S422-0025-10 BEL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
defining a degree of excellence Corporate Office Bel Fuse Inc.
198 Van Vorst Street, Jersey City, NJ 07302-4496
Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: BelFuse@belfuse.com Internet: http://www.belfuse.com Specifications subject to change without notice. Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 Rise Time Cat 11-R5 Other Delays and Tolerances Available Consult Sales
10 TAP LEADING EDGE CONTROL
Transfer molded for better reliability Compatible with TTL & DTL circuits Terminals: Electro-Tin plate phosphor bronze Performance warranty is limited to specified parameters listed SMD - Tape & Reel available: 32mm Wide x 16mm Pitch, 500 pieces per 13" reel Test Conditions @ 25oC Drive Capabilities Nh Logic 1 Fanout - 20 TTL Loads Max. Nl Logic 0 Fanout - 10 TTL Loads Max.
3.2 Volts
3.0 ns (10%-90%) 1.2 x Total Delay 4 x Pulse Width 80 ma Typical
5.0 Volts
Max. 5.25 0.8 0.5 -1.2 -1.2 -150 70o Units V V V ma ma V V V ua ma ma ma ma C Min. 4.75 2.0 2.7 -60 100 + (25000/TD) PPM/O C Input to Taps + 2 ns or 5% , Whichever is Greater Tap to Tap + 2 ns or 7% , Whichever is Greater Delays measured @ 1.5 V levels on Leading Edge only with no loads on Taps Rise and Fall Times measured from 0.75 V to 2.4 V levels * Ref. Delay from P13, Delay P1-P13 = 4.5 ns typical Tolerances 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns 3 ns Part Numbers 300o C Time in Minutes for 90 Seconds Max > 185o C 225o C Max Temp. Infra Red 200o C 100o CTemp. 86 4 2 SMD Thru-Hole Recommended Temperature Profile Notes .012 .008 100o 90o .23 Max .285 Max .20 Max .60 + .01 (P/N) .80 Max .10 Typ .325 .018 .015 Min .045 bel (DC ) 13 11 865 In 1 Gnd 7 .030 .015 .004 .012 .008 .285 Max .80 Max .10 Typ .60 + .01 .018 .22 Max .350 bel (DC ) (P/N) .375 .12 Min Vcc 14 Coplanarity + .002 S422-0025-10 S422-0030-10 S422-0040-10 S422-0050-10 S422-0060-10 S422-0070-10 S422-0080-10 S422-0090-10 S422-0100-10 S422-0125-10 S422-0150-10 S422-0200-10 S422-0250-10 A447-0025-10 A447-0030-10 A447-0040-10 A447-0050-10 A447-0060-10 A447-0070-10 A447-0080-10 A447-0090-10 A447-0100-10 A447-0125-10 A447-0150-10 A447-0200-10 A447-0250-10 Total Delay Delay per Tap * 22.5 ns * 27 ns * 36 ns 50 ns 60 ns 70 ns 80 ns 90 ns 100 ns 125 ns 150 ns 200 ns 250 ns 2.5 + 1 ns 3 + 1.5 ns 4 + 1.5 ns 5 ns 6 ns 7 ns 8 ns 9 ns 10 ns 12.5 ns 15 ns 20 ns 25 ns Vcc Vih Vil Ioh Iol Voh Vol Vik Iih Iil Ios Icch Iccl Ta PW d Tc Supply Voltage Logic 1 Input Voltage Logic 0 Input Voltage Logic 1 Output Current Logic 0 Output Current Logic 1 Output Voltage Logic 0 Output voltage Input Clamp Voltage Logic 1 Input Current Logic 0 Input Current Short Circuit Output Current Logic 1 Supply Current Logic 0 Supply Current Operating Free Air Temperature Min. Input Pulse Width of Total Delay Maximum Duty Cycle Temp. Coeff. of Total Delay (TD ) Ein Trin PW PP Iccl Vcc Pulse Voltage Rise Time Pulse Width Pulse Period Supply Current Supply Voltage