S50K

SD853C IRF | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

DISCRETE POWER DIODES and THYRISTORS DATA BOOK

SD853C..S50K SERIES FAST RECOVERY DIODES Hockey Puk Version 990A D-733 Bulletin I2093/B

Features

High power FAST rectifier diode series 5.0 µs recovery time High voltage ratings up to 4500V High current capability Optimized turn on and turn off characteristics Low forward recovery Fast and soft reverse recovery Press-puk encapsulation Case style conform to JEDEC DO-200AC (K-PUK) Maximum junction temperature 125°C Typical Applications Snubber diode for GTO High voltage free-wheeling diode Fast recovery rectifier applications Major Ratings and Characteristics IF(AV) 990 A @ T hs 55 °C IF(RMS) 1800 A @ T hs 25 °C IFSM @ 50Hz 19000 A @ 60Hz 19900 A I2t @ 50Hz 1810 KA 2s @ 60Hz 1652 KA 2s VRRM range 3000 to 4500 V trr 5.0 µs @ T J 25 °C TJ - 40 to 125 °C Parameters SD853C..S50K Units case style DO-200AC (K-PUK)

SD853C..S50K Series D-734 Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Type number Code peak reverse voltage repetitive peak rev. voltage@ T J = 125°C V V mA 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600 ELECTRICAL SPECIFICATIONS Voltage Ratings SD853C..S50K 100 IF(AV) Max. average forward current 990 (420) A 180° conduction, half sine wave @ Heatsink temperature 55 (85) °C Double side (single side) cooled IF(RMS) Max. RMS forward current 1800 A @ 25°C heatsink temperature double side cooled IFSM Max. peak, one-cycle forward, 19000 t = 10ms No voltage non-repetitive surge current 19900 t = 8.3ms reapplied 16000 t = 10ms 50% V RRM 16750 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I2t for fusing 1805 t = 10ms No voltage Initial TJ = TJ max. 1645 t = 8.3ms reapplied 1280 t = 10ms 50% V RRM 1165 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 18050 KA 2√s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 Low level value of forward slope resistance rf2 High level value of forward slope resistance V FM Max. forward voltage drop 2.90 V Ipk= 2000A, TJ = 125°C, tp = 10ms sinusoidal wave Parameter SD853C..S50K Units Conditions Forward Conduction KA 2s A V m Ω 0.65 (I > π x IF(AV)),TJ = TJ max. 0.70 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 1.67 (I > π x IF(AV)),TJ = TJ max. 1.50 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. Test conditions Max. values @ TJ = 125 °C Code (µs) (A) (A/µs) (V) (µs) (µC) (A) Recovery Characteristics S50 5.0 1000 100 - 50 6.5 1000 270 typical trr Ipk di/dt (*)Vr trr Q rr Irr @ 25% IRRM Square Pulse @ 25% IRRM TJ = 25 oC

SD853C..S50K Series D-734 Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max. Type number Code peak reverse voltage repetitive peak rev. voltage@ T J = 125°C V V mA 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600 ELECTRICAL SPECIFICATIONS Voltage Ratings SD853C..S50K 100 IF(AV) Max. average forward current 990 (420) A 180° conduction, half sine wave @ Heatsink temperature 55 (85) °C Double side (single side) cooled IF(RMS) Max. RMS forward current 1800 A @ 25°C heatsink temperature double side cooled IFSM Max. peak, one-cycle forward, 19000 t = 10ms No voltage non-repetitive surge current 19900 t = 8.3ms reapplied 16000 t = 10ms 50% V RRM 16750 t = 8.3ms reapplied Sinusoidal half wave, I2t Maximum I2t for fusing 1805 t = 10ms No voltage Initial TJ = TJ max. 1645 t = 8.3ms reapplied 1280 t = 10ms 50% V RRM 1165 t = 8.3ms reapplied I2√ t Maximum I2√t for fusing 18050 KA 2√s t = 0.1 to 10ms, no voltage reapplied V F(TO)1 Low level value of threshold voltage V F(TO)2 High level value of threshold voltage rf1 Low level value of forward slope resistance rf2 High level value of forward slope resistance V FM Max. forward voltage drop 2.90 V Ipk= 2000A, TJ = 125°C, tp = 10ms sinusoidal wave Parameter SD853C..S50K Units Conditions Forward Conduction KA 2s A V m Ω 0.65 (I > π x IF(AV)),TJ = TJ max. 0.70 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. 1.67 (I > π x IF(AV)),TJ = TJ max. 1.50 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max. Test conditions Max. values @ TJ = 125 °C Code (µs) (A) (A/µs) (V) (µs) (µC) (A) Recovery Characteristics S50 5.0 1000 100 - 50 6.5 1000 270 typical trr Ipk di/dt (*)Vr trr Q rr Irr @ 25% IRRM Square Pulse @ 25% IRRM TJ = 25 oC

