S4008LS3 | DigiCamel IC Datasheet

Online Datasheet

Read S4008LS3 online.

T106D2 LITTELFUSE | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 12

Technical content

Features

R o H S C o m p l i a n t
Electrically-isolated TO-220 package
High voltage capability — up to 600 V
High surge capability — up to 100 A
Glass-passivated chip Compak Features
Surface mount package — 0.8 A series
New small-profile three-leaded Compak package
Four gate sensitivities available
Packaged in embossed carrier tape with 2,500 devices per reel
Can replace SOT-223 TO-202 TO-92 3-lead Compak *TO-220 Isolated TO-252 D-Pak TO-251 V-Pak AK G

Sensitive SCRs Data Sheets http://www.littelfuse.com E5 - 2 ©2004 Littelfuse, Inc. +1 972-580-7777 Thyristor Product Catalog See “General Notes” on page E5 - 4 and “Electrical Specifications Notes” on page E5 - 5 TYPE Part Number IT VDRM & VRRM IGT IDRM & IRRM VTMNon-isolated TO-92 TO-202 TO-251 V-Pak Compak TO-252 D-Pak (1) Amps Volts (2) (12) (14) (18) µAmps (20) (21) µAmps (3) (10) Volts See “Package Dimensions” section for variations. (11) IT(RMS) IT(AV) TC or TL = 25 °C TC or TL = 100 °C TC or TL = 110 °C MAX MIN MAX MAX MAX 0.8 A S2S1 0.8 0.51 200 12 2 100 1.7 S4S1 0.8 0.51 400 12 2 100 1.7 S6S1 0.8 0.51 600 12 2 100 1.7 S2S2 0.8 0.51 200 50 2 100 1.7 S4S2 0.8 0.51 400 50 2 100 1.7 S6S2 0.8 0.51 600 50 2 100 1.7 S2S 0.8 0.51 200 200 2 100 1.7 S4S 0.8 0.51 400 200 2 100 1.7 S6S 0.8 0.51 600 200 2 100 1.7 S2S3 0.8 0.51 200 500 2 100 1.7 S4S3 0.8 0.51 400 500 2 100 1.7 S6S3 0.8 0.51 600 500 2 100 1.7 EC103B 0.8 0.51 200 200 1 50 1.7 EC103D 0.8 0.51 400 200 1 50 1.7 EC103M 0.8 0.51 600 200 2 100 1.7 EC103B1 0.8 0.51 200 12 1 50 1.7 EC103D1 0.8 0.51 400 12 1 50 1.7 EC103M1 0.8 0.51 600 12 2 100 1.7 EC103B2 0.8 0.51 200 50 1 50 1.7 EC103D2 0.8 0.51 400 50 1 50 1.7 EC103M2 0.8 0.51 600 50 2 100 1.7 EC103B3 0.8 0.51 200 500 1 50 1.7 EC103D3 0.8 0.51 400 500 1 50 1.7 EC103M3 0.8 0.51 600 500 2 100 1.7 2N5064 0.8 0.51 200 200 1 50 1.7 2N6565 0.8 0.51 400 200 1 100 1.7 1.5 A TCR22-4 1.5 0.95 200 200 1 100 1.5 TCR22-6 1.5 0.95 400 200 1 100 1.5 TCR22-8 1.5 0.95 600 200 2 100 1.5 T106B1 4 2.5 200 200 2 100 2.2 T106D1 4 2.5 400 200 2 100 2.2 T106M1 4 2.5 600 200 2 100 2.2 T107B1 4 2.5 200 500 2 100 2.5 T107D1 4 2.5 400 500 2 100 2.5 T107M1 4 2.5 600 500 2 100 2.5 S2004VS1 S2004DS1 4 2.5 200 50 2 100 1.6 S4004VS1 S4004DS1 4 2.5 400 50 2 100 1.6 S6004VS1 S6004DS1 4 2.5 600 50 2 100 1.6 S2004VS2 S2004DS2 4 2.5 200 200 2 100 1.6 S4004VS2 S4004DS2 4 2.5 400 200 2 100 1.6 S6004VS2 S6004DS2 4 2.5 600 200 2 100 1.6 K G A K A G A A A G K A G K A A K G

