SXX08XSX LITTELFUSE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 11
Technical content
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors
8 Amp Sensitive & Standard SCRs
Sxx08xSx & Sxx08x Series
Description
Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Sensitive gate SCRs are easily triggered with microAmps of current as furnished by sense coils, proximity switches, and microprocessors. Standard phase control SCRs are triggered with few milliamperes of current at less than 1 .5V potential. Features & Benefits
- RoHS compliant
- Glass – passivated junctions
- Voltage capability up to 1000 V
- Surge capability up to 100 AMain Features Symbol Value Unit IT(RMS) 8 A VDRM/VRRM 400 to 1000 V IGT 0.2 to 15 mA Schematic Symbol Agency Approval Agency Agency File Number L Package: E71639
Applications
Typical applications are capacitive discharge systems for strobe lights, nailers, staplers and gas engine ignition. Also controls for power tools, home/brown goods and white goods appliances. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. AK G RoHS Additional Information Datasheet SamplesResources
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Absolute Maximum Ratings — Standard SCRs Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current Sxx08L TC = 100°C
8 ASxx08R
TC = 110°C IT(AV) Average on-state current Sxx08L TC = 100°C
5.1 ASxx08R
TC = 110°C ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 83 A single half cycle; f = 60Hz; TJ (initial) = 25°C 100 I2t I2t Value for fusing tp = 8.3 ms 41 A2s di/dt Critical rate-of-rise of on-state current f = 60 Hz TJ = 125°C 100 A/μs IGM Peak gate current TJ = 125°C 2 A PG(AV) Average gate power dissipation TJ = 125°C 0.5 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C Note: xx = voltage Absolute Maximum Ratings — Sensitive SCRs Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current Sxx08LSy TC = 80°C
8 ASxx08RSy
TC = 95°C IT(AV) Average on-state current Sxx08LSy TC = 80°C
5.1 ASxx08RSy
TC = 95°C ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 83 A single half cycle; f = 60Hz; TJ (initial) = 25°C 100 I2t I2t Value for fusing tp = 8.3 ms 41 A2s di/dt Critical rate of rise of on-state current f = 60 Hz ; TJ = 110°C 70 A/μs IGTM Peak gate current TJ = 110°C 1. 6 A PG(AV) Average gate power dissipation TJ = 110°C 0.4 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 110 °C Note: xx = voltage, y = sensitivity
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Sensitive SCRs Symbol Test Conditions Value UnitSxx08xS2 Sxx08xS3 IGT VD = 6V RL = 100 Ω MAX. 200 500 μA VGT VD = 6V RL = 100 Ω MAX. 0.8 V dv/dt VD = VDRM; RGK = 1kΩ; TJ = 110°C TYP . 8 V/μs VGD VD = VDRM RL = 3.3 kΩ TJ = 110°C MIN. 0.2 V VGRM IGR = 10μA MIN. 6 V IH IT = 20mA (initial) MAX. 6 8 mA tq IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 50 45 μs tgt IG = 2 x IGT PW = 15µs IT = 12A TYP . 4 5 μs Note: xx = voltage x = package Electrical Characteristics (TJ = 25°C, unless otherwise specified) – Standard SCRs Symbol Test Conditions Value UnitSxx08x IGT VD = 12V RL = 60 Ω MAX. 15 mA VGT VD = 12V RL = 60 Ω MAX. 1. 5 V dv/dt VD = VDRM; gate open; TJ = 100°C 400V MIN. 350 V/μs 600V 300 800V 250 1000V 100 VD = VDRM; gate open; TJ = 125°C 400V 250 600V 225 800V 200 VGD VD = VDRM RL = 3.3 kΩ TJ = 125°C MIN. 0.2 V IH IT = 200mA (initial) MAX. 30 mA tq IT=2A; tp=50µs; dv/dt=5V/µs; di/dt=-30A/µs MAX. 35 μs tgt IG = 2 x IGT PW = 15µs IT = 16A TYP . 2 μs Note: xx = voltage x = package Static Characteristics Symbol Test Conditions Value Unit VTM IT = 16A; tp = 380 µs MAX. 1. 6 V IDRM / IRRM VDRM = VRRM Sxx08xyy TJ = 25°C 400 - 600V MAX. μA TJ = 110°C 400 - 600V 250 Sxx08x TJ = 25°C 400 - 800V 10 1000V 20 TJ = 100°C 400 - 800V 200 1000V 3000 TJ = 125°C 400 - 800V 500 Note: xx = voltage, x = package, yy = sensitivity
