co., Ltd. www.socay.com DIM Millimeters Inches Min Max Min Max A 4.80 5.00 0.189 0.197 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.053 0.069 D 0.35 0.51 0.013 0.020 G 1.27BSC 0.050BSC H 0.10 0.25 0.004 0.010 J 0.19 0.25 0.007 0.010 K 0.40 1.27 0.016 0.050 M 0° 8° 0° 8° S 5.80 6.20 0.228 0.244 Soldering Footprint