S560-6100-85 BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com ADSL Magnetics ©2001 Bel Fuse Inc. Specifications subject to change without notice. 05.01 TM01335 page 1 SCHEMATIC ELECTRICAL SPECIFICATIONS at 25°C S560-6100-85
- Designed for ADSL filter
- Minimum interwinding breakdown voltage of
1000 Vrms
- Operating and storage temperature range: -40° to +85°C
- Meets IEC 695, 2-2 flammability requirements
- PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning
- Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias 1. Inductance measured at 10 kHz, 0.1 Vac 2. Leakage inductance measured at 100 kHz, 0.1 Vac Lucent rebmuNtraP oitaRsnruT ecnatcudnI 1 %6Hm ecnatcudnI 1 ta.nimHm CDAm09 egakaeL ecnatcudnI 2 xamHµ RCD ΩΩΩΩΩ xam 58-0016-065S1 0:16 .24 .25 5 .015 .01 1 : 1
Bel Fuse Inc.
206 Van Vorst Street
Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com FAR EAST Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com EUROPE Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com ADSL Magnetics ©2001 Bel Fuse Inc. Specifications subject to change without notice. 05.01 TM01335 page 2 MECHANICAL S560-6100-85 Dimensions are in inches (millimeters). Standard dimension tolerance is ±0.005 (0.13) unless otherwise noted. Lucent 0.310 [7.87] max 0.390 [9.91] max Suggested PCB Pad Layout 0.240 [6.10] 0.095 [2.41] 0.355 [9.02] 0.040 [1.02] 0.200 [5.08] 0.020 [0.51] 0.335 [8.51] max 0.180 [4.57] 0.440 [11.18] max Orientation of Component Inside Pocket U ser Feed D irection Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 300 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards - JEDEC SO Package