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Symbol Parameter Value Unit Rθ(J-C) Junction to case (AC) Sxx08RSy 1. 8 °C/W Sxx08LSy 3.4 Sxx08VSy 2.1 Sxx08DSy 1. 5 Sxx08R 1. 8 Sxx08L 3.4 Sxx08V 2.0 Sxx08D 1. 5 Rθ(J-A) Junction to ambient Sxx08RSy 40 °C/W Sxx08LSy 65 Sxx08VSy 85 Sxx08R 40 Sxx08L 50 Sxx08V 70 Note: xx = voltage, y = sensitivity Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature (Sensitive SCR) Figure 2: Normalized DC Gate T rigger Current vs. Junction T emperature (Standard SCR) 0.0 1.0 2.0 3.0 4.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) - (°C) Ratio of IGT / IGT (TJ = 25°C) 125 0.0 1.0 2.0 3.0 4.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) - (°C) Ratio of IGT / IGT (TJ = 25°C)
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Figure 5: On-State Current vs. On-State Voltage (T ypical) Figure 6: Power Dissipation (T ypical) vs. RMS On-State Current RMS On-State Current [IT(RMS)] - (Amps) Average On-State Power Dissipation [PD(AV)] -- (Watts) 0 1 2 3 4 5 6 7 8 125 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) - (°C) Ratio of VGT / VGT (TJ = 25°C) Figure 3: Normalized DC Gate T rigger Voltage vs. Junction T emperature Figure 4: Normalized DC Holding Current vs. Junction T emperature 125 0.0 0.5 1.0 1.5 2.0 -40 -15 10 35 60 85 110 Junction Temperature (TJ) - (°C) Ratio of IH / IH (TJ = 25°C) Instantaneous On-state Voltage (vT) – Volts Instantaneous On-state Current (iT) – Amps TJ = 25°C Figure 7: Maximum Allowable Case T emperature vs. RMS On-State Current Figure 8: Maximum Allowable Case T emperature vs. Average On-State Current 100 105 110 115 120 125 130 Sx08LSy Sxx08RSy Sxx08DSy Sxx08VSy CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive Conduction Angle: 180° FREE AIR RATING Average On-State Current [IT(AVE)] - Amps Maximum Allowable Case Temperature (TC) - °C Sxx08R Sxx08D Sxx08V 0 1 23 4 5 Sxx08L 100 105 110 115 120 125 130 0 1 2 3 4 5 6 7 8 9 Sxx08RSy Sxx08DSy Sxx08VSy Sxx08R Sxx08D Sxx08V Sxx08LSy Sxx08L CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive Conduction Angle: 180° FREE AIR RATING RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Case Temperature (TC) - °C
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Figure 9: Maximum Allowable Ambient T emperature vs. RMS On-State Current 100 120 Sxx08R Sxx08L Sxx08V Sxx08RSy Sxx08LSy RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Sxx08VSy Figure 10: Maximum Allowable Ambient T emperature vs. Average On-State Current 100 120 5.10.15.00.0 Sxx08V Sxx08R Sxx08VSy Average On-State Current [IT(AVE)] - Amps Maximum Allowable Ambient Temperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Sxx08RSy Sxx08LSy Sxx08L Note: xx = voltage, y = sensitivity 100 0001001011 Surge Current Duration -- Full Cycles Peak Surge (Non-repetitive)On-state Current (ITSM) – Amps Figure 13: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [IT(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Figure 11: Peak Capacitor Discharge Current Figure 12: Peak Capacitor Discharge Current Derating 0.0 0.2 0.4 0.6 0.8 1.0 1.2 Normalized Peak Current Sensitive SCR 0 25 50 75 100 125 150 Case Temperature (TC) - °C Standard SCR 100 1000 0.050.105.0 Pulse Current Duration (tw) - ms Peak Discharge Current (ITM) - Amps ITRM tW 1.0
