S3LP156L COILCRAFT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

© Coilcraft, Inc. 2008 Specifications subject to change without notice. Please check our website for latest information. Surface Mount LC Filters Document 124-1 Document 124-1 Revised 11/16/06 These space saving low and high pass filters are pre- tuned, tight tolerance modules which serve a wide variety of filtering requirements. They feature 3rd order Butterworth alignment, less than 0.3 dB insertion loss and a compact, 1812-size construc- tion ideally suited for auto insertion and reflow soldering.

  • 3rd order Butterworth alignment  50 Ohm characteristic impedance  Less than 0.3 dB insertion loss Coilcraft Designer’s Kit D302 contains samples of all low pass filters. To order, contact Coilcraft or visit http://order.coilcraft.com. Low Pass Filters Part number1 -3 dB Cutoff Irms (mA) 2 S3LP156L_ 15 MHz 200 S3LP306L_ 30 MHz 300 S3LP606L_ 60 MHz 300 S3LP157L_ 150 MHz 400 S3LP307L_ 300 MHz 400 S3LP507L_ 500 MHz 500 S3LP707L_ 700 MHz 500 S3LP807L_ 800 MHz 500 S3LP907L_ 900 MHz 500 S3LP108L_ 1.0 GHz 500 S3LP128L_ 1.2 GHz 500 S3LP158L_ 1.5 GHz 500 S3LP188L_ 1.8 GHz 500 S3LP218L_ 2.1 GHz 500 High Pass Filters Part number1 -3 dB Cutoff Irms (mA) 2 S3HP156L_ 15 MHz 300 S3HP306L_ 30 MHz 300 S3HP606L_ 60 MHz 300 S3HP157L_ 150 MHz 300 S3HP307L_ 300 MHz 300 S3HP507L_ 500 MHz 500 S3HP807L_ 800 MHz 500 Weight: 64.7 – 69.0 mg Tape and reel: 600/7″ reel; 2200/13″ reel 12 mm tape width See Tape and Reel Specifications section for packaging data. See Color Coding section for part marking data. 1. When ordering, please specify termination and packaging codes: S3HP156LLLLLC Termination: L = RoHS compliant silver over copper or gold over nickel over silver. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =1 3″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). 2. Current that causes a 15°C rise from 25°C ambient. 3. Operating temperature range -40°C to +85°C. 4. Electrical specifications at 25°C. 0.205 5,21 0.160 4,06 0.180 4,57 0.020 0,51 0.125 3,18 0.070 1,78 0.120 3,05 max max Part marking 2nd digit (over P1) Multiplier (×10) (over P2) 1st digit (over P3) 0.085 2,16 max 0.040 1,02 Recommended Land Pattern 0.055 1,40 0.050 1,27 0.040 1,02 0.045 1,14P1

© Coilcraft, Inc. 2008 Surface Mount LC Filters Specifications subject to change without notice. Please check our website for latest information. Document 124-2 Document 124-2 Revised 11/16/06 Frequency Response—Low Pass Filters* Frequency Response—High Pass Filters* *Measured on Agilent/HP 8753D network analyzer Low pass In Out High pass In Out 1 10 100 Frequency (MHz) dB Atten uation (re: 50 ) /L09202 S3HP-606 S3HP-306 S3HP-156 10 100 1000 Frequency (MHz) dB Atten uation (re: 50 ) /L09202 S3HP-807 S3HP-507 S3HP-307 S3HP-157 10 100 1000 Frequency (MHz) dB Atten uation (re: 50 ) /L09202 S3LP-156 S3LP-306 S3LP-606 100 1000 10000 Frequency (MHz) dB Atten uation (re: 50 ) /L09202 S3LP-157 S3LP-307 S3LP-507 S3LP-807 100 1000 10000 Frequency (MHz) dB Atten uation (re: 50 ) /L09202 S3LP-907 S3LP-707 S3LP-128 100 1000 10000 Frequency (MHz) dB Atten uation (re: 50 ) /L09202 S3LP-188 S3LP-158 S3LP-218