S6035JTP

S6035JTP LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

279©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx35x Series

35 Amp Standard SCRs

35 A SCRs

Description

Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1 .5V potential. Features & Benefits t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 1000 V t4VSHFDBQBCJMJUZVQUP 500 A Schematic Symbol Main Features Symbol Value Unit IT(RMS) 35 A VDRM/VRRM 400 to 1000 V IGT 40 mA Absolute Maximum Ratings Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current T C = 95°C 35 A IT(AV) Average on-state current T C = 95°C 22.0 A ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 425 A single half cycle; f = 60Hz; TJ (initial) = 25°C 500 I2tI 2t Value for fusing t p = 8.3 ms 1035 A 2s di/dt Critical rate of rise of on-state current f = 60Hz ; TJ = 125°C 150 A/μs IGM Peak gate current TJ = 125°C 3.5 A PG(AV) Average gate power dissipation TJ = 125°C 0.8 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C

Applications

Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage.A K G Agency Approval Agency Agency File Number ® J & K Packages: E71639

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions Value Unit IGT VD = 12V; RL = 308 MAX. 40 mA MIN. 5 VGT MAX. 1 .5 V dv/dt VD = VDRM; gate open; TJ = 100°C 400V MIN. 450 V/μs 600V 425 800V 400 1000V 200 VD = VDRM; gate open; TJ = 125°C 400V 350 600V 325 800V 300 VGD VD = VDRM; RL = 3.3 k8; TJ = 125°C MIN. 0.2 V IH IT = 400mA (initial) MAX. 50 mA tq (1) MAX. 35 μs tgt IG = 2 x IGT; PW = 15μs; IT = 70A TYP . 2 μs Notes : (1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs Static Characteristics Symbol Test Conditions Value Unit VTM IT = 70A; tp = 380μs MAX. 1 .8 V IDRM / IRRM VDRM / VRRM TJ = 25°C 400 – 600V MAX. μA 800 – 1000V 20 TJ = 100°C 400 – 600V 1000 800V 1500 1000V 3000 TJ = 125°C 400 – 600V 2000 800V 3000 Thermal Resistance Symbol Parameter Value Unit RR(J-C) Junction to case (AC) 0.7 °C/W

281©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx35x Series Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature Figure 2: Normalized DC Gate T rigger Voltage vs. Junction T emperature 125 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 Junction Temperature (T J) -- (°C) Ratio of IGT / IGT (TJ = 25°C) Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: On-State Current vs. On-State Voltage (T ypical) 125 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 Junction Temperature (T J) -- (°C) Ratio of VGT / VGT (TJ = 25°C) 125 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 Junction Temperature (T J) -- (°C) Ratio of IH / IH (TJ = 25°C) TJ = 25°C 100 120 Instantaneous On-state Voltage (v T) – Volts Instantaneous On-state Current (iT) – Amps Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. RMS On-State Current 0 5 10 1 5 20 2 5 30 3 5 RMS On-State Current [I T(RMS)] - (Amps) Average On-State Power Dissipation [PD(AV)] - (Watts) 100 105 110 115 120 125 130 0 5 10 1 5 20 2 5 30 3 5 40 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° RMS On-State Current [I T(RMS)] - Amps Maximum Allowable Case Temperature (TC) - °C

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Surge Current Duration -- Full Cycles Peak Surge (Non-repetitive) On-state Current (I TSM) – Amps Figure 7: Maximum Allowable Case T emperature vs. Average On-State Current 105 100 110 115 120 125 130 0 5 10 1 5 20 2 5 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° Average On-State Current [I T(A VE)] - Amps Maximum Allowable Case Temperature (TC) - °C Figure 8: Peak Capacitor Discharge Current Figure 9: Peak Capacitor Discharge Current Derating 100 1000 0.5 1.0 10.0 50.0 Pulse Current Duration (tw) - ms Peak Discharge Current (ITM) - Amps ITRM tW 0.0 0.2 0.4 0.6 0.8 1.0 1.2 02 55 07 5 100 12 5 150 Normalized Peak Current Cas e Temperature (TC) - °C Figure 10: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [I T(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value.

283©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx35x Series Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Dimensions – TO- 218X (J Package) — Isolated Mounting T ab Dimensions – TO- 218AC (K Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.810 0.835 20.57 21 .21 B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1 .40 1 .78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.7 4 H 0.075 0.095 1 .91 2.41 J 0.575 0.625 14.61 15.88 K 0.256 0.264 6.50 6.71 L 0.220 0.228 5.58 5.79 M 0.080 0.088 2.03 2.24 N 0.169 0.177 4.29 4.49 P 0.034 0.042 0.86 1 .07 R 0.113 0.121 2.87 3.07 S 0.086 0.096 2.18 2.44 T 0.156 0.166 3.96 4.22 U 0.164 0.165 4.10 4.20 V 0.603 0.618 15.31 15.70 W 0.000 0.005 0.00 0.13 X 0.003 0.012 0.07 0.30 Y 0.028 0.032 0.71 0.81 Z 0.085 0.095 2.17 2.42 G R Y H D C K B A E F N T M P J L S V U (diameter) W X CATHODE Tc Measurement Point GATE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Z ANODE Dimension Inches Millimeters Min Max Min Max A 0.810 0.835 20.57 21 .21 B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1 .40 1 .78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.7 4 H 0.075 0.095 1 .91 2.41 J 0.575 0.625 14.61 15.88 K 0.211 0.219 5.36 5.56 L 0.422 0.437 10.72 11 .10 M 0.058 0.068 1 .47 1 .73 N 0.045 0.055 1 .14 1 .40 P 0.095 0.115 2.41 2.92 Q 0.008 0.016 0.20 0.41 R 0.008 0.016 0.20 0.41 U 0.164 0.165 4.10 4.20 W 0.085 0.095 2.17 2.42 C D H G F B A E Tc Measurement Point U (diameter) P GATE J ANODE CATHODE M N K L R Q Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). W

285©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx35x Series Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx35K X X X X 40mA Standard SCR TO-218AC Sxx35J X X X 40mA Standard SCR TO-218X Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx35KTP Sxx35K 4.40g Tube 250 (25 per tube) Sxx35JTP Sxx35J 5.23g Tube 250 (25 per tube) Note: xx = Voltage Part Numbering System Part Marking System TO-218 AC (K Package) TO-218 X – (J Package) yxxxx S6035K DEVICE TYPE S: SCR xx: Lead Form Option PACKAGE TYPE K: TO-218AC (Isolated) J: TO-218X (Isolated) CURRENT RATING Lead Form Dimensions 35: 35A VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V SENSITIVITY & TYPE S6 03 5 K [blank]: 40mA