S6002ES LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

  • Surge capability > 25 A
  • Blocking voltage (VDRM/VRRM) capability up to 600 V
  • High di/dt capability of 500 A/µs
  • Improved turn-off time (tq) < 55 µsec
  • Sensitive gate for direct microprocessor interface
  • Thru hole and surface mount packages
  • RoHS compliant and Halogen-free

Applications

  • The S6002xS is specifically designed for capacitor discharge application such as high- power gas flame ignition.

S6002xS Thyristor Datasheet 2 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021

S6002xS Thyristor Datasheet 3 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 1. Maximum Ratings Symbol Characteristic Conditions Value Unit IT(RMS) RMS On-state Current (Full Sine Wave) TO-92 TC = 65 °C 2 A SOT-223 & Compak TC = 95 °C IT(AV) Average On-state Current TO-92 TC = 65 °C 1.2 A SOT-223 & Compak TC = 95 °C ITSM Non-repetitive Surge Peak On-state Current (Full Cycle, TJ Initial = 25 °C) TO-92 SOT-223 Compak f = 50 Hz 22.5 A f = 60 Hz 25.0 I2t I2t Value for Fusing f = 50 Hz, tp = 10 ms 2.5 A2s di/dt Critical Rate of Rise of On-state Current IG = 10 mA TO-92 SOT-223 Compak TJ =25 °C 500 A/µs IGM Peak Gate Current tp = 20 µs, TJ =125 °C 1.0 A PG(AV) Average Gate Power Dissipation TJ =125 °C 0.2 W TSTG Storage Junction Temperature -40 to 150 °C TJ Operating Junction Temperature -40 to 125 °C 2. Thermal Characteristics Symbol Characteristic Value Unit Rth(JC) Thermal Resistance, junction-to-case (AC) IT = 1.5 A (RMS)1 TO-92 30 °C/W SOT-223 & Compak 15 Rth(JA) Thermal Resistance, junction-to-ambient (AC) IT = 1.5 A (RMS)1 TO-92 160 °C/W SOT-223 & Compak 60 3. Electrical Characteristics (TJ = 25 °C unless otherwise specified) Symbol Description Conditions Value Unit Min Max IGT DC Gate Trigger Current VD = 6 V, RL 20 200 µA VGT DC Gate Trigger Voltage VD = 6 V, RL - 0.8 V VGRM Peak Reverse Gate Voltage IRG = 10 µA 5 - V IH Holding Current RGK - 5 mA VGD Gate Non-trigger Voltage VD = VDRM, RGK = 1 , TJ = 125 °C 0.2 - V dv/dt Critical Rate-of-rise of Off-stage Voltage TJ = 125 °C, VD = 67% VDRM, Exponential Waveform, RGK 25 - V/µs tq Turn-off Time IT = 0.5 A - 55 µs tgt Turn-on Time IG = 10 mA, PW = 15 ec, IT = 3.0 A(PK) - - µs 4. Static Characteristics (TJ = 25 °C unless otherwise specified) Symbol Description Conditions Value Unit Min Max VTM Peak On-state Voltage ITM = 3 A(PK), tP = 380 µs - 1.5 V IDRM/IRRM Off-state Current, Peak Repetitive TJ = 25 °C @ VD= VDRM, RGK - 5 µA TJ = 125 °C @ VD= VDRM, RGK - 500 µA

S6002xS Thyristor Datasheet 6 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 6. Soldering Parameters Parameter Value Reflow Condition Pb-free Assembly Pre-Heat Temperature Min, TS(Min) 150 °C Temperature Max, TS(Max) 200 °C Time (Min to Max), ts 60 to 180 s Average Ramp-up Rate Liquidus Temp., TL to peak 5 °C/s (Max) TS(Max) to TL Ramp-up Rate 5 °C/s (Max) Reflow Temperature, TL Liquidus 217 °C Time, tL 60 to 150 s Peak Temperature, TP 260 °C (±5 °C) Time within 5 °C of Actual Peak Temperature, tP 20 to 40 s Ramp-down Rate 5 °C/s (Max) Time 25 °C to Peak Temperature, TP 8 minutes (Max) Do Not Exceed 280 °C 7. Physical Specifications Device Feature Detail Terminal Finish 100% Matte Tin-plated Body Material UL Recognized Epoxy meeting Flammability Rating 94 V-0 Terminal Material Copper Alloy 8. Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 110°C for 1008 hours Temperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15 min dwell time Temperature/Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% relative humidity High-temp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-temp Storage 1008 hours; -40°C Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E 9. Design Considerations Careful selection of the correct component for the will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the component rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage.

S6002xS Thyristor Datasheet 7 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 10. Package Dimensions TO-92 (E- Package) Dimension Millimeters Inches Min Max Min Max A 4.450 5.200 0.175 0.205 B 4.320 5.330 0.170 0.210 C 12.700 - 0.500 - D 3.430 - 0.135 - E 3.180 4.190 0.125 0.165 F 2.040 2.660 0.080 0.105 G 0.407 0.533 0.016 0.021 H 1.150 1.390 0.045 0.055 I 2.420 2.660 0.095 0.105 J 0.380 0.500 0.015 0.020 SOT-223 Dimension Millimeters Inches Min Typ Max Min Typ Max D 0.02 - 0.10 0.001 - 0.004 K 10° Max

S6002xS Thyristor Datasheet 8 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 Compak (C- Package) Dimension Millimeters Inches Min Max Min Max A 3.30 3.95 0.130 0.156 B 5.10 5.60 0.201 0.220 C 1.95 2.20 0.077 0.087 D 4.05 4.60 0.159 0.181 E 0.75 1.60 0.030 0.063 F 1.90 2.45 0.075 0.096 G 0.05 0.20 0.002 0.008 H 1.95 2.65 0.077 0.104 J 1.09 1.35 0.043 0.053 K 0.15 0.41 0.006 0.016 L 0.76 1.40 0.030 0.055 M 0.56 0.71 0.022 0.028 N 0.69 0.84 0.027 0.033 P 1.32 1.47 0.052 0.058 11. Part Numbering and Marking Compak (C Package)

S6002xS Thyristor Datasheet 9 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 12. Product Selector Part Number Voltage Gate Sensitivity Package 600 V S6002ES X 200 µA TO-92 S6002TS X 200 µA SOT-223 S6002CS X 200 µA Compak 13. Packing Options Part Number Marking Weight Packing Mode M.O.Q S6002ES S6002ES 0.217 g Bulk 2500 S6002ESAP S6002ES 0.217 g Ammo Pack 2000 S6002ESRP S6002ES 0.217 g Tape & Reel 2000 S6002TSRP S6002TS 0.120 g Tape & Reel 1000 S6002CSRP S6002 0.120 g Tape & Reel 2500 14. Packing Specifications TO-92 (3-Lead) Reel Pack (RP) Radial Leaded Specifications Meets all EIA-468-C Standards

S6002xS Thyristor Datasheet 10 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 TO-92 (3-Lead) Ammo Pack (AP) Radial Leaded Specifications Meets all EIA-468-C Standards SOT-223 Reel Pack (RP) Specifications

S6002xS Thyristor Datasheet 11 Specifications are subject to change without notice. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics. © 2021 Littelfuse, Inc. Revised: 5/6/2021 Compak Embossed Carrier Reel Pack (RP) Specifications Meets all EIA-481-1 Standards For additional information please visit www.Littelfuse.com/powersemi Disclaimer Notice - Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life- saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly forth in applicable Littelfuse product documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics