S3ABF UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
For surface mounted applications Low profile package Glass passivated chip junction Easy to pick and place Lead free in comply with EU RoHS 2011/65/EU directives Case: SMBF Quantity Per Reel : 3,000pcs Approx. Weight : 57mg/0.002oz Terminals: Solderable per MIL-STD-750, Method 2026 1ğCathode 2ğAnode Parameter Symbol S3ABF S3BBF S3DBF S3GBF S3JBF S3KBF S3MBF Units VRRM VRMS VDC VF IR IR Cj RθJA RθJC TJ,Tstg V V V V pF Ta=25℃ Ta=125℃ č1Ď Note: (1) Measured at 1MHz and applied reverse voltage of 4 VDC. Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Forward Voltage at 3A Typical Junction Capacitance Operating and Storage Temperature Range 100 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 SMBF Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load Maximum DC Reverse Current at Rated DC Reverse Voltage č2Ď IFSM A80 1.1 5.0 150 -55 ~ +150 μA Typical Thermal Resistance Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. Maximum Average Forward Rectified Current at Tc=115℃ IF(AV) 3.0 A ℃/W
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/3 S3ABF~S3MBF Surface Mount General Purpose Silicon Rectifiers Electrical Characteristics Curves Fig. 2 Typical Reverse CharacteristicsFig.1 Maximum Average Forward Current Rating Fig. 4 Typical Junction CapacitanceFig.3 Typical Forward Characteristics Fig.5 Maximum Non-Repetitive Peak Forward Surage Current 25 50 75 100 125 150 175 Average Forward Current (A) Case Temperature (°C) 1.0 2.0 3.0 Single phase half-wave 60 Hz resistive or inductive load 0.1 1.0 100 20 40 60 80 100 1200 140 Percent of Rated Peak Voltage (%)Reverse Instaneous Current（ A）Reverse μ T =125J °C T =25J °C 0.1 0.6 1.0 1.2 1.6 Instaneous Forward Current (A) Instaneous Forward Voltage (V) 0.4 1.0 1.40.8 1.8 T =25J °C Junction Capacitance ( pF) 1.0 10 1000.1 100 Reverse Voltage (V) T =25J °C 100 120 10 100 Peak A)Forward Surage Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method)
Revision March 1,2022 www.unsemi.com.tw Surface Mount General Purpose Silicon Rectifiers ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/3 S3ABF~S3MBF Package Outline & Dimensions Marking Type Number S3ABF S3BBF S3DBF S3GBF S3JBF S3KBF S3MBF Making S3AB S3BB S3DB S3GB S3JB S3KB S3MB A C ∠ALL ROUND V AM e UNIT mm max min mil max min A C D E HE ∠ 2.2 1.9 e Bottom View HE g Top View 1.0 g g ∠ALL ROUND E D A E pad pad 51 10 173 146 216 43 7 165 138 200
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.