S446GA SENSITRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
  • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 283, REV - DOUBLER ASSEMBLY DESCRIPTION: A 600 VOLT, 12 AMP, 30 NANOSECOND DOUBLER ASSEMBLY MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at T A = 25oC unless otherwise specified. RATING CONDITIONS MIN TYP MAX UNIT Peak Inverse Voltage (PIV) - - - 600 Vdc Average DC Output Current (TC = Case Temp) (Io) TC = 55 oC TC = 100 oC - - 12 7.5 Amps Peak Single Cycle Surge Current (IFSM) tp = 8.3 ms Single Half Cycle Sine Wave, Superimposed On Rated Load - - 160 Amps(pk) Peak Recurring Surge Current (IFRM) TA = 25 oC - - Amps Operating and Storage Temp. (Top & Tstg) - -55 - +150 °C Maximum Forward Voltage Per Leg (Vf) If = 8.0Adc (300 µsec pulse, duty cycle < 2%) - - 2.4 Volts Maximum Instantaneous Reverse Current At Rated (PIV) T A = 25° C TA = 100° C - - 10 200 µAmps Reverse Recovery Time (trr) If = 0.5A, Ir = 1.0A, Irr = 0.25A Measured on discrete rectifiers prior to assembly. - - 30 nsec Max. Thermal Resistance (RθJC) - - - 2.0 °C/W S446GA
  • 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
  • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON TECHNICAL DATA DATA SHEET 283, REV - MECHANICAL DIMENSIONS: In Inches / mm Note: Case finish - Black Anodized S446GA AC AC+ (1) (3)(2) AC AC– (1) (3)(2) AC + (1) (3)(2) 123 .35 (8.89) .18(4.57) .65 (16.51) .050 ±.003 (1.27 ±.076) Dia Wire .22(5.56)

2 Places

.500 (12.70) Min .147 (3.73) Dia Hole Thru .65 (16.51) Fig. 441 Fig. 444 Fig. 442 Fig. 445 Fig. 443 Fig. 476 DISCLAIMER: 1- The information given herein, including the specifications and dimens ions, is subject to change wi thout prior notice to impr ove product characteristics. Before ordering, purchas ers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconducto r be liable for any damages that may result from an accident or any other cause duri ng operation of the user’s units according to the datas heet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconduc tor be liable for any failure in a semic onductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any fo rm, in whole or part, without the expressed written permissio n of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.