SD853C..S50K Series D-737 Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics Fig. 7 - Maximum Non-repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-repetitive Surge Current Single and Double Side Cooled

SD853C..S50K Series D-738 Fig. 10 - Thermal Impedance ZthJ-hs CharacteristicFig. 9 - Forward Voltage Drop Characteristics Fig. 12 - Recovery Time CharacteristicsFig. 13 - Recovery Charge CharacteristicsFig. 14 - Recovery Current Characteristics Fig. 11 - Typical Forward Recovery Characteristics

SD853C..S50K Series D-739 Fig. 16 - Frequency CharacteristicsFig. 15 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 17 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 18 - Frequency Characteristics Fig. 19 - Maximum Total Energy Loss Per Pulse Characteristics Fig. 20 - Frequency Characteristics

SD853C..S50K Series D-735 TJ Max. junction operating temperature range-40 to 125 Tstg Max. storage temperature range -40 to 150 R thJ-hs Max. thermal resistance, 0.04 DC operation single side cooled junction to heatsink 0.02 DC operation double side cooled F Mounting force, ± 10% 22250 N (2250) (Kg) wt Approximate weight 425 g Case style DO-200AC (K-PUK) See outline table Parameter SD853C..S50K Units Conditions Thermal and Mechanical Specifications K/W Conduction angle Units Conditions Single SideDouble Side Single SideDouble Side Sinusoidal conductionRectangular conduction 120° 0.0021 0.0021 0.0021 0.0021 90° 0.0026 0.0027 0.0029 0.0029 K/W 60° 0.0039 0.0039 0.0041 0.0041 30° 0.0067 0.0067 0.0068 0.0068 ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) 1 - Diode 2 - Essential part number 3 - 3 = Fast recovery 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - trr code 7 - K = Puk Case DO-200AC (K-PUK) SD 85 3 C 45 S50 K 1 2 3 4 5 6 7 Device Code Ordering Information Table

SD853C..S50K Series D-736 Outline Table Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 3.5(0.14) DIA. NOM. x 2.5(0.1) DEEP MIN. BOTH ENDS 74.5 (2.93 ) D IA . M A X . 1 (0.04) MIN. BOTH ENDS TWO PLACES 47.5 (1.87) DIA. MAX. 67 (2.64) DIA. MAX. 2 7.5 (1.08) M A X . Conforms to JEDEC DO-200AC (K-PUK) All dimensions in millimeters (inches)

SD853C..S50K Series D-735 TJ Max. junction operating temperature range-40 to 125 Tstg Max. storage temperature range -40 to 150 R thJ-hs Max. thermal resistance, 0.04 DC operation single side cooled junction to heatsink 0.02 DC operation double side cooled F Mounting force, ± 10% 22250 N (2250) (Kg) wt Approximate weight 425 g Case style DO-200AC (K-PUK) See outline table Parameter SD853C..S50K Units Conditions Thermal and Mechanical Specifications K/W Conduction angle Units Conditions Single SideDouble Side Single SideDouble Side Sinusoidal conductionRectangular conduction 120° 0.0021 0.0021 0.0021 0.0021 90° 0.0026 0.0027 0.0029 0.0029 K/W 60° 0.0039 0.0039 0.0041 0.0041 30° 0.0067 0.0067 0.0068 0.0068 ΔR thJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) 1 - Diode 2 - Essential part number 3 - 3 = Fast recovery 4 - C = Ceramic Puk 5 - Voltage code: Code x 100 = VRRM (See Voltage Ratings table) 6 - trr code 7 - K = Puk Case DO-200AC (K-PUK) SD 85 3 C 45 S50 K 1 2 3 4 5 6 7 Device Code Ordering Information Table

SD853C..S50K Series D-736 Outline Table Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics 3.5(0.14) DIA. NOM. x 2.5(0.1) DEEP MIN. BOTH ENDS 74.5 (2.93 ) D IA . M A X . 1 (0.04) MIN. BOTH ENDS TWO PLACES 47.5 (1.87) DIA. MAX. 67 (2.64) DIA. MAX. 2 7.5 (1.08) M A X . Conforms to JEDEC DO-200AC (K-PUK) All dimensions in millimeters (inches)