S469-01 SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
  • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4306, REV. B SINGLE PHASE FULL WAVE BRIDGE RECTIFIER ASSEMBLY DESCRIPTION: A 10A, 5000 NANOSECOND SINGLE PH ASE BRIDGE RECTIFIER ASSEMBLY. AVAILABLE IN 200V, 400V, 600V, 800V AND 1000V. FEATURE: A Dielectric Withstanding Voltage test will be performed with the metal case of the assembly connected to ground and all four terminals connected to the high potential side of a DC power supply or scope display test. Voltage applied shall be 2800 Vdc and held for 10 seconds. MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at T A = 25oC unless otherwise specified. RATING CONDITIONS MIN TYP MAX UNIT Peak Inverse Voltage (PIV) S469-01 S469-02 S469-03 S469-04 S469-05 - - 200 400 600 800 1000 Vdc Average DC Output Current (TC = Case Temp) (Io) TC = 55 oC TC = 100 oC TC = 125 oC - - 10 6.0 3.0 Amps Peak Single Cycle Surge Current (IFSM) Rated at TA = 55oC tp = 8.3 ms Single Half Cycle Sine Wave, Superimposed On Rated Load - - 100 Amps(pk) Maximum Forward Voltage Per Leg (Vf) If = 15.7 Adc (300 µsec pulse, duty cycle < 2%) - - 1.35 Volts Maximum Instantaneous Reverse Current At Rated (PIV) TA = 25° C TA = 100° C - - 2.0 125 µAmps Reverse Recovery Time (trr) If = 0.5A, Ir = 1.0A, Irr = 0.25A - - 5000 nsec Thermal response RθJC - - 1.5 oC/W Maximum operating and storage temperature range TJ, stg -55 +150 °C S469-01 S469-02 S469-03 S469-04 S469-05
  • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
  • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON TECHNICAL DATA DATA SHEET 4306, REV. B MECHANICAL DIMENSIONS: In Inches / mm Note: Case finish - Black Anodized S469-01 S469-02 S469-03 S469-04 S469-05 Fig. 469 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to impr ove product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devi ces that feature assured safety or by m eans of users’ fail- safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result fr om an accident or any other cause duri ng operation of the user’s units according to the datasheet(s). Sensitron Semic onductor assumes no responsibility for any intellectual property cla ims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permissi on of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations AC AC .750 .735 (19.05 18.67) .375 .367 (9.53 9.32) Square Typ. .225 .175 (5.72 4.45) .450 .350 (11.43 8.89) .450 .350 (11.43 8.89) .225 .175 (5.72 4.45) .570 (14.48) max .370 (9.40) max .076 .066 (1.93 1.68) .101 .091 (2.57 2.31) .030 .020 (.76 .51) .098 .088 (2.49 2.24) .149 .139 (3.78 3.53) Dia. AC + AC–