S3AB ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 5
Technical content
Features
- Glass Passivated Chip Junction
- High Surge Current Capacity
- Low Forward V oltage: 1.15 V Maximum
- UL Flammability 94V−0 Classification
- MSL 1 per J−STD−020
- RoHS Compliant / Green Molding Compound
- NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
- These are Pb−Free and Halide Free Devices ABSOLUTE MAXIMUM RATINGS Values are at TA = 25°C unless otherwise noted. Symbol Parameter Value UnitS3AB S3BB S3DB S3GB S3JB S3KB S3MB VRRM Repetitive Peak Reverse Voltage 50 100 200 400 600 800 1000 V VRMS RMS Reverse Voltage 35 70 140 280 420 560 700 V VR DC Blocking Voltage 50 100 200 400 600 800 1000 A IF(AV) Average Forward Rectified Current 3 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load 80 A TJ Operating Junction Temperature Range −55 to 150 °C TSTG Storage Temperature Range −55 to 150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Values are at TA = 25°C unless otherwise noted. (Note 1) Symbol Parameter Value Unit R/C0113JA Typical Thermal Resistance, Junction−to−Ambient 148 °C/W /C0089JL Typical Thermal Characteristics, Junction−to−Lead 14 °C/W 1. Device mounted on FR −4 PCB, board size = 76.2 mm x 114.3 mm per JESD51−3. ELECTRICAL CHARACTERISTICS Values are at TA = 25°C unless otherwise noted. Symbol Parameter Test Conditions Min Typ Max Unit VF Instantaneous Forward Voltage (Note 2) IF = 3 A − − 1.15 V IR Reverse Current at Rated VR TJ = 25°C − − 10 /C0109A TJ = 125°C − − 250 trr Reverse Recovery Time IF = 0.5 A, IR = 1 A, Irr = 0.25 A − 1.5 − /C0109s CJ Junction Capacitance VR = 4 V, f = 1 MHz − 40 − pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse test with PW = 300 /C0109s, 1% duty cycle. MARKING DIAGRAM Cathode Anode Z = Assembly Plant Code Y = Year WW = Work Week S3xB = Specific Device Code x = A, B, D, G, J, K, M ZYWW S3xB SMB CASE 403AF Polarity Mark See detailed ordering and shipping information on page 3 of this data sheet. NOTE: Some of the devices on this data sheet have been DISCONTINUED. Please refer to the table on page 3.
ORDERING INFORMATION
S3AB−S3MB www.onsemi.com TEST CIRCUIT DIAGRAM Oscilloscope (Note 3) Pulse Generator (Note 4) (+)
50 Vdc
(approx) (−) 1 /C0087 Non Inductive Figure 6. Reverse Recovery Time
- Rise Time = 7 ns max. Input Impedance = 1 M /C0087, 22 pF
- Rise Time = 10 ns max. Source Impedance = 50 /C0087, 22 pF
Part Number Device Code Marking Package Shipping† NRVS3BB* S3BB SMB (Pb−Free, Halide−Free) 3000 / Tape & Reel S3DB S3DB S3GB, NRVS3GB* S3GB S3JB, NRVS3JB* S3JB S3KB S3KB S3MB, NRVS3MB* S3MB DISCONTINUED (Note 5) S3AB, NRVS3AB* S3AB SMB (Pb−Free, Halide−Free) 3000 / Tape & Reel S3BB S3BB NRVS3DB* S3DB NRVS3KB* S3KB †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NRV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable 5. DISCONTINUED: These devices are not recommended for new design. Please contact your onsemi representative for information. The most current information on these devices may be available on www.onsemi.com.
2.20 2.50 4.70
2.65 MAX
2.45 1.90 B 0.203 0.050 0.30 0.05 2.15 1.65 A
0.13 M C B A
C 3.95 3.30 B 2.20 1.91 B 5.60 5.08 B 4.75 4.05
0.13 M C B AB
A 0.41 0.15 1.60 0.75 R0.15 4X 0.45 0 − 8° DETAIL A SCALE 20 : 1 LAND PATTERN RECOMMENDATION GAUGE PLANE NOTES: A. EXCEPT WHERE NOTED CONFORMS TO JEDEC DO214 VARIATION AA. B DOES NOT COMPLY JEDEC STD. VALUE. C. ALL DIMENSIONS ARE IN MILLIMETERS. D. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. E. DIMENSION AND TOLERANCE AS PER ASME Y14.5−1994. F. LAND PATTERN STD. DIOM5336X240M. MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98AON13441GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SMB onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales