PAGE . 1May 7,2018REV.08
Document overview
- PDF pages: 5
Technical content
PAGE . 1May 7,2018REV.08 S5AAU SERIES SURFACE MOUNT RECTIFIER NOTES : 1.Measured at 1 MHZ and applied Vr=4 volts. 2.8mm 2 (0.013mm thick)land areas. VOLTAGE 50~1000 Volt 5 AmpereCURRENT MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Single phase , half wave ,60Hz, resistive or inductive load. For capacitive load , derate current by 20%. MECHANICAL DATA
- Case: JEDEC SMC / DO-214AB molded plastic
- Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
- Polarity: Color band denotes cathode end
- Standard packaging: 16mm tape (EIA-481)
- Weight: 0.0082 ounces, 0.23 grams
FEATURES
- Plastic package has Underwriters Laboratory Flammability Classification 94V-O
- For surface mounted applications in order to optimize board space
- Easy pick and place
- Glass passivated junction
- Lead free in compliance with EU RoHS 2.0
- Green molding compound as per IEC 61249 standard
- AECQ101 qualified 1 2 Cathode Anode PARAM ETER SY MBO L S5AAU S5BAU S5DAU S5GAU S5JAU S5MAU UNITS M aximum Recurr ent Peak Rever se Voltage VRRM 50 100 200 400 600 1000 V M aximum RM S Voltage VRM S 35 70 140 280 420 700 V M aximum DC Blocking Voltage VDC 50 100 200 400 600 1000 V M aximum Aver age F or w ard Rectified Cur rent I F(AV) 5 A Peak For w ard Sur ge Cur rent : 8. 3ms single half sine- w ave super imposed on r ated load IFSM 275 A Rating f or Fusing (t<8.3ms) I2t 313 A2sec M aximum F or w ar d Voltage at 5A VF 1.1 V M aximum DC Re ver se Curr ent a t Ra ted DC Blocking Voltage TJ=25OC TJ=125OC I R 250 μA Typical Junct ion Capacitance (NO TES 1) CJ 80 46 pF Typical Junct ion Resistance (NO TES 2) RθJ A RθJL O C / W O perating J unction and Stor age Temperature Range TJ ,TSTG - 55 t o + 150 O C
PAGE . 2May 7,2018REV.08 S5AAU SERIES Fig.5 Typical Forward Characteristics Fig.3 Typical Reverse Characteristics Fig.6 Typical Forward Characteristics Fig.4 Typical Reverse Characteristics Fig.1 Forward Current Derating Curve Fig.2 Typical Junction Capacitance 0 25 50 75 100 125 150 TL, Lead Temperature (°C) IF, Forward Current (A) 100 1000 0.1 100 VR, Reverse Bias Voltage (V) CJ, Junction Capacitance (pF) 50~600V 1000V 0.1 TJ = 150°C TJ = 125°C TJ = 75°C TJ = 25°C VF, Forward Voltage (V) IF, Forward Current (A) 50~600V 0.01 0.1 0 0.2 0.4 0.6 0.8 1 1000V VF, Forward Voltage (V) IF, Forward Current (A) TJ = 150°C TJ = 125°C TJ = 75°C TJ = 25°C 0.001 0.01 0.1 100 20 215 410 605 800 Peak Reverse Voltage (V ） TJ = 125°C TJ = 25°C TJ = 75°C TJ = 150°C 50~600V 0.01 0.1 100 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) TJ = 125°C TJ = 25°C TJ = 75°C IR, Leakage Current (uA) IR, Leakage Current (μA) TJ = 150°C 1000V
PAGE . 3May 7,2018REV.08 S5AAU SERIES MOUNTING PAD LAYOUT ORDER INFORMATION
- Packing information T/R - 3K per 13" plastic Reel T/R - 0. 8K per 7" pla stic Reel
PAGE . 4May 7,2018REV.08 S5AAU SERIES Part No_packing code_Version S5AAU_R1_000A1 S5AAU_R2_000A1 For example : RB500V-40_R2_00001 Part No. Serial number Version code means HF Packing size code means 13" Packing type means T/R Packing Code XX Version Code XXXXX Packing type 1st Code Packing size code 2nd Code HF or RoHS 1st Code 2 nd~5th Code Tape and Ammunition Box (T/B) A N/A 0 HF 0 serial number Tape and Reel (T/R) R 7" 1 RoHS 1 serial number Bulk Packing (B/P) B 13" 2 Tube Packing (T/P) T 26mm X Tape and Reel (Right Oriented) (TRR) S 52mm Y Tape and Reel (Left Oriented) (TRL) L PANASERT T/B CA THODE UP (PBCU) U FORMING F PANASERT T/B CA THODE DOWN (PBCD) D
- Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
- Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
- Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.
- Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
- The products shown herein are not designed and authorized for equipments relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
- Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. S5AAU SERIES PAGE . 5May 7,2018REV.08