DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Document 124-1 Revised 01/16/14 These space saving low and high pass filters are pre- tuned, tight tolerance modules that serve a wide variety of filtering requirements.
- 3rd order Butterworth alignment
- 50 Ohm characteristic impedance; less than 0.3 dB insertion loss Low Pass Filters Part number1 -3 dB Cutoff Irms (mA)2 S3LP156L_ 15 MHz 200 S3LP306L_ 30 MHz 300 S3LP606L_ 60 MHz 300 S3LP157L_ 150 MHz 400 S3LP307L_ 300 MHz 400 S3LP507L_ 500 MHz 500 S3LP707L_ 700 MHz 500 S3LP807L_ 800 MHz 500 S3LP907L_ 900 MHz 500 S3LP108L_ 1.0 GHz 500 S3LP128L_ 1.2 GHz 500 S3LP158L_ 1.5 GHz 500 S3LP188L_ 1.8 GHz 500 S3LP218L_ 2.1 GHz 500 Visit RF Inductors – Color Coding for color coding explanation. 0.205 5,21 0.160 4,06 0.180 4,57 0.020 0,51 0.125 3,18 0.070 1,78 0.120 3,05 max max Part marking 2nd digit (over P1) Multiplier (×10) (over P2) 1st digit (over P3) 0.085 2,16 max 0.040 1,02 Recommended Land Pattern 0.055 1,40 0.050 1,27 0.040 1,02 0.045 1,14P1 1. When ordering, please specify packaging code: S3HP156LC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). 2. Current that causes a 15°C rise from 25°C ambient. 3. Operating temperature range -40°C to +85°C. 4. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering High Pass Filters Part number1 -3 dB Cutoff Irms (mA)2 S3HP156L_ 15 MHz 300 S3HP306L_ 30 MHz 300 S3HP606L_ 60 MHz 300 S3HP157L_ 150 MHz 300 S3HP307L_ 300 MHz 300 S3HP507L_ 500 MHz 500 S3HP807L_ 800 MHz 500 Designer’s Kit D302 contains 3 of each value Terminations RoHS compliant silver over copper or gold over nickel over silver Weight 64.7 – 69.0 mg Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 12 per billion hours / 83,333,333 hours, calculated per Telcordia SR-332 Packaging 600/7″ reel; 2200/13″ reel Paper tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.3 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf.
Frequency Response—Low Pass Filters* Frequency Response—High Pass Filters* *Measured on Agilent/HP 8753D network analyzer 1 10 100 Frequency (MHz) dB Atten uation (re: )/L09202 S3HP-606 S3HP-306 S3HP-156 10 100 1000 Frequency (MHz) dB Atten uation (re: )/L09202 S3HP-807 S3HP-507 S3HP-307 S3HP-157 10 100 1000 Frequency (MHz) dB Atten uation (re: )/L09202 S3LP-156 S3LP-306 S3LP-606 100 1000 10000 Frequency (MHz) dB Atten uation (re: )/L09202 S3LP-157 S3LP-307 S3LP-507 S3LP-807 100 1000 10000 Frequency (MHz) dB Atten uation (re: )/L09202 S3LP-907 S3LP-707 S3LP-128 100 1000 10000 Frequency (MHz) dB Atten uation (re: )/L09202 S3LP-188 S3LP-158 S3LP-218 Document 124-2 Revised 01/16/14 IN OUTIN OUTL1 L2 C1 C2 Low pass filter High pass filter P3 P3 P2 P2 P1 P1