SD263C IRF | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
DISCRETE POWER DIODES and THYRISTORS DATA BOOK
SD263C..S50L SERIES FAST RECOVERY DIODES Hockey Puk Version 375A D-671 Bulletin I2071/A
Features
High power FAST recovery diode series 4.5 µs recovery time High voltage ratings up to 4500V High current capability Optimized turn on and turn off characteristics Low forward recovery Fast and soft reverse recovery Press-puk encapsulation Case style conform to JEDEC DO-200AB (B-PUK) Maximum junction temperature 125°C Typical Applications Snubber diode for GTO High voltage free-wheeling diode Fast recovery rectifier applications IF(AV) 375 A @ T hs 55 °C IF(RMS) 408 A IFSM @ 50Hz 5500 A @ 60Hz 5760 A V RRM range 3000 to 4500 V trr 4.5 µs @ T J 125 °C TJ - 40 to 125 °C Parameters SD263C..S50L Units Major Ratings and Characteristics case style DO-200AB (B-PUK)
SD263C..S50L Series D-672 Test conditions Max. values @ TJ = 125 °C Code (µs) (A) (A/µs) (V) (µs) (µC) (A) Recovery Characteristics S50 5.0 1000 100 - 50 4.5 680 240 (*) di/dt = 25A/us @ TJ = 25°C typical trr Ipk di/dt (*)Vr trr Q rr Irr @ 25% IRRM Square Pulse @ 25% IRRM TJ = 25 oC ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Type number Code peak reverse voltage repetitive peak rev. voltage@ T J = TJ max. V V mA 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600 SD263C..S50L 50 IF(AV) Max. average forward current 375 (150) A 180° conduction, half sine wave @ Heatsink temperature 55 (85) °C Double side (single side) cooled IF(RMS) Max. RMS forward current 725 A @ 25°C heatsink temperature double side cooled IFSM Max. peak, one-cycle forward, 5500 t = 10ms No voltage non-repetitive surge current 5760 t = 8.3ms reapplied 4630 t = 10ms 50% V RRM 4850 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I2t for fusing 151 t = 10ms No voltage Initial TJ = TJ max. 138 t = 8.3ms reapplied 107 t = 10ms 50% V RRM 98 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 1510 KA 2√s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 Low level value of forward slope resistance rf2 High level value of forward slope resistance V FM Max. forward voltage drop 3.20 V Ipk= 1000A, TJ = TJ max, tp = 10ms sinusoidal wave Parameter SD263C..S50L Units Conditions Forward Conduction KA 2s A V m Ω 1.53 (I > π x IF(AV)),TJ = TJ max. 1.64 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 1.71 (I > π x IF(AV)),TJ = TJ max. 1.56 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
SD263C..S50L Series D-675 Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-repetitive Surge Current Single and Double Side Cooled
SD263C..S50L Series D-676 Fig. 10 - Thermal Impedance ZthJ-hs CharacteristicFig. 9 - Forward Voltage Drop Characteristics Fig. 11 - Typical Forward Recovery Characteristics Fig. 12 - Recovery Time CharacteristicsFig. 13 - Recovery Charge CharacteristicsFig. 14 - Recovery Current Characteristics
SD263C..S50L Series D-677 Fig. 18 - Frequency Characteristics Fig. 20 - Frequency Characteristics Fig. 17 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 19 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 15 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 16 - Frequency Characteristics
SD263C..S50L Series D-673 120° 0.014 0.015 0.014 0.014 90° 0.018 0.018 0.019 0.019 K/W 60° 0.026 0.027 0.027 0.028 30° 0.045 0.046 0.046 0.046 TJ Max. junction operating temperature range-40 to 125 Tstg Max. storage temperature range -40 to 150 R thJ-hs Max. thermal resistance, 0.11 DC operation single side cooled junction to heatsink 0.05 DC operation double side cooled F Mounting force, ± 10% 9800 N (1000) (Kg) wt Approximate weight 230 g Case style DO-200AB (B-PUK) See outline table Parameter SD263C..S50L Units Conditions Thermal and Mechanical Specifications Ordering Information Table 1 - Diode 2 - Essential part number 3 - 3 = Fast recovery 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - trr code 7 - L = Puk Case DO-200AB (B-PUK) SD 26 3 C 45 S50 L 1 2 3 4 5 6 7 Device Code K/W Conduction angle Units Conditions Single SideDouble Side Single SideDouble Side Sinusoidal conductionRectangular conduction ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
SD263C..S50L Series D-674 Outline Table Fig. 2 - Current Ratings CharacteristicsFig. 1 - Current Ratings Characteristics BOTH ENDS 0.8 (0.03) TWO PLACES 3.5(0.14) DIA. NOM. x 1.8(0.07) DEEP MIN. 34 (1.34) DIA. MAX. 58.5 (2.3 0) D IA . M A X . 26.9 (1.06) 25 .4 (1) BOTH ENDS 53 (2.09) DIA. MAX. Conforms to JEDEC DO-200AB (B-PUK) All dimensions in millimeters (inches)