S560-6600-DB BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 TM02393 ADSL Magnetics ELECTRICAL SPECIFICATIONS AT 25° C SCHEMATIC
- Operating and storage temperature range: -40° to +85° C
- Meets IEC 695, 2-2 flammability requirements
- PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning
- Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias
- Designed to comply with the requirements of Analog Devices’ Anaconda and Diamondback ADSL over POTS reference designs
- Designed to comply with the requirements of UL60950 and EN60950 safety requirements for ADSL applications
- Minimum interwinding breakdown voltage of 1500 Vrms S560-6600-DB page 1 All measurements are made with pins 2 and 3 connected and pins 6 and 7 connected 1. Inductance measured at 10 kHz, 0.1 Vac 2. Measured with line impedance of 100 Ω rebmuNtraP oitaRsnruT %2± ecnatcudnI 1 %01±Hm egakaeL ecnatcudnI µx amH RCD ΩΩΩΩΩ xam lanidutignoL ecnalaB 2 nimBd noitresnI ssoL 2 xamBd ycneuqerF esnopseR 2 xamBd cinomraH noitrotsiD 2 xamBd eniL:pihC ediSeniL ediSeniL pihC ediS eniL ediS -zHk001 zHM1.1 zHk003 -zHk001 zHM1.1 caV4 zHk04 4 6 Line Ch ip
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 TM02393 ADSL Magnetics MECHANICAL page 2 S560-6600-DB Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards 0.385 [9.78] max 0.450 [11.43] max 0.024 [0.61] 0.098 [2.50] 0.299 [7.59] 0.227 [5.77] 0.339 [8.61] max Suggested PCB Pad Layout 0.048 [1.22] 0.098 [2.50] 0.324 [8.23] 0.061 [1.55] Dim ensions are in inches [millim eters]. Standard dim ension tolerance is ±0.005 [0.13] unless otherwise noted. 1 4 8 5 User Feed Direction O rientation of C omp onent Inside Pocket