S4F42Q1 TOSHIBA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

TOSHIBA S4F42Q1(T09),S4F42Z1(T09) TOSHIBA LED LAMP S4F42Q1 (T09), S4F4221 (TO9) PANEL CIRCUIT INDICATOR Unit in mm rotary bpp © Surface Mount Device 24 © = 3.2(L) x 2.8 (W) x 1.9 (H) mm Size {C4 E © Flat-top Type “Ll A @ InGaA€P LED (High-Bright type) ; y , =e De Ea/ES:

2 Colors : Green, Pure Green — a8

e Available of Automounting Machine Use an e Low Drive Current, High Intensity Light Emission - © Clear luminescence is obtained. ' ae ? © High Operating Temperature : Topr-Tstg —40~100°C ign Ope s Pt opr’ ‘stg 1. ANODE vous . @ Standard Embossed Taping 2. CATHODE TOLERANCE: £0.2mm 8mm Pitch : TO9 (1000 pes/ reel) JEDEC _ e Applications : Automotive use, Message Signboard, Backlight, ete. TOSHIBA = Weight : 35mg LINE-UP PRODUCT Sara2qi TaGahP S4F42Z1 InGaA€P MAXIMUM RATINGS (Ta = 25°C)

0 FORWARD REVERSE POWER OPERATING STORAGE

pre er CURRENT VOLTAGE | DISSIPATION | TEMPERATURE | TEMPERATURE Ip (mA) VR (V) Pp (mW) Topr (CC) Tstg (°C) SGI SAPAQZ1 — Aor t00 — Aor t00 9610016AC1 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic arbage @ fhe information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual Property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice, 2000-02-25 1/8

TOSHIBA S4F42Q1(T09),S4F42Z1(T09) ELECTRICAL CHARACTERISTICS (Ta = 25°C) REVERSE FORWARD VOLTAGE PRODUCT VR G CURRENT NAME Ir won| tyP_| Max MAX Lsirmagr | — | 227 | 28 | 20 | 50 | 4] | Ssarazzi | — | 227 | 28 | 20 | 50 [4 | OPTICAL CHARACTERISTICS-1 (Ta = 25°C) LUMIN‘ INTENSITY PRODUCT vu ors NS| NAME MIN | TYP. | MAX siregr [ars | 110 | — | 20 [sarazzi_[ a5] 25 | — | 20 OPTICAL CHARACTERISTICS-2 (Ta = 25°C) Peak Emission USSION SPECTRUM PRODUCT eak Emission Dominant NAME Wavelength Ap aa Wavelength Aq Ip MIN | TYP. | MAX | TYP. | MIN | TYP. | MAX [on [mm [mm] (Note): This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp, please ensure that it will not be affected by this IR light. 2000-02-25 2/8

S4F42Q 1(T09),S4F42Z1(T09) TOSHIBA S4F42Q1 yet Ss ao HECEHAAAT : 8 || [ pee CIC adit iy tet s All | Coole 2 MSS SG ae TEEPE : EAS Sal tA, * *8 ‘ FORWARD CURRENT Ip (mA) “ FORWARD VOLTAGE Vp (V) enanive Luaanous nest - PERS EEE e Cre E rT e LLETT TT TTT) 3 ae Ce META EE] g ———— 3 iEEEEEEEEEE) GOERS a = 2 A ~~ CC b-trP Nery . oe 25 50 5 100 540 viaveuesert 4 tos - CASE TEMPERATURE Te (°C) _ RADIATION PATTERN tecose 3 Too 2 oF COoocoe ae AEE ape CEN PSA | PEEEEEENCEEH LEER Ne LIK) SERS . § wl tt TEASE | HECETENT | meee . z 100 12 2000-02-25 3/8