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (t p) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 K J A H G B F E C D L R TC MEASURING POINT ANODE O P N M .276 7.01 .526 13.36 .320 8.13 AREA (REF.) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB GATECATHODE ANODE Dimensions — TO-220AB (L-Package) — Isolated Mounting T ab Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1. 14 1 .52 R 0.038 0.048 0.97 1 .22 A H G B F E C D L R TC MEASURING POINT AREA (REF.) 0.17 IN2 O P N M .320 8.13 .526 13.36 .276 7.01 K J GATECATHODE ANODE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Dimensions — TO-251AA (V/I-Package) — V/I-PAK Through Hole Dimension Inches Millimeters Min Typ Max Min Typ Max AREA: 0.040 IN2TC MEASURING POINT GATE G I E D A B C F J H K L 5.28 .208 5.34 .210 Anode Cathode Anode P Q R S Dimensions — TO-252AA (D-Package) — D-PAK Surface Mount Dimension Inches Millimeters Min Typ Max Min Typ Max M O N HJ L K .118 .063 1.60 .071 1.80 .264 6.71 .264 6.71 .181 4.60 GATE Anode Cathode Anode TC MEASURING POINT G I D E A B C F 5.28 .208 5.34 .210 : 0.040 IN2AREA P Q
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx08RS2 X X 0.2mA Sensitive SCR TO-220R Sxx08LS2 X X 0.2mA Sensitive SCR TO-220L Sxx08VS2 X X 0.2mA Sensitive SCR TO-251 Sxx08DS2 X X 0.2mA Sensitive SCR TO-252 Sxx08RS3 X X 0.5mA Sensitive SCR TO-220R Sxx08LS3 X X 0.5mA Sensitive SCR TO-220L Sxx08VS3 X X 0.5mA Sensitive SCR TO-251 Sxx08DS3 X X 0.5mA Sensitive SCR TO-252 Sxx08R X X X X 15mA Standard SCR TO-220R Sxx08L X X X X 15mA Standard SCR TO-220L Sxx08V X X X X 15mA Standard SCR TO-251 Sxx08D X X X X 15mA Standard SCR TO-252 Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx08L/RyyTP Sxx08L/Ryy 2.2 g Tube 500 (50 per tube) Sxx08DyyTP Sxx08Dyy 0.3 g Tube 750 (75 per tube) Sxx08DyyRP Sxx08Dyy 0.3 g Embossed Carrier 2500 Sxx08VyyTP Sxx08Vyy 0.4 g Tube 750 (75 per tube) Sxx08L/RTP Sxx08L/R 2.2 g Tube 500 (50 per tube) Sxx08DTP Sxx08D 0.3 g Tube 750 (75 per tube) Sxx08DRP Sxx08D 0.3 g Embossed Carrier 2500 Sxx08VTP Sxx08V 0.4 g Tube 750 (75 per tube) Note: xx = Voltage; yy = Sensitivity
© 2016 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 05/02/16 T eccor® brand Thyristors 0.512 (13.0) Arbor Hole Diameter DC XXXXXX XXXXXX DC XXXXXX DC XXXXXX XX Gate Cathode Anode 0.63 (16.0) 0.157 (4.0) 0.64 (16.3) 12.99 (330.0) 0.524 (13.3) 0.315 (8.0) 0.059 DIA(1.5) * Cover tape XX XX Direction of Feed Dimensions are in inches (and millimeters). TO-252 Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-2 Standards Part Numbering System Part Marking System S 60 08 L S2 56 DEVICE TYPE S: SCR VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V CURRENT RATING 08: 8A SENSITIVITY & TYPE Sensitive SCR: S2: 200µA S3: 500µA Standard SCR: (blank): 15mA PACKAGE TYPE L: TO-220 Isolated R: TO-220 Non-Isolated V: TO-251 (V/I-Pak) D: TO-252 (D-Pak) LEAD FORM DIMENSIONS xx: Lead Form Option S6008F1 yxxxx TO-202 Type 1 (F Package) MXXXY S6008RS2 TO-220 AB - (L and R Package) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code S6008DS2 YMLDD Date Code Marking Y:Year Code M: Month Code L: Location Code DD: Calendar Code S6008DS2 YMLDD TO-251AA - (V Package) TO-252AA - (D Package) S6008F1 yxxxx TO-202 Type 1 (F Package) MXXXY S6008RS2 TO-220 AB - (L and R Package) Date Code Marking Y:Year Code M: Month Code XXX: Lot Trace Code S6008DS2 YMLDD Date Code Marking Y:Year Code M: Month Code L: Location Code DD: Calendar Code S6008DS2 YMLDD TO-251AA - (V Package) TO-252AA - (D Package)