S407-0009-93

S407-0000-00 BEL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 1

Technical content

defining a degree of excellence Corporate Office Bel Fuse Inc.

198 Van Vorst Street, Jersey City, NJ 07302-4496

Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: Belfuse@compuserve.com Internet: http://www.belfuse.com Specifications subject to change without notice. Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 Cat 24-R4 Transfer molded for better reliability Compatible with ECL & TTL circuits Terminals: Electro-Tin plate phosphor bronze Performance warranty is limited to specified parameters listed Tape & Reel available 24mm Wide x 12mm Pitch, 750 pieces per 13" reel SMD SINGLE OUTPUT PASSIVE DELAY MODULES Part Numbers Notes Other Delays and Impedances Available Consult Sales 0.0 + 0.20 ns 0.5 + 0.20 ns 1.0 + 0.20 ns 1.5 + 0.20 ns 2.0 + 0.20 ns 2.5 + 0.20 ns 3.0 + 0.20 ns 3.5 + 0.20 ns 4.0 + 0.20 ns 4.5 + 0.25 ns 5.0 + 0.25 ns 5.5 + 0.30 ns 6.0 + 0.30 ns 6.5 + 0.30 ns 7.0 + 0.30 ns 7.5 + 0.30 ns 8.0 + 0.30 ns 8.5 + 0.30 ns 9.0 + 0.30 ns 9.5 + 0.30 ns 10.0 + 0.30 ns 1.5 ns 1.6 ns 1.6 ns 1.6 ns 1.6 ns 1.7 ns 1.7 ns 1.7 ns 1.7 ns 1.8 ns 1.8 ns 1.9 ns 2.0 ns 2.1 ns 2.2 ns 2.3 ns 2.4 ns 2.5 ns 2.6 ns 2.7 ns 2.8 ns

0.20 Ohms

0.25 Ohms

0.37 Ohms

0.50 Ohms

0.62 Ohms

0.75 Ohms

0.80 Ohms

0.85 Ohms

0.90 Ohms

0.95 Ohms

Test Conditions @ 25oC Time in Minutes * S407-0000-00 S407-00.5-XX S407-0001-XX S407-01.5-XX S407-0002-XX S407-02.5-XX S407-0003-XX S407-03.5-XX S407-0004-XX S407-04.5-XX S407-0005-XX S407-05.5-XX S407-0006-XX S407-06.5-XX S407-0007-XX S407-07.5-XX S407-0008-XX S407-08.5-XX S407-0009-XX S407-09.5-XX S407-0010-XX Total Delay Rise Time (True) DCR Maximum

1.00 Ohm

1.05 Ohms

1.15 Ohms

1.45 Ohms

1.60 Ohms

1.75 Ohms

1.80 Ohms

1.85 Ohms

1.90 Ohms

1.95 Ohms

2.00 Ohms

S407-10.5-XX S407-0011-XX S407-11.5-XX S407-0012-XX S407-12.5-XX S407-0013-XX S407-13.5-XX S407-0014-XX S407-14.5-XX S407-0015-XX S407-15.5-XX S407-0016-XX S407-16.5-XX S407-0017-XX S407-17.5-XX S407-0018-XX S407-18.5-XX S407-0019-XX S407-19.5-XX S407-0020-XX S407-20.5-XX 10.5 + 0.35 ns 11.0 + 0.35 ns 11.5 + 0.35 ns 12.0 + 0.35 ns 12.5 + 0.35 ns 13.0 + 0.35 ns 13.5 + 0.35 ns 14.0 + 0.35 ns 14.5 + 0.40 ns 15.0 + 0.40 ns 15.5 + 0.40 ns 16.0 + 0.40 ns 16.5 + 0.45 ns 17.0 + 0.45 ns 17.5 + 0.45 ns 18.0 + 0.45 ns 18.5 + 0.50 ns 19.0 + 0.50 ns 19.5 + 0.50 ns 20.0 + 0.50 ns 20.5 + 0.50 ns 2.9 ns 3.0 ns 3.1 ns 3.2 ns 3.3 ns 3.4 ns 3.5 ns 3.6 ns 3.7 ns 3.8 ns 3.9 ns 4.0 ns 4.1 ns 4.2 ns 4.3 ns 4.5 ns 4.7 ns 4.8 ns 5.0 ns 5.1 ns 5.2 ns XX = Zo XX = Zo * Shorting Device Impedance in Ohms + 10%, XX = 55; 55 Ohms, XX = 93; 93 Ohms .375 .350 .300 .285 Max Gnd 8 bel (DC ) (P/N) In 1 .22 Max .030.008 .012 .018 .50 Max .015 .004 86 4 2 for 90 Seconds Max > 185o C 225o C Max Temp. Infra Red Temp.0 100o C 200o C 300o C Gnd 5 Delay Measurement Rise Time Measurement Distortion Insulation Resistance @ 50 Vdc Dielectric Withstanding Voltage Operating T emperature Range Temperature Coefficient of Delay Minimum Input Pulse Width Maximum Duty Cycle

Electrical Characteristics

50% Levels 20%-80% Levels + 10% 10K Megohms Min.

50 Vdc

-55 oC to +125oC 100 PPM/oC Max. 3 x Trout or 5 ns W.I.G. 60% Recommended Temperature Profile Coplanarity + .002 Out 4

1 Volt Typical

1.0 ns (10%-90%) 3 x T otal Delay 4 x Pulse Width Pulse Voltage Rise Time Pulse Width Pulse Period Ein Trin PW PP Rise Time (True) DCR MaximumTotal Delay