S4G MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Page <1> 09/08/11 V1.1 www.element14.com www.farnell.com www.newark.com Features:
- For surface mounted application.
- Glass passivated junction chip.
- Low forward voltage drop.
- High current capability.
- Easy pick and place.
- High surge current capability.
- High temperature soldering : 260°C / 10 s at terminals. SMC/DO-214AB Dimensions : Inches (Millimetres) Marking Diagram S4X = Specific Device Code G = Green Compound Y = Year M = Work Month
www.element14.com www.farnell.com www.newark.com Surface Mount Rectifiers Page <2> 09/08/11 V1.1 Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Description Symbol S4G S4M Units Maximum Recurrent Peak Reverse Voltage VRRM 400 1,000 VMaximum RMS Voltage VRMS 280 700 Maximum DC Blocking Voltage VDC 400 1,000 Maximum Average Forward Rectified Current at TL = 75°C IF (AV) 4 APeak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC Method) IFSM 100 Maximum Instantaneous Forward Voltage at 4 A VF 1.15 V Maximum DC Reverse Current at T A = 25°C at Rated DC Blocking Voltage (Note 1) at T A = 125°C IR 250 µA Maximum Reverse Recovery Time (Note 4) Trr 1.5 µS Typical Junction Capacitance (Note 2) Cj 60 pF Typical Thermal Resistance (Note 3) RθJL RθJA 47 °C/W Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range TSTG Notes: 1. Pulse test with PW = 300 µs, 1% duty cycle. 2. Measured at 1 MHz and applied V R = 4 Volts. 3. Measured on P C board with 0.6 × 0.6” (16 × 16 mm) copper pad areas. 4. Reverse recovery test conditions : I F = 0.5 A, IR = 1 A, IRR = 0.25 A. Mechanical Data: Case : Moulded plastic. Terminals : Pure tin plated, lead free. Polarity : Indicated by cathode band. Weight : 0.21 g.
Page <3> 09/08/11 V1.1 www.element14.com www.farnell.com www.newark.com Ratings and Characteristic Curves (S4G thru S4M) Typical Reverse Characteristics Lead Temperature (°C) Average Forward Current (A) Maximum Non-Repetitive Forward Surge Current Number of Cycles at 60 Hz Peak Forward Surge Current (A) Typical Junction Capacitance Reverse Voltage (V) Junction Capacitance (pF) Percent of Rated Reverse Voltage (%) Instantaneous Reverse Current (µA) Maximum Forward Current Derating Curve Typical Forward Characteristics Forward Voltage (V) Instantaneous Forward Current (A)
Page <4> 09/08/11 V1.1 www.element14.com www.farnell.com www.newark.com Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2011. Reverse Recovery Time Characteristic and Test Circuit Diagram Notes : 1. Rise time = 7 ns maximum input impedance = 1 megohm 22 pf. 2. Rise time = 10 ns maximum source impedance = 50 ohms.