S4F42Q1(T09),S4F42Z1(T09) TOSHIBA 4F42Q1(TO),54F422Z1(TO9) S4F4271 —va¥ ==Saa=a— eS CAH : PSE EEE SSEE A Pea EI

5 See

| ESESZS = 5 : RAE : Ae CCT 2 te 18 2.0 22 4 sanano conneN pow FORWARD VOLTAGE Vp (V) RELATIVE LUMINOUS peNsrY _ SSS Aone FEEEEEEEES F EEEAGREEA FERRARA gs To] Ty, [eee Po === ———— so ' PERG EE) 4 SEEARREE "FEE EP Z4neace : a1 580 600 : To “ = vaveuenomt A (am) - CASE TEMPERATURE Te (°C) . . RADIATION PATTERN nec owe i Ta € COOP ZR b Eecoceacetee Kt Re @ TC oLON KLEEN | JauuRRER GREE 50%, . z Cope BE I im > ; 4 \\ PEREINS Too | SORA ; if 2000-02-25 4/8

TOSHIBA S4F42Q1(T09),S4F42Z1(T09) SOLDERING Reflow soldering Temperature profile oS 240°C max —— ev & 140-160°C 23 max ee 4°C/s max & § 60-1208 Time (s) — Recommended soldering pattern (Unit in mm) 1.65 115 1.65 1 1 A = pe 6h i 7 4.45 RECOMMENDATION FOR MANUAL SOLDERING Soldering iron : Less than 25 W Temperature : Lower than 300°C Time : Within 3s POST SOLDERING CLEANING When cleaning after soldering is needed, the following condition must be adhered to. Cleaning solvents : AK225 or Alcohol Temperature : 50°C (max) for 30s (max) or 30°C (max) for 3 minutes (max) Ultrasonic : 800 W max 2000-02-25 5/8

TOSHIBA S4F42Q1(T09),S4F42Z1(T09) PACKAGING This LED device is packed in an aluminum envelope with silica gel to avoid moisture absorption. The optical characteristics may be affected by exposure to moisture in the air before soldering and it should be stored under the following conditions. Temperature : 5~30°C Relative Humidity : 60% or lower Baking is required if the device have been stored with unopened for more than 6 months or if the aluminum envelope has been opened for more than 168 h. Recommended baking condition is 60°C for 12h minimum in the dry atmosphere. PRECAUTION FOR MOUNTING Do not apply force to the plastic part of the LED in high temperature conditions. Do not apply friction using a hard materials for avoid injuring the plastic part of the LED. Keep the LED away from any other parts when assembling boards into the set. TAPING SPECIFICATIONS 1. Taping Number (1) Name : TOO (2) Example : S4F420) (T09 Tape Specification Device Identifier 2. Dimension of tape (Unit in mm) DIMENSIONS | TOLERANCE DIMENSIONS | TOLERANCE [> [15 | +0170 ee ce |} Po | 40 | ton IP Pot £0.05 017-0 Po bal D Pg ! t f rc 1 7. 2 mpm _f. u i Fiw ae Lo} Wo Ref ---—- Lo “PBo i L a Di Polarity Ao 2000-02-25 6/8

TOSHIBA S4F42Q1(T09),S4F42Z1(T09) 3. Dimension of reel (Unit in mm) 1340.3 $ y | 4.15.44 1.0_ 22) 1 Ly (| DSS | LD _. {OYA aa 7 rr 4. Leading part (Unit in mm) | Boos o oC] (Lover 40mm |_| over 40mm Leading Part 190mm min 2000-02-25 7/8

TOSHIBA S4F42Q1(T09),S4F42Z1(T09) 5. Packing Form (1) Number of Devices per Reel and Carton TO00 devioes 5000 devices (2) Packing : Silica gel and reel are packed into sealed aluminum pack. 6. Notation Method (1) Example : $4F42Q1 (T09) P/N: 00) NOTE (rank symbol) Lot Number (2) Label location : Reel Carton Tape feed direction i \\ | | ) abel position Label position Aluminum pack : Attached to center of one side 2000-02-25 8/8