Data Sheets Sensitive SCRs ©2004 Littelfuse, Inc. E5 - 3 http://www.littelfuse.com Thyristor Product Catalog +1 972-580-7777 See “General Notes” on page E5 - 4 and “Electrical Specifications Notes” on page E5 - 5 VGT IH IGM VGRM PGM PG(AV) ITSM dv/dt di/dt tgt tq l2t (4) (12) (22) Volts (5) (15) (16) (19) mAmps (17) Amps Volts (17) Watts Watts (6) (7) (13) Amps Volts/µSec Amps/µSec (8) µSec (9) µSec Amps 2/Sec TC or TL = -40 °C TC or TL = 25 °C TC or TL = 110 °C 60/50 Hz MAX MAX MIN MIN TYP (23) TYP MAX 1 0.8 0.2 5 1 6 1 0.1 20/16 8 50 4 50 1.6 1 0.8 0.2 5 1 6 1 0.1 20/16 8 50 4 50 1.6 1 0.8 0.2 5 1 6 1 0.1 20/16 8 50 4 50 1.6 1 0.8 0.2 6 1 6 1 0.1 20/16 8 50 5 45 1.6 1 0.8 0.2 6 1 6 1 0.1 20/16 8 50 5 45 1.6 1 0.8 0.2 6 1 6 1 0.1 20/16 8 50 5 45 1.6 1 0.8 0.2 4 1 6 1 0.1 30/25 8 50 3 50 3.7 1 0.8 0.2 4 1 6 1 0.1 30/25 8 50 3 50 3.7 1 0.8 0.2 4 1 6 1 0.1 30/25 8 50 3 50 3.7 1 0.8 0.2 6 1 6 1 0.1 30/25 8 50 4 50 3.7 1 0.8 0.2 6 1 6 1 0.1 30/25 8 50 4 50 3.7 1 0.8 0.2 6 1 6 1 0.1 30/25 8 50 4 50 3.7

Sensitive SCRs Data Sheets http://www.littelfuse.com E5 - 4 ©2004 Littelfuse, Inc. +1 972-580-7777 Thyristor Product Catalog Specific Test Conditions di/dt — Maximum rate-of-change of on-state current; I GT = 50 mA pulse width ≥15 µsec with ≤0.1 µs rise time dv/dt — Critical rate-of-rise of forward off-state voltage I2t — RMS surge (non-repetitive) on-state current for period of 8.3 ms for fusing IDRM and IRRM — Peak off-state current at V DRM and VRRM IGT — DC gate trigger current V D = 6 V dc; RL = 100 Ω IGM — Peak gate current IH — DC holding current; initial on-state current = 20 mA IT — Maximum on-state current ITSM — Peak one-cycle forward surge current PG(AV) — Average gate power dissipation PGM — Peak gate power dissipation tgt — Gate controlled turn-on time gate pulse = 10 mA; minimum width = 15 µS with rise time ≤0.1 µs tq — Circuit commutated turn-off time VDRM and VRRM — Repetitive peak off-state forward and reverse voltage VGRM — Peak reverse gate voltage VGT — DC gate trigger voltage; V D = 6 V dc; RL = 100 Ω VTM — Peak on-state voltage General Notes

Teccor 2N5064 and 2N6565 Series devices conform to all JEDEC registered data. See specifications table on pages E5 - 2 and E5 - 3.
The case lead temperature ( TC or TL) is measured as shown on dimensional outline drawings in the “Package Dimensions” section of this catalog.
All measurements (except I GT) are made with an external resistor RGK = 1 kΩ unless otherwise noted.
All measurements are made at 60 Hz with a resistive load at an ambient temperature of +25 °C unless otherwise specified.
Operating temperature (T J) is -65 °C to +110 °C for EC Series devices, -65 °C to +125 °C for 2N Series devices, -40 °C to +125 °C for “TCR” Series, and -40 °C to +110 °C for all others.
Storage temperature range (T S) is -65 °C to +150 °C for TO-92 devices, -40 °C to +150 °C for TO-202 and Compak devices, and -40 °C to +125 °C for all others.
Lead solder temperature is a maximum of +230 °C for 10 seconds maximum ≥1/16" (1.59 mm) from case. TYPE Part Number IT VDRM & VRRM IGT IDRM & IRRM VTMIsolated Non-isolated TO-220 TO-202 TO-251 V-Pak TO-252 D-Pak (1) Amps Volts (2) (12) µAmps (20) (21) µAmps (3) (10) Volts See “Package Dimensions” section for variations. (11) IT(RMS) IT(AV) TC = 25 °C TC = 110 °C MAX MAX MIN MAX MAX MAX MAX S2006LS2 S2006FS21 S2006VS2 S2006DS2 6 3.8 200 200 5 250 1.6 S4006LS2 S4006FS21 S4006VS2 S4006DS2 6 3.8 400 200 5 250 1.6 S6006LS2 S6006FS21 S6006VS2 S6006DS2 6 3.8 600 200 5 250 1.6 S2006LS3 S2006FS31 S2006VS3 S2006DS3 6 3.8 200 500 5 250 1.6 S4006LS3 S4006FS31 S4006VS3 S4006DS3 6 3.8 400 500 5 250 1.6 S6006LS3 S6006FS31 S6006VS3 S6006DS3 6 3.8 600 500 5 250 1.6 S2008LS2 S2008FS21 S2008VS2 S2008DS2 8 5.1 200 200 5 250 1.6 S4008LS2 S4008FS21 S4008VS2 S4008DS2 8 5.1 400 200 5 250 1.6 S6008LS2 S6008FS21 S6008VS2 S6008DS2 8 5.1 600 200 5 250 1.6 S2008LS3 S2008FS31 S2008VS3 S2008DS3 8 5.1 200 500 5 250 1.6 S4008LS3 S4008FS31 S4008VS3 S4008DS3 8 5.1 400 500 5 250 1.6 S6008LS3 S6008FS31 S6008VS3 S6008DS3 8 5.1 600 500 5 250 1.6 10 A S2010LS2 S2010FS21 S2010VS2 S2010DS2 10 6.4 200 200 5 250 1.6 S4010LS2 S4010FS21 S4010VS2 S4010DS2 10 6.4 400 200 5 250 1.6 S6010LS2 S6010FS21 S6010VS2 S6010DS2 10 6.4 600 200 5 250 1.6 S2010LS3 S2010FS31 S2010VS3 S2010DS3 10 6.4 200 500 5 250 1.6 S4010LS3 S4010FS31 S4010VS3 S4010DS3 10 6.4 400 500 5 250 1.6 S6010LS3 S6010FS31 S6010VS3 S6010DS3 10 6.4 600 500 5 250 1.6 K A G K A G A A A G K A A K G

Data Sheets Sensitive SCRs ©2004 Littelfuse, Inc. E5 - 5 http://www.littelfuse.com Thyristor Product Catalog +1 972-580-7777 Electrical Specifications Notes (1) See Figure E5.1 through Figure E5.9 for current ratings at specified operating temperatures. (2) See Figure E5.10 for I GT versus TC or TL. (3) See Figure E5.11 for instantaneous on-state current (i T) versus on- state voltage (vT) TYP. (4) See Figure E5.12 for V GT versus TC or TL. (5) See Figure E5.13 for I H versus TC or TL. (6) For more than one full cycle, see Figure E5.14. (7) 0.8 A to 4 A devices also have a pulse peak forward current on- state rating (repetitive) of 75 A. This rating applies for operation at

