S558-0139-00 BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
defining a degree of excellence Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: BelFuse@belfuse.com Website: http://www.belfuse.com Specifications subject to change without notice. S558-0139-00 -1.0 -16 16-20log((f/30MHz) -10 A S558-3855-00 -1.0 -16 16-20log((f/30MHz) -10 B S558-5999-02 -1.0 -16 16-20log((f/30MHz) -10 A S558-5999-19 -1.0 -16 16-20log((f/30MHz) -10 B MECHANICAL SCHEMATICS 960025A AB
- For use in 100Base-TX, 10/100Base-TX, ATM 155 or
100 Mbps TP-FDDI applications
- Compatible with multiple PHY transceivers
- 350 µH min OCL (inductance) with 8mA DC bias
- Low profile, surface mount packaging available
- Low cost, transmit or receive channel solution
- 2000 Vrms isolation HIGH SPEED LAN MAGNETICS ELECTRICALS AT 25°C Insertion Loss Return Loss (dB) Typ (dB) Min Part No. 1MHz-100MHz 1MHz-30MHz 30MHz-60MHz 60MHz-80MHz Schematic
defining a degree of excellence Corporate Office Bel Fuse Inc.
198 Van Vorst Street, Jersey City, NJ 07302-4496
Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 960025A APPLICATION NOTES APPLICATION CIRCUIT HIGH SPEED LAN MAGNETICS
- These Bel part types have been designed for use in 100 Mbps TP-FDDI, 100Base-TX, 10/100Base-TX and ATM 155 Mbps applications over Category 5 UTP or STP cable.
- Each Bel part type is designed with high voltage isolation transformers and common mode chokes and can be used on both the transmit and receive channels. The designs have been created to provide 350µH OCL with 8mA DC bias applied. Consult the Bel short form catalog and applicable application circuit for the specific configuration of each individual part type.
- Bel's low profile, surface mount packaging is ideal for high speed pick and place machinery. Parts can be shipped on tape and reel for high speed placement. Construction processes have been implemented for thermal compatibility with high temperature IR reflow assembly processing. Post dipping of leads assist with PC board solderability. Each part is optically inspected to meet rigid coplanarity requirements.