60 Hz, 75 °C maximum tab (or anode) lead temperature, switching

from 80 V peak, sinusoidal current pulse width of 10 µs minimum, 15 µs maximum. See Figure E5.20 and Figure E5.21. (8) See Figure E5.15 for t gt versus IGT. (9) Test conditions as follows: – TC or TL ≤80 °C, rectangular current waveform – Rate-of-rise of current ≤10 A/µs – Rate-of-reversal of current ≤5A / µ s – ITM = 1 A (50 µs pulse), Repetition Rate = 60 pps – VRRM = Rated – VR = 15 V minimum, VDRM = Rated – Rate-of-rise reapplied forward blocking voltage = 5 V/µs – Gate Bias = 0 V, 100 Ω (during turn-off time interval) (10) Test condition is maximum rated RMS current except TO-92 devices are 1.2 APK; T106/T107 devices are 4 APK. (11) See package outlines for lead fo rm configurations. When ordering special lead forming, add type number as suffix to part number. (12) V D = 6 V dc, RL = 100 Ω (See Figure E5.19 for simple test circuit for measuring gate trigger voltage and gate trigger current.) (13) See Figure E5.1 through Figure E5.9 for maximum allowable case temperature at maximum rated current. (14) I GT = 500 µA maximum at TC = -40 °C for T106 devices (15) I H = 10 mA maximum at TC = -65 °C for 2N5064 Series and 2N6565 Series devices (16) I H = 6 mA maximum at TC = -40 °C for T106 devices (17) Pulse Width ≤10 µs (18) I GT = 350 µA maximum at TC = -65 °C for 2N5064 Series and 2N6565 Series devices (19) Latching current can be higher than 20 mA for higher I GT types. Also, latching current can be much higher at -40 °C. See Figure E5.18. (20) T C or TL = TJ for test conditions in off state (21) I DRM and IRRM = 50 µA for 2N5064 and 100 µA for 2N6565 at 125 °C (22) TO-92 devices specified at -65 °C instead of -40 °C (23) T C = 110 °C VGT IH IGM VGRM PGM PG(AV) ITSM dv/dt di/dt tgt tq l2t (4) (12) (22) Volts (5) (19) mAmps (17) Amps Volts (17) Watts Watts (6) (13) Amps Volts/µSec Amps/µSec (8) µSec (9) µSec Amps 2Sec TC = -40 °C TC = 25 °C TC = 110 °C TC = 110 °C MAX MAX MIN 60/50 Hz TYP TYP MAX 1 0.8 0.25 6 1 6 1 0.1 100/83 10 100 4 50 41 1 0.8 0.25 6 1 6 1 0.1 100/83 8 100 4 50 41 1 0.8 0.25 6 1 6 1 0.1 100/83 8 100 4 50 41 1 0.8 0.25 8 1 6 1 0.1 100/83 10 100 5 45 41 1 0.8 0.25 8 1 6 1 0.1 100/83 8 100 5 45 41 1 0.8 0.25 8 1 6 1 0.1 100/83 8 100 5 45 41 1 0 . 8 0 . 2 5 6161 0 . 1 1 0 0 / 8 3 1 0 1 0 0 4 5 0 4 1 1 0 . 8 0 . 2 5 6161 0 . 1 1 0 0 / 8 3 8 1 0 0 4 5 0 4 1 1 0 . 8 0 . 2 5 6161 0 . 1 1 0 0 / 8 3 8 1 0 0 4 5 0 4 1 1 0 . 8 0 . 2 5 8161 0 . 1 1 0 0 / 8 3 1 0 1 0 0 5 4 5 4 1 1 0 . 8 0 . 2 5 8161 0 . 1 1 0 0 / 8 3 8 1 0 0 5 4 5 4 1 1 0 . 8 0 . 2 5 8161 0 . 1 1 0 0 / 8 3 8 1 0 0 5 4 5 4 1 1 0.8 0.25 6 1 6 1 0.1 100/83 10 100 4 50 41 1 0.8 0.25 6 1 6 1 0.1 100/83 8 100 4 50 41 1 0.8 0.25 6 1 6 1 0.1 100/83 8 100 4 50 41 1 0.8 0.25 8 1 6 1 0.1 100/83 10 100 5 45 41 1 0.8 0.25 8 1 6 1 0.1 100/83 8 100 5 45 41 1 0.8 0.25 8 1 6 1 0.1 100/83 8 100 5 45 41

Sensitive SCRs Data Sheets http://www.littelfuse.com E5 - 6 ©2004 Littelfuse, Inc. +1 972-580-7777 Thyristor Product Catalog *Mounted on 1 cm 2 copper foil surface; two-ounce copper foil Electrical Isolation Teccor’s isolated sensitive SCRs will withstand a minimum high potential test of 2500 V ac rms from leads to mounting tab over the device's operating temperature range. The following table shows other standard and optional isolation ratings. *UL Recognized File #E71639 **For 4000 V isolation, use “V” suffix in part number. Figure E5.1 Maximum Allowable Case Temperature versus RMS On-state Current Figure E5.2 Maximum Allowable Case Temperature versus RMS On-state Current Figure E5.3 Maximum Allowable Case Temperature versus Average On-state Current Thermal Resistance (Steady State) RθJC [Rθ JA] °C/W (TYPICAL) Package Code EL F 2 FCDV Type TO-92 TO-220 TO-202 Type 2, 4, & 41 TO-202 Type 1 & 3 Compak TO-252 D-Pak TO-251 V-Pak

0.8 A 75 [160] 60*

1.5 A 50 [160]

Electrical Isolation * from Leads to Mounting Tab VA CR M S T O - 2 2 0

2500 Standard

4000 Optional **

CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚CASE TEMPERATURE: Measured as Shown on Dimensional Drawing RMS On-State Current [IT(RMS)] – Amps Maximum Allowable Case Temperature (TC) – ˚C Compak EC Series JEDEC 2N Series 100 110 120 130 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚ CASE TEMPERATURE: Measured as Shown on Dimensional Drawing RMS On-state Current [IT(RMS)] – Amps Maximum Allowable Case Temperature (TC) – ˚C 2.6

4 A TO-251

CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚ CASE TEMPERATURE: Measured as Shown on Dimensional Drawing Average On-state Current [IT(AV)] – Amps Maximum Allowable Case Temperature (TC) – ˚C 0.51 Compak EC Series JEDEC 2N Series

Data Sheets Sensitive SCRs ©2004 Littelfuse, Inc. E5 - 7 http://www.littelfuse.com Thyristor Product Catalog +1 972-580-7777 Figure E5.4 Maximum Allowable Case Temperature versus Average On-state Current Figure E5.5 Maximum Allowable Ambient Temperature versus On-state Current Figure E5.6 Maximum Allowable Ambient Temperature versus RMS On-state Current Figure E5.7 Maximum Allowable Ambient Temperature versus Average On-state Current Figure E5.8 Maximum Allowable Case Temperature versus RMS On-state Current Figure E5.9 Maximum Allowable Case Temperature versus Average On-state Current 100 110 120 130 Average On-state Current [IT(AV)] – Amps Maximum Allowable Case Temperature (TC) – ˚C 0.9540 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 ˚CASE TEMPERATURE: Measured as Shown on Dimensional Drawing 1.65 1.9 2.54 T106 and T107 Type 1 and 3 T106 and T107 Type 2 and 4 TCR22 Devices 140 120 100 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING

1.5 A and JEDEC

2N Series IT(AV) and EC Series IT(AV) On-state Current – Amps Maximum Allowable Ambient Temperature (TA) – ˚C

1.5 A Devices

T(RMS) EC Series IT(RMS) 140 120 100 RMS On-state Current [IT(RMS)] – Amps Maximum Allowable Ambient Temperature (TA) – ˚C 2.0 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING TO-220 T106/T107 TO-202 Type 1 and 3 T106/T107 TO-202 Type 2 and 4 and TO-251 100 120 140 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180 FREE AIR RATING Average On-state Current [IT(AV)] – Amps Maximum Allowable Ambient Temperature (TA) – ˚C TO-220 T106/T107 TO-202 Type 1 and 3 T106/T107 TO-202 Type 2 and 4 and TO-251 2468 1 00 100 105 110 115 CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚ TEMPERATURE: Measured as Shown on Dimensional Drawings RMS On-state Current [IT(RMS)] – Amps Maximum Allowable Case Temperature (TC) – ˚C

6 A TO-220

8 A TO-220

10 A TO-220

6 A TO-251

8 A TO-251

10 A TO-251

Average On-state Current [IT(AV)] – Amps Maximum Allowable Case Temperature (TC) – ˚C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚CASE TEMPERATURE: Measured as Shown on Dimensional Drawings

Sensitive SCRs Data Sheets http://www.littelfuse.com E5 - 8 ©2004 Littelfuse, Inc. +1 972-580-7777 Thyristor Product Catalog Figure E5.10 Normalized DC Gate-Trigger Current versus Case Temperature Figure E5.11 Instantaneous On-state Current versus On-state Voltage (Typical) Figure E5.12 Normalized DC Gate-Trigger Voltage versus Case Temperature Figure E5.13 Normalized DC Holding Current versus Case Temperature -65 -15 +25 +65 +110 +125-40 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 Case Temperature (TC) – ˚C Ratio of IGT IGT (TC = 25 ˚C) See General Notes for specific device operating temperature range. TC = 25˚C

6 A to 10 A Devices

0.8 A to 1.5 A TO-92, T106/T107, and Compak Instantaneous On-state Voltage (vT) – Volts Instantaneous On-state Current (iT) – Amps

4 A TO-251 and TO-252

-65 -15 +25 +65 +110 +125-40 0.5 1.0 1.5 2.0 Case Temperature (TC) – ˚C Ratio of VGT VGT (TC = 25 ˚C) See General Notes for specific operating temperature range -65 -40 -15 +25 +65 +110 +125 1.0 2.0 3.0 4.0 See General Notes for specific operating temperature range. Case Temperature (TC) – ˚C Ratio of IH IH(TC = 25 ˚C)

Data Sheets Sensitive SCRs ©2004 Littelfuse, Inc. E5 - 9 http://www.littelfuse.com Thyristor Product Catalog +1 972-580-7777 Figure E5.14 Peak Surge On-state Current versus Surge Current Duration Figure E5.15 Typical Turn-on Time versus Gate Trigger Current Figure E5.16 Power Dissipation (Typical) versus RMS On-state Current 1 2 3 4 5 6 8 10 20 30 40 50 60 80 100 200 300 400 600 100 0 100 200 SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS ON-STATE CURRENT: [IT(RMS)]: Max Rated Value at Specified Case Temperature Surge Current Duration – Full Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps Notes: 1) Gate control may be lost during and immediately following surge current interval. 2) Overload may not be repeated until junction temperature has returned to steady-state rated value.

6 A Devices

8 A Devices

10 A Devices

0.8 A TO-92

0.01 0.1 1 10 100 0.1 1.0 100 IGT = 50 µA MAX IGT = 200 µA MAX IGT = 500 µA MAX TC = 25 ˚C IGT = 12 µA MAX DC Gate Trigger Current (IGT) – mA Turn-on Time (tgt) – µs 01234 1.0 2.0 3.0 4.0 5.0 T106 and T107

0.8 A TO-92 and Compak

RMS On-state Current [IT(RMS)] – Amps Average On-state Power Dissipation [PD(AV)] – Watts CURRENT WAVEFORM: Half Sine Wave LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚

Sensitive SCRs Data Sheets http://www.littelfuse.com E5 - 10 ©2004 Littelfuse, Inc. +1 972-580-7777 Thyristor Product Catalog Figure E5.17 Power Dissipation (Typical) versus RMS On-state Current Figure E5.18 Normalized DC Latching Current versus Case Temperature Figure E5.19 Simple Test Circuit for Gate Trigger Voltage and Current Measurement Note: V1 — 0 V to 10 V dc meter VGT — 0 V to 1 V dc meter IG — 0 mA to 1 mA dc milliammeter R1 — 1 k potentiometer To measure gate trigger voltage and current, raise gate voltage (VGT) until meter reading V1 drops from 6 V to 1 V. Gate trigger voltage is the reading on V GT just prior to V1 dropping. Gate trig- ger current I GT can be computed from the relationship where IG is reading (in amperes) on meter just prior to V1 drop- ping. Note: IGT may turn out to be a negative quantity (trigger current flows out from gate lead). If negative current occurs, I GT value is not a valid reading. Remove 1 k resistor and use I G as the more correct I GT value. This will occur on 12 µA gate products. 02468 1 0 RMS On-state Current [IT(RMS)] – Amps CURRENT WAVEFORM: Half Sine Wave LOAD: Resistive or Inductive CONDUCTION ANGLE: 180˚ Average On-state Power Dissipation [PD(AV)] – Watts

6 A to 10 A

TO-220, TO-202, TO-251, and TO-252 -65 -15 +25 +65 +110 +125-40 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 Case Temperature (TC) – ˚C Ratio of IL IL (TC = 25 ˚C) See General Notes for specific device operating temperature range.

6 VDC

D.U.T. Reset Normally-closed Pushbutton 1 k (1%) IG VGT 100 IGT IN4001 IGT IG VGT

Data Sheets Sensitive SCRs ©2004 Littelfuse, Inc. E5 - 11 http://www.littelfuse.com Thyristor Product Catalog +1 972-580-7777 Figure E5.20 Peak Repetitive Capacitor Discharge Current Figure E5.21 Peak Repetitive Sinusoidal Curve 180 160 140 120 100 1.0 3.0 5.0 7.0 10 30 50 70 100 Peak Discharge Current (ITM) – Amps Peak Current Duration (tW) – µs

0.8 A to 4 A

tW = 5 TIME CONSTANTS 60 Hz 12 Hz 1 Hz 180 160 140 120 100 1.0 3.0 5.0 7.0 10 30 50 70 100 Peak Discharge Current (ITM) – Amps Peak Current Duration (tW) – µs

Product Information

S4008LS3 specifications and overview.

Summary

Sensitive SCRs

Description

Sensitive SCRs

Source title S4008LS3 Datasheet(PDF) - Littelfuse

Related Parts

More parts from the same family.

Browse